排序方式: 共有52条查询结果,搜索用时 15 毫秒
21.
Dattatray J. Late Bin Liu H. S. S. Ramakrishna Matte C. N. R. Rao Vinayak P. Dravid 《Advanced functional materials》2012,22(9):1894-1905
There has been emerging interest in exploring single‐sheet 2D layered structures other than graphene to explore potentially interesting properties and phenomena. The preparation, isolation and rapid unambiguous characterization of large size ultrathin layers of MoS2, GaS, and GaSe deposited onto SiO2/Si substrates is reported. Optical color contrast is identified using reflection optical microscopy for layers with various thicknesses. The optical contrast of these thin layers is correlated with atomic force microscopy (AFM) and Raman spectroscopy to determine the exact thickness and to calculate number of the atomic layers present in the thin flakes and sheets. Collectively, optical microscopy, AFM, and Raman spectroscopy combined with Raman imaging data are analyzed to determine the thickness (and thus, the number of unit layers) of the MoS2, GaS, and GaSe ultrathin flakes in a fast, non‐destructive, and unambiguous manner. These findings may enable experimental access to and unambiguous determination of layered chalcogenides for scientific exploration and potential technological applications. 相似文献
22.
23.
High performance thermoelectrics from earth-abundant materials: enhanced figure of merit in PbS by second phase nanostructures 总被引:1,自引:0,他引:1
Zhao LD Lo SH He J Li H Biswas K Androulakis J Wu CI Hogan TP Chung DY Dravid VP Kanatzidis MG 《Journal of the American Chemical Society》2011,133(50):20476-20487
Lead sulfide, a compound consisting of elements with high natural abundance, can be converted into an excellent thermoelectric material. We report extensive doping studies, which show that the power factor maximum for pure n-type PbS can be raised substantially to ~12 μW cm(-1) K(-2) at >723 K using 1.0 mol % PbCl(2) as the electron donor dopant. We also report that the lattice thermal conductivity of PbS can be greatly reduced by adding selected metal sulfide phases. The thermal conductivity at 723 K can be reduced by ~50%, 52%, 30%, and 42% through introduction of up to 5.0 mol % Bi(2)S(3), Sb(2)S(3), SrS, and CaS, respectively. These phases form as nanoscale precipitates in the PbS matrix, as confirmed by transmission electron microscopy (TEM), and the experimental results show that they cause huge phonon scattering. As a consequence of this nanostructuring, ZT values as high as 0.8 and 0.78 at 723 K can be obtained for nominal bulk PbS material. When processed with spark plasma sintering, PbS samples with 1.0 mol % Bi(2)S(3) dispersion phase and doped with 1.0 mol % PbCl(2) show even lower levels of lattice thermal conductivity and further enhanced ZT values of 1.1 at 923 K. The promising thermoelectric properties promote PbS as a robust alternative to PbTe and other thermoelectric materials. 相似文献
24.
Vinayak P. Dravid Hong Zhang 《Physica C: Superconductivity and its Applications》1992,200(3-4):349-358
The technique of transmission electron energy loss spectrometry (EELS) in parallel detection has been utilized to analyze the fine structures associated with the O K and Cu L3 absorption edges of recently discovered Y1−xCaxSr2Cu2GaO7 (0.1 ≤ x ≤ 0.4) series of compounds, which exhibit superconductivity when annealed under high-pressure oxygen atmosphere. We find subtle but significant changes in EELS spectral features of nonsuperconducting and superconducting specimens of these compounds. A broad pre-edge feature is observed below the O K absorption edge, at about 528.2 eV which emerges with Ca-doping alone. Evidence is presented for another O K secondary pre-edge feature, at about 1.1 eV below the first O K pre-edge feature in only those specimens which have undergone high-pressure oxygen treatment (i.e. superconducting specimens). We interpret the O K pre-edge feature as due to formation of holes on oxygen sites and propose that the first broad pre-edge feature (at 528.2 eV) is associated with holes on oxygen sites other than the CuO2 planes, which are responsible for normal conductivity. The second smaller pre-edge feature (at 527.1 eV) is most probably associated with holes in the CuO2 planes, which are associated with superconductivity in this system. The presence of a secondary smaller O K pre-edge feature in the superconducting specimens appears to correlate well with a broad shoulder on the high energy side of the Cu L3 edge. The results are interpreted in terms of oxidation of CuO2 planes through charge transfer between copper and oxygen in the CuO2 planes, i.e. covalent mixing of O and Cu orbitals at the Fermi level as a result of high oxygen pressure annealing. 相似文献
25.
Jiaqing He Steven N. Girard Mercouri G. Kanatzidis Vinayak P. Dravid 《Advanced functional materials》2010,20(5):764-772
The reduction of thermal conductivity, and a comprehensive understanding of the microstructural constituents that cause this reduction, represent some of the important challenges for the further development of thermoelectric materials with improved figure of merit. Model PbTe‐based thermoelectric materials that exhibit very low lattice thermal conductivity have been chosen for this microstructure–thermal conductivity correlation study. The nominal PbTe0.7S0.3 composition spinodally decomposes into two phases: PbTe and PbS. Orderly misfit dislocations, incomplete relaxed strain, and structure‐modulated contrast rather than composition‐modulated contrast are observed at the boundaries between the two phases. Furthermore, the samples also contain regularly shaped nanometer‐scale precipitates. The theoretical calculations of the lattice thermal conductivity of the PbTe0.7S0.3 material, based on transmission electron microscopy observations, closely aligns with experimental measurements of the thermal conductivity of a very low value, ~0.8 W m?1 K?1 at room temperature, approximately 35% and 30% of the value of the lattice thermal conductivity of either PbTe and PbS, respectively. It is shown that phase boundaries, interfacial dislocations, and nanometer‐scale precipitates play an important role in enhancing phonon scattering and, therefore, in reducing the lattice thermal conductivity. 相似文献
26.
Rafal Klajn Timothy P. Gray Paul J. Wesson Benjamin D. Myers Vinayak P. Dravid Stoyan K. Smoukov Bartosz A. Grzybowski 《Advanced functional materials》2008,18(18):2763-2769
Supraspheres (SS) composed of hundreds to thousands of metal nanoparticles (NPs) and crosslinked by dithiol linkers are assembled into larger structures, which are subsequently converted into nanoporous metals (NMs). Conversion is achieved by heating which removes organic molecules stabilizing the NPs and allows for NP fusion. Heating of SS solutions leads to NMs of overall macroscopic dimensions; localized radiation using collimated electron beam is used to prepare metallized surface micropatterns. Depending on the composition of supraspherical precursors, nanoporous materials composed of up to three metals can be obtained. Strategies for controlling pore size and nanoscale surface roughness of these materials are discussed. 相似文献
27.
Jingshan S. Du Peng-Cheng Chen Dr. Brian Meckes Dr. Zhuang Xie Jinghan Zhu Yuan Liu Prof. Vinayak P. Dravid Prof. Chad A. Mirkin 《Angewandte Chemie (International ed. in English)》2017,56(26):7625-7629
Multicomponent nanoparticles can be synthesized with either homogeneous or phase-segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal-oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized by using scanning probe block copolymer lithography and characterized using correlated electron microscopy. These studies revealed that the miscibility, ratio of the metallic components, and the synthesis temperature determine the crystal structure and architecture of the nanoparticles. A Co-Ni-O system forms a rock salt structure largely owing to the miscibility of CoO and NiO, while Cu-Ni-O, which has large miscibility gaps, forms either homogeneous oxides, heterojunctions, or alloys depending on the annealing temperature and composition. Moreover, a higher-ordered structure, Co-Ni-Cu-O, was found to follow the behavior of lower ordered systems. 相似文献
28.
29.
Large‐Scale Fabrication of MoS2 Ribbons and Their Light‐Induced Electronic/Thermal Properties: Dichotomies in the Structural and Defect Engineering
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Yuan Li Emily C. Moy Akshay A. Murthy Shiqiang Hao Jeffrey D. Cain Eve D. Hanson Jennifer G. DiStefano Woo Hyun Chae Qianqian Li Chris Wolverton Xinqi Chen Vinayak P. Dravid 《Advanced functional materials》2018,28(13)
Controlled design and patterning of layered transition metal dichalcogenides (TMDs) into specific dimensions and geometries hold great potential for next‐generation micro/nanoscale electronic applications. Herein, the large‐scale fabrication of MoS2 ribbons with widths ranging from micro‐ to nanoscale is reported. Their unique electric and thermal properties introduced by the shape change and defect creation are also demonstrated, with particular focus on the performance associated with light–matter interactions. The theoretical calculation indicates significantly increased absorption and scattering efficiency of the MoS2 ribbons with decreasing width. As a result, enhanced photocarrier generation ability is detected on their phototransistors with defect‐modulated light‐response behavior. The light‐induced thermal transport properties of the MoS2 ribbons are further studied. A decreased thermal conductivity is observed on narrower ribbons, attributed to the defects created during fabrication. It is also found that the effect of phonon scattering at ribbon edges on their thermal conductivity is insignificant, and the thermal transport has no obvious dependence on the ribbon direction at such width scale. This study evaluates the prospects for designing and fabricating TMD semiconductors with specific geometries for future optoelectronic applications. 相似文献
30.