Active control of the depletion boundary layers in microfluidic electrochemical reactors

In this paper, we describe three methods to improve the performance of pressure-driven laminar flow-based microreactors by manipulating reaction-depletion boundary layers to overcome mass transfer limitations at reactive surfaces on the walls, such as electrodes. The transport rate of the reactants to the reactive surfaces is enhanced by (i) removing the depleted zone through multiple periodically-placed outlets; (ii) adding fresh reactants through multiple periodically-placed inlets along the reactive surface; or (iii) producing a spiraling, transverse flow through the integration of herringbone ridges along the channel walls. For approaches (i) and (ii), the network of microfluidic channels needs to be designed such that under the operating conditions used the right amount of boundary layer at each outlet or inlet is removed or replenished, respectively. Here, we report a set of design rules, derived with the help of a fluidic resistance circuit model, to aid in the design of appropriate microfluidic networks. Also, the actual enhancement of the performance of the electrochemical microreactor, i.e. chemical conversion efficiency, using multiple inlets, multiple outlets, or herringbone ridges is reported.     

Through‐the‐glass spectroscopic ellipsometry for analysis of CdTe thin‐film solar cells in the superstrate configuration

Polycrystalline CdS/CdTe thin‐film solar cells in the superstrate configuration have been studied by spectroscopic ellipsometry (SE) using glass side illumination. In this measurement method, the first reflection from the ambient/glass interface is rejected, whereas the second reflection from the glass/film‐stack interface is collected; higher order reflections are also rejected. The SE analysis incorporates parameterized dielectric functions ε for solar cell component materials obtained by in situ and variable‐angle SE. In the SE analysis of the complete cells, a step‐wise procedure ranks the fitting parameters, including thicknesses and those defining the spectra in ε, according to their ability to reduce the root‐mean‐square deviation between the simulated and measured SE spectra. The best fit thicknesses from this analysis are found to be consistent with electron microscopy. Based on the SE results, the solar cell quantum efficiency (QE) can be simulated without any free parameters, and comparisons with measured QE enable optical model refinements as well as identification of optical and electronic losses. These capabilities have wide applications in photovoltaic module mapping and in‐line monitoring. Copyright © 2016 John Wiley & Sons, Ltd.     

Size-dependent structural evolution and chemical reactivity of gold clusters.

Ground-state structures and other experimentally relevant isomers of Au(15) (-) to Au(24) (-) clusters are determined through joint first-principles density functional theory and photoelectron spectroscopy measurements. Subsequent calculations of molecular O(2) adsorption to the optimal cluster structures reveal a size-dependent reactivity pattern that agrees well with earlier experiments. A detailed analysis of the underlying electronic structure shows that the chemical reactivity of the gold cluster anions can be elucidated in terms of a partial-jellium picture, where delocalized electrons occupying electronic shells move over the ionic skeleton, whose geometric structure is strongly influenced by the directional bonding associated with the highly localized "d-band" electrons.     

Segregation in binary mixtures under gravity

We employ kinetic theory for a binary mixture to study segregation by size and/or mass in a gravitational field. Simple segregation criteria are obtained for spheres and disks that are supported by numerical simulations.     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

Computational study of conformational preferences of thioamide-containing azaglycine peptides

The effect of thioamide substitution on the conformational stability of an azaglycine-containing peptide, For-AzaGly-NH2 (1), was investigated for the sake of finding possible applications by using ab initio and DFT methods. As model compounds, For-[psiCSNH]-AzaGly-NH2 (2), For-AzaGly-[psiCSNH]-NH2 (3), and For-[psiCSNH]-AzaGly-[psiCSNH]-NH2 (4) were used. Two-dimensional phi-psi potential energy surfaces (PESs) for 2-4 were calculated at the B3LYP/6-31G*//HF/6-31G* level in gas (epsilon = 1.0) and in water (epsilon = 78.4) by applying the isodensity polarizable continuum model (IPCM) method. On the basis of these PESs, the minimum energy conformations for 2-4 were characterized at the B3LYP level with 6-31G*, 6-311G**, and 6-31+G** basis sets. The remarkable structural effect of thioamide substitution for 2-4 is that beta-strand structure is observed as a global or local minimum. The minima of 2-4 are also compared with those for glycine and thioamide-containing glycine peptides. Our theoretical results demonstrate that compounds 2-4 would be used to design controllable secondary structures.     

A new fluorescein derivative bearing a boronic acid group as a fluorescent chemosensor for fluoride ion

A new fluorescein derivative 1 bearing a boronic acid group was investigated as a fluorescent chemosensor for F-. An off-on type fluorescence enhancement was observed by the blocking of the photoinduced electron transfer mechanism, which was induced by the interaction between fluoride and boronic acid moiety.     

A sorbitol-selective fluorescence sensor

A new anthracene derivative bearing two phenylboronic acid groups at the 1,8-positions was prepared and its binding properties towards sorbitol, xylitol, fructose, glucose and galactose have been studied using fluorescence analysis.