Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Regulation of Cathode‐Electrolyte Interphase via Electrolyte Additives in Lithium Ion Batteries

As the power supply of the prosperous new energy products, advanced lithium ion batteries (LIBs) are widely applied to portable energy equipment and large‐scale energy storage systems. To broaden the applicable range, considerable endeavours have been devoted towards improving the energy and power density of LIBs. However, the side reaction caused by the close contact between the electrode (particularly the cathode) and the electrolyte leads to capacity decay and structural degradation, which is a tricky problem to be solved. In order to overcome this obstacle, the researchers focused their attention on electrolyte additives. By adding additives to the electrolyte, the construction of a stable cathode‐electrolyte interphase (CEI) between the cathode and the electrolyte has been proven to competently elevate the overall electrochemical performance of LIBs. However, how to choose electrolyte additives that match different cathode systems ideally to achieve stable CEI layer construction and high‐performance LIBs is still in the stage of repeated experiments and exploration. This article specifically introduces the working mechanism of diverse electrolyte additives for forming a stable CEI layer and summarizes the latest research progress in the application of electrolyte additives for LIBs with diverse cathode materials. Finally, we tentatively set forth recommendations on the screening and customization of ideal additives required for the construction of robust CEI layer in LIBs. We believe this minireview will have a certain reference value for the design and construction of stable CEI layer to realize desirable performance of LIBs.     

Solvent‐Free Self‐Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic‐organic self‐assembly process. Here, we develop a facile, general, and high throughput solvent‐free self‐assembly strategy to synthesize a series of MMOs including single‐component MMOs and multi‐component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self‐assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

Photoinduced Copper‐Catalyzed Asymmetric Decarboxylative Alkynylation with Terminal Alkynes

We describe a photoinduced copper‐catalyzed asymmetric radical decarboxylative alkynylation of bench‐stable N‐hydroxyphthalimide(NHP)‐type esters of racemic alkyl carboxylic acids with terminal alkynes, which provides a flexible platform for the construction of chiral C(sp³)?C(sp) bonds. Critical to the success of this process are not only the use of the copper catalyst as a dual photo‐ and cross‐coupling catalyst but also tuning of the NHP‐type esters to inhibit the facile homodimerization of the alkyl radical and terminal alkyne, respectively. Owing to the use of stable and easily available NHP‐type esters, the reaction features a broader substrate scope compared with reactions using the alkyl halide counterparts, covering (hetero)benzyl‐, allyl‐, and aminocarbonyl‐substituted carboxylic acid derivatives, and (hetero)aryl and alkyl as well as silyl alkynes, thus providing a vital complementary approach to the previously reported method.     

Gelation Inside Block Copolymer Aggregates and Organic/Inorganic Nanohybrids

Summary: Like in many other cases, block copolymers bearing alkoxysilyl groups in one segment self‐assemble into aggregates. However, they may allow one to study the sol‐gel reaction by making use of the gelable groups located in the domains of the aggregates, therefore, the gelation process can be made in a selected domain of the nanoscale. As a result, the organic nanostructure is transformed into an organic/inorganic hybrid. The process of using covalently grafted alkoxysilane groups along the block copolymer precursors is applicable not only to the aggregates formed in solution, but also to the other forms of aggregates in melts, thin films, and interfaces. In this feature article, this emerging field is introduced, mainly focusing on the gelation that occurs inside the preformed block copolymer aggregates in solution. The morphologically fixed hybrid nanoparticles, such as spheres, hollow particles, and complex hollow particles, are presented and discussed. This technology has great potentials in the fields of nanomaterials and nanotechnologies, since various organic/inorganic hybrid nanoparticles and nanostructures can be effectively generated using this process.

Gelation in preformed block‐copolymer aggregates generates controlled structures.     

Diaqua­bis[2′‐(4,5‐diaza­fluoren‐9‐yl­idene)picolinohydrazidato‐κ2N,O]zinc(II) tetra­hydrate: a metal–water chain complex containing cyclic water hexa­mers

In the title compound, [Zn(C₁₇H₁₀N₅O)₂(H₂O)₂]·4H₂O, cyclic water hexa­mers forming one‐dimensional metal–water chains are observed. The water clusters are trapped by the co‐operative association of coordination inter­actions and hydrogen bonds. The Zn^II ion resides on a centre of symmetry and is in an octa­hedral coordination environment comprising two O atoms and two N atoms from two 2′‐(4,5‐diaza­fluoren‐9‐yl­idene)picolinohydrazidate ligands and two water mol­ecules.     

Biosurfactant trehalose lipid‐enhanced ultrasound‐assisted micellar extraction and determination of the main antioxidant compounds from functional plant tea

Hydrosoluble trehalose lipid (a biosurfactant) was employed for the first time as a green extraction solution to extract the main antioxidant compounds (geniposidic acid, chlorogenic acid, caffeic acid, and rutin) from functional plant tea (Eucommia ulmoides leaves). Single‐factor tests and response surface methodology were employed to optimize the extraction conditions for ultrasound‐assisted micellar extraction combined with ultra‐high‐performance liquid chromatography in succession. A Box‐Behnken design (three‐level, three‐factorial) was used to determine the effects of extraction solvent concentration (1–5 mg/mL), extraction solvent volume (5–15 mL), and extraction time (20–40 min) at a uniform ultrasonic power and temperature. In consequence, the best analyte extraction yields could be attained when the trehalose lipid solution concentration was prepared at 3 mg/mL, the trehalose lipid solution volume was 10 mL and the extraction time was set to 35 min. In addition, the recoveries of the antioxidants from Eucommia ulmoides leaves analyzed by this analytical method ranged from 98.2 to 102%. These results indicated that biosurfactant‐enhanced ultrasound‐assisted micellar extraction coupled with a simple ultra‐high‐performance liquid chromatography method could be effectively applied in the extraction and analysis of antioxidants from Eucommia ulmoides leaf samples.     

Untargeted metabolomic study on the insomnia effect of Suan‐Zao‐Ren decoction in the rat serum and brain using ultra‐high‐performance liquid chromatography quadrupole time‐of‐flight mass spectrometry combined with data processing analysis

Insomnia is a common clinical disease that can seriously damage the normal lives of sufferers. Suan‐Zao‐Ren decoction has been used to treat insomnia for a long time. However, the underlying molecular mechanism of Suan‐Zao‐Ren decoction is still not clear. In this study, the nontargeted metabolomics based on high‐resolution mass spectrometry and multiple statistical approaches were initially used to investigate the changes of potential serum and brain biomarkers and metabolic pathways in the insomnia model rat. Principal component analysis‐discriminate analysis indicated that the Suan‐Zao‐Ren decoction treatment improved the metabolic phenotype insomnia. Moreover, the heatmap analysis identified the most important biomarkers involved in insomnia. According to the pathway analysis, phenylalanine metabolism, tryptophan metabolism, and so on were recognized as the most affected metabolic pathways associated with insomnia disease. These findings provided a comprehensive understanding of the regulative effects of Suan‐Zao‐Ren decoction on the host metabolic phenotype of the insomnia rats. Our work demonstrated that the metabolomics approach is a promising tool that could help us to conduct the exploration of the therapeutic effects and mechanism of traditional Chinese medicines.     

Chemical profiling and marker characterization of Huangqin decoction prepared with three types of peony root by liquid chromatography with electrospray ionization mass spectrometry

Clarification of the quality and biological effect equivalence of traditional Chinese medicines containing multi‐origin species is essential to improve their current quality standards, and also is the core problem to clarify the origins of single herbs with multi‐species in Chinese formulas that will guarantee their clinical application. Huangqin decoction is the typical one of multi‐origin formulas frequently used in traditional Chinese medicine and Kampo medicine. An ultra high performance liquid chromatography with electrospray ionization–tandem mass spectrometry was developed for chemical profiling and marker quantification of Huangqin decoction prepared with two different original types of peony root, white and red peony root. Forty‐seven main peaks in chemical profiling of Huangqin decoction prepared with white and red peony root were identified: nine were from peony root, 20 from baical skullcap root, 17 from licorice root, and one from jujubae fruit. The markers characteristics of the respective types of peony root in Huangqin decoction differ from that in single herbs, especially in terms of monoterpenoids and hydrolysable tannins. Subsequently, 17 representative markers in Huangqin decoction prepared with three types of peony root and their chemical characteristics and content distribution were carried out.