A simple and accurate method of probability of bit error analysisfor asynchronous band-limited DS-CDMA systems

This paper considers probability of bit error (P_e) analysis in asynchronous band-limited direct-sequence code-division multiple-access (DS-CDMA) systems. It presents a simple and accurate method of P_e analysis. The proposed method can serve as an attractive alternative to the only two techniques currently available for band-limited systems: the standard Gaussian approximation (SGA) and the characteristic function method. The former is prone to inaccuracy while the latter, large computational complexity. The method generalizes the simplified improved Gaussian approximation (SIGA) derived previously for rectangular pulses. This paper also outlines a generalization of another method referred to as the improved Gaussian approximation (IGA). Numerical examples demonstrate the far greater accuracy of the generalized SIGA with respect to the SGA. The examples consider the IS-95 and square-root raised cosine (Sqrt-RC) pulses as well as uniform and nonuniform received power conditions     

A wideband monolithic RMS-DC converter using micromachineddiaphragm structures

This paper reports a monolithic rms-dc converter for measuring wideband rms signals. Two identical thermoelements for thermal rms-dc conversion are formed using planar diaphragm structures and micromachined dielectric windows. Each thermoelement consists of two polysilicon heaters and a thin-film temperature sensor located on a window and operated at constant temperature using on-chip control feedback circuitry. The thermoelements achieve a thermal efficiency greater than 7°C/mW with a thermal time constant less than 5 ms. The on-chip control circuitry is realized using a standard 3 μm p-well CMOS process with minor modifications for process compatibility with the dielectric window formation. This converter measures rms signals over a full scale range of 1 Vrms, handles crest factors in excess of 5, exhibits a typical nonlinearity of less than 1%, and achieves a 3 dB bandwidth greater than 20 MHz     

A fiber depolarizer using polarization beam splitter loop structure for narrow linewidth light source

A new fiber depolarizer employing a polarization beam splitter loop structure is proposed and demonstrated. The depolarizer is devised for broad-band operation and the depolarization of narrow linewidth light source without any help of polarization controllers or Faraday rotator mirrors. A polarizing method is developed that shows good performance without polarization control unit. Therefore, the proposed depolarizer can be cost-effective and easily configured. From experiments, low output degree of polarization less than 10% is obtained for a narrow linewidth light source.     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

K- and Q-bands CMOS frequency sources with X-band quadrature VCO

Fully integrated 10-, 20-, and 40-GHz frequency sources are presented, which are implemented with a 0.18-/spl mu/m CMOS process. A 10-GHz quadrature voltage-controlled oscillator (QVCO) is designed to have output with a low dc level, which can be effectively followed by a frequency multiplier. The proposed multipliers generate signals of 20 and 40 GHz using the harmonics of the QVCO. To have more harmonic power, a frequency doubler with pinchoff clipping is used without any buffers or dc-level shifters. The QVCO has a low phase noise of -118.67 dBc/Hz at a 1-MHz offset frequency with a 1.8-V power supply. The transistor size effect on phase noise is investigated. The frequency doubler has a low phase noise of -111.67 dBc/Hz at a 1-MHz offset frequency is measured, which is 7 dB higher than a phase noise of the QVCO. The doubler can be tuned between 19.8-22 GHz and the output is -6.83 dBm. A fourth-order frequency multiplier, which is used to obtain 40-GHz outputs, shows a phase noise of -102.0 dBc/Hz at 1-MHz offset frequency with the output power of -18.0 dBm. A large tuning range of 39.3-43.67 GHz (10%) is observed.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Analytical formulas for the velocity field induced by an infinitely thin vortex ring

Three different analytical solutions are presented for a potential vortex ring using three different streamfunctions. Verification studies confirm that all three approaches are valid. It is found that the solution obtained using the Biot–Savart law is the most efficient method due to its simplicity. It is shown that all analytical results are accurate to within machine accuracy and sample calculations are included. Copyright © 2004 John Wiley & Sons, Ltd.     

On the stationary Lp-approximation power to derivatives by radial basis function interpolation

In this paper, we consider approximation to derivatives of a function by using radial basis function interpolation. Most of well-known theories for this problem provide error analysis in terms of the so-called native space, say C_φ. However, if a basis function φ is smooth, the space C_φ is extremely small. Thus, the purpose of this study is to extend this result to functions in the homogenous Sobolev space.