MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

Optimal phases for a family of quadriphase CDMA sequences

Signature sequences with good even even and odd (or polyphase) correlations are crucial for asynchronous code-division multiple access (CDMA). When the data sequence is random, the even and odd (or polyphase) correlations are equally important. However, for most known signature sequences, only their even correlations were analyzed. It appears that determining the odd (or the polyphase) correlations is generally a very hard problem since the odd (or the polyphase) correlations depend on the phases of the signature sequences. Sole (1989), Boztas, Hammons, and Kumar (1992) found a family of quadriphase sequences that are asymptotically optimal. These sequences gain a factor √2 in terms of their maximum periodic even correlations when compared with the best possible binary phase-shift keying (BPSK) sequences. We find the optimal phases of these sequences. The optimality is in the sense that at these phases, the mean square values of the even, odd, and the polyphase correlations are minimal, and achieve the Welch (1974) bound-equality simultaneously. Furthermore, we show that at these phases, the average user interference of these sequences is always smaller than that of the ideal random signature sequences. Comprehensive analytical and numerical results show that good phase sequences can offer a nonnegligible amount of gain over bad phase sequences at modest and high signal-to-noise ratios     

Chaotic frequency hopping sequences

This letter describes a novel family of frequency hopping sequences generated by chaotic systems. The sequences give a uniform spread over the entire frequency bandwidth. In addition to having good Hamming correlation properties, they possess ideal linear span. The sequences produce almost as good performance as random hopping patterns when used in frequency hopping code-division multiple-access (FH/CDMA) systems. Many numerical examples based on a digital chaos generator are presented     

多元K-拟全纯函数及其正规定则

研究函数族的正规性定则是复变函数论中的一个重要且有意义的工作．引进多元K-拟全纯函数的定义，并给出了多元K-拟全纯函数族的一个正规定则．     

Operation of strained-layer (In,Ga)As quantum well lasers preparedon (112)B GaAs substrate

The operation of (In,Ga)As quantum well lasers prepared on [112]-oriented GaAs substrates is reported. Threshold current densities as low as 187 A/cm² for a 1.57 mm-long device have been obtained under pulsed-mode operation. The demonstration of laser action in a heterostructure grown on the [112]-oriented substrate is important for the design of blue-green light emitters by second harmonic generation     

Analogue implementation of a neural network controller for UPSinverter applications

An analogue neural-network controller for UPS inverter applications is presented. The proposed neural-network controller is trained off-line using patterns obtained from a simulated controller, which had an idealized load-current-reference. Simulation results show that the proposed neural-network controller can achieve low total harmonic distortion under nonlinear loading condition and good dynamic responses under transient loading condition. To verify the performance of the proposed NN controller, a hardware inverter with an analogue neural network (NN) controller (using mainly operational amplifiers and resistors) is built. Additionally, for comparison purposes, a PI controller with optimized parameters is built. Experimental results confirm the simulation results and show the superior performance of the NN controller especially under rectifier-type loading condition. Implementing the analogue neural-network controller using programmable integrated circuits is also discussed     

激光焊接超细基胎体金刚石薄壁钻

采用激光焊接超细预合金粉胎体，开发了新的薄壁钻产品，通过对与现有的产品工艺、性能测试以及实际使用分析对比，结果表明：激光焊接与普通钎焊相比结合强度提高2－3倍，克服了胎体脱落问题，胎体耐磨性提高了50％－120％，其中轴向磨损速率提高1．2倍；钻削速度提高30．4％，工矿适应性增加，使用寿命提高25％－108％。     

Phenylene vinylene‐based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron‐deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV‐based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole‐ and electron injections, such that the device efficiency is significantly improved. Light‐emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium–Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m² at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3469–3478, 2006     

Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006