Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Simple preparation of polymer supported IBX esters and amides and their oxidative properties

Novel polymer supported IBX esters and amides were prepared in two steps, which were the coupling of 2-iodobenzoic acid to a hydroxy or amino polystyrene followed by activation of the intermediate product. These polymer supported reagents were tested as oxidants by the conversion of a series of alcohols to the corresponding aldehydes or ketones. We found that the polymer supported IBX amides displayed excellent oxidative activity, in that they oxidized benzyl alcohol to benzaldehyde completely within 1 h at an oxidant to alcohol ratio of 2 to 1.     

Automated hollow fiber-protected dynamic liquid-phase microextraction of pesticides for gas chromatography-mass spectrometric analysis

Dynamic liquid-phase microextraction (LPME) controlled by a programmable syringe pump was evaluated for extracting pesticides in water prior to GC-MS analysis. A conventional microsyringe with a 1.3-cm length of hollow fiber attached to its needle was connected to a syringe pump to perform the extraction. The microsyringe was used as both the microextraction device as well as the sample introduction device for GC-MS analysis. The attached hollow fiber served as the "holder" and protector" of 3 microl of organic solvent. The solvent was repeatedly withdrawn into and discharged from the hollow fiber by the syringe pump. Pesticides were extracted from 4-ml water samples into the organic solvent impregnated in the hollow fiber. The effects of organic solvents, plunger movement pattern, agitation and extraction time were investigated. Good repeatabilities of extraction performance were obtained, with the RSD values ranging from 3.0% (alachlor) to 9.8% (4-chlorophenol) for the 14 pesticides; most RSD values were under 5.0%. The method provided a 490-fold preconcentration of the target pesticides. The limits of detection were in the range of 0.01-5.1 microg/l (S/N = 3) in the GC-MS selected ion monitoring mode. In addition, sample clean-up was achieved during LPME because of the selectivity of the hollow fiber, which prevented undesirable large molecules from being extracted. A slurry sample (mixture of 40 mg soil/ml of water) containing seven pesticides was extracted using this method which also gave good linearity and precision (most RSDs <7.0%, n = 3).     

Synthesis of the isomeric monomethyl derivatives of the novel naphtho[2′,1′:4,5]thieno[2,3-c]quinoline ring system

The synthesis of the novel naphtho[2′,1′:4,5]thieno[2,3-c]quinoline (11) ring system and four of the isomeric monomethyl derivatives is described.     

Aminocyclodextrins to facilitate the deprotonation of 4-tert-butyl-alpha-nitrotoluene

6A-Amino-6A-deoxy-beta-cyclodextrin enhances the rate of the deprotonation of 4-tert-butyl-alpha-nitrotoluene. The rate constants for reaction of the cyclodextrin-bound species, kinc = 4 x 10(-3), 9 x 10(-3) and 19 x 10(-3) s(-1), at pH 6.0, 6.5 and 7.0, respectively, in 0.1 mol dm(-3) aqueous phosphate buffer containing 1% methanol at 298 K. These rate constants correspond to a rate acceleration (kinc/kun) of ca. 10 times at each pH. Under the same conditions, 6A-dimethylamino-6A-deoxy-beta-cyclodextrin and 6A-(2-aminoethylamino)-6A-deoxy-beta-cyclodextrin are more effective; at pH 6.0, 6.5 and 7.0, for the former, kinc = 3 x 10(-2), 7 x 10(-2) and 12 x 10(-2) s(-1), whilst for the latter, kinc = 4 x 10(-2), 5 x 10(-2) and 9 x 10(-2) s(-1), respectively. Each cyclodextrin also decreases the pKa of the nitrotoluene, from 6.8 in free solution, to 6.2 when bound. The accelerated deprotonation by 6A-amino-6A-deoxy-beta-cyclodextrin is reflected in the enhanced rates of hydrogen-deuterium exchange of the nitrotoluene in deuterium oxide, and in the conjugate addition of the nitrotoluene to methyl vinyl ketone in aqueous solution.     

Probing ruthenium-acetylide bonding interactions: synthesis, electrochemistry, and spectroscopic studies of acetylide-ruthenium complexes supported by tetradentate macrocyclic amine and diphosphine ligands

The synthesis and spectroscopic properties of trans-[RuL4(C[triple bond]CAr)2] (L4 = two 1,2-bis(dimethylphosphino)ethane, (dmpe)2; 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane, 16-TMC; 1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane, N2O2) are described. Investigations into the effects of varying the [RuL4] core, acetylide ligands, and acetylide chain length for the [(-)C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph] and [(-)C[triple bond]C(C6H4)(n-1)Ph] (n = 1-3) series upon the electronic and electrochemical characteristics of trans-[RuL4(C[triple bond]CAr)2](0/+) are presented. DFT and TD-DFT calculations have been performed on trans-[Ru(L')4(C[triple bond]CAr)2](0/+) (L' = PH3 and NH3) to examine the metal-acetylide pi-interaction and the nature of the associated electronic transition(s). It was observed that (1) the relationship between the transition energy and 1/n for trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph}2] (n = 1-3) is linear, and (2) the sum of the d(pi)(Ru(II)) --> pi*(C[triple bond]CAr) MLCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2] and the pi(C[triple bond]CAr) --> d(pi)(Ru(III)) LMCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]+ corresponds to the intraligand pi pi* absorption energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]. The crystal structure of trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)2Ph}2] shows that the two edges of the molecule are separated by 41.7 A. The electrochemical and spectroscopic properties of these complexes can be systematically tuned by modifying L4 and Ar to give E(1/2) values for oxidation of trans-[RuL4(C[triple bond]CAr)2] that span over 870 mV and lambda(max) values of trans-[RuL4(C[triple bond]CAr)2] that range from 19,230 to 31,750 cm(-1). The overall experimental findings suggest that the pi-back-bonding interaction in trans-[RuL4(C[triple bond]CAr)2] is weak and the [RuL4] moiety in these molecules may be considered to be playing a "dopant" role in a linear rigid pi-conjugated rod.     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Force Measurements between Semifluorinated Thiolate Self-Assembled Monolayers: Long-Range Hydrophobic Interactions and Surface Charge

Long-range interactions between self-assembled monolayers (SAMs) of semifluorinated alkanethiols have been studied by direct force measurements in water and aqueous NaCl solutions. SAMs prepared from three different thiols, with identical fluorinated head groups but varying hydrocarbon spacer lengths, were investigated: CF(3)(CF(2))(9)(CH(2))(x)SH, where x=2, 11, or 17. Force measurements show that the interactions in water and electrolyte solutions are composed of both double-layer interactions emerging from what appears to be charges adsorbed onto the surfaces and long-range "hydrophobic" attractions, in excess of the expected van der Waals forces. The three investigated thiols produce similar results in force measurements, though the contact angles with water are slightly different. The "hydrophobic" attraction has the form of step-like attractive discontinuities in the force profiles at separations ranging from 20 to 40 nm, caused by bridging of microscopic bubbles residing at the surfaces. The shape or range of these discontinuities are not significantly affected by replacement of the water with either 1 mM or 1 M NaCl solutions. The origin of the charges causing the electrostatic double-layer interaction is unclear, but some possible causes are discussed. Copyright 2001 Academic Press.