Quantification of monohydroxy-PAH metabolites in urine by solid-phase extraction with isotope dilution-GC–MS

For measurement of biomarkers from polycyclic aromatic hydrocarbon (PAH) exposure, an analytical method is described quantifying hydroxylated PAH (OH-PAH) in urine samples. This method determined monohydroxy metabolites of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, benzo[c]phenanthrene, and benz[a]anthracene. The sample preparation consisted of enzymatic hydrolysis, solid-phase extraction and derivatization with a silylating reagent. Five carbon-13 labeled standards were used for isotope dilution. Analytes were separated by gas chromatography (GC) and quantified with high-resolution mass spectrometry (HRMS). This method produced good recoveries (41-70%), linearity, and specificity. Data were corrected for blank levels from the naphthalene, fluorene, and phenanthrene metabolites. Method detection limits ranged from 2 ng L(-1) for 1-hydroxypyrene to 43.5 ng L(-1) for 1-hydroxynaphthalene. Using quality control charts from two urine pools, the method can be readily applied to biomonitoring PAH exposure.     

Photochemical interaction of polystyrene nanospheres with 193 nm pulsed laser light

The photochemical interaction of 193 nm light with polystyrene nanospheres is used to produce particles with a controlled size and morphology. Laser fluences from 0 to 0.14 J/cm2 at 10 and 50 Hz photofragment nearly monodisperse 110 nm spherical polystyrene particles. The size distributions before and after irradiation are measured with a scanning mobility particle sizer (SMPS), and the morphology of the irradiated particles is examined with a transmission electron microscope (TEM). The results show that the irradiated particles have a smaller mean diameter ( approximately 25 nm) and a number concentration more than an order of magnitude higher than nonirradiated particles. The particles are formed by nucleation of gas-phase species produced by photolytic decomposition of nanospheres. A nondimensional parameter, the photon-to-atom ratio (PAR), is used to interpret the laser-particle interaction energetics.     

Stereoselective template-directed C-glycosidation. Synthesis of 5-membered oxygen heterocycles via cation-mediated intramolecular cyclization reactions

Construction of 5-membered oxygen heterocycles by intramolecular template-directed C-glycosidation is described. Alkylation of thioglycoside 5 with enone 6 followed by enol etherification gave cyclization substrates 8. Compound 8a underwent silver(I) trifluoromethanesulfonate-mediated ring-closure to give a 1.7:1 mixture of 9 and 9β; isomer 8s gave an 8.5:1 ratio. Some derivatization reactions of the bicyclic products are described.     

Low-magnesium, <Emphasis Type="Italic">trans</Emphasis>-cleavage activity by type III,tertiary stabilized hammerhead ribozymes with stem 1 discontinuities

Background  

Low concentrations of free magnesium in the intracellular environment can present critical limitations for hammerhead ribozymes, especially for those that are designed for intermolecular (trans) cleavage of a host or pathogen RNA. Tertiary stabilizing motifs (TSM's) from natural and artificial ribozymes with a "type I" topology have been exploited to stabilize trans-cleaving hammerheads. Ribozymes with "type II" or "type III" topologies might seem incompatible with conversion to trans-cleavage designs, because opening the loop at the end of stem 1 or stem 2 to accommodate substrate binding is expected to disrupt the TSM and eliminate tertiary stabilization.     

Iminic N-bound iminophosphorano versus nitrilic n-bound iminophosphorano Os(IV) complexes: a new double derivatization of the nitrido ligand

The reactions between trans-[Os(IV)(tpy)(Cl)(2)(NCN)] (1) and PPh(3) and between trans-[Os(IV)(tpy)(Cl)(2)(NPPh(3))](+) (2) and CN(-) provide new examples of double derivatization of the nitrido ligand in an Os(VI)-nitrido complex (Os(VI)N). The nitrilic N-bound product from the first reaction, trans-[Os(II)(tpy)(Cl)(2)(NCNPPh(3))] (3), is the coordination isomer of the first iminic N-bound product from the second reaction, trans-[Os(II)(tpy)(Cl)(2)(N(CN)(PPh(3)))] (4). In CH(3)CN at 45 degrees C, 4 undergoes isomerrization to 3 followed by solvolysis and release of (N-cyano)iminophosphorane, NCNPPh(3). These reactions demonstrate new double derivatization reactions of the nitrido ligand in Os(VI)N with its implied synthetic utility.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

Analysis of rabbit tear proteins by high-pressure liquid chromatography/electrospray ionization mass spectrometry

The aim of this study was to develop a fast and reliable analytical procedure for the display of the protein components of tears that can be used to differentiate the status of the ocular surface. Using this new procedure, we analyzed the tear protein components following a corneal wound in the rabbit. Calibrated 10-microL glass, fire-polished capillary micropipettes were used to collect tears from New Zealand White rabbits prior to and daily for 9 days following a unilateral 6-mm diameter centrally placed anterior keratectomy. Tear proteins were eluted by a reversed-phase high-performance liquid chromatography (RP-HPLC) column and the tear protein profile was monitored by electrospray ionization (ESI) mass spectrometry positive total ion current (TIC) chromatography. Tear proteins were reliably separated into 17 peaks, each of which contained one or a number of protein components. The molecular weight of each protein component was determined by on-line ESI. Major tear protein components, lactoferrin, lysozyme (minimally detectable in rabbit tears), albumin, lipocalin, lipophilin and beta2-microglobulin, were tentatively identified by this method. Based on the mass spectrometric data, beta2-microglobulin was found to be glycosylated with N-acetylhexosamine. ESI-positive TIC chromatograms and mass spectra revealed comparative differences in the tear protein spectra after corneal wounding. One day after wounding, rabbit lysozyme with a molecular weight of 14,717 Da was found to be 8-fold higher in the tears of wounded eyes when compared with tears from unwounded eyes. It dropped back to normal 3 days after wounding. The expression of an unidentified tear protein with the molecular weight of 16,060 Da was also elevated after corneal wounding and returned to normal level by day 5. In this study, LC/ESI-MS was developed as a fast, reproducible and simple method for the identification and analysis of many of the protein components of the tears. Importantly, this technique also allows quantification of each component resolved in the chromatogram. This method is very suitable for mapping peptides and proteins (<80 kDa) in tears.     

Use of molecular dynamics in the design and structure determination of a photoinducible beta-hairpin

The study presented here consists of three parts. In the first, the ability of a set of differently substituted diazobenzene-based linkers to act as photoswitchable beta-turn building blocks was assessed. A 12-residue peptide known to form beta-hairpins was taken as the basis for the modeling process. The central (beta-turn) residue pair was successively replaced by six symmetrically ((o,o), (m,m), or (p,p)) substituted (aminomethyl/carboxymethyl or aminoethyl/carboxyethyl) diazobenzene derivatives leading to a set of peptides with a photoswitchable backbone conformation. The folding behavior of each peptide was then investigated by performing molecular dynamics simulations in water (4 ns) and in methanol (10 ns) at room temperature. The simulations suggest that (o,o)- and (m,m)-substituted linkers with a single methylene spacer are significantly better suited to act as photoswitchable beta-turn building blocks than the other linkers examined in this study. The peptide containing the (m,m)-substituted linker was synthesized and characterized by NMR in its cis configuration. In the second part of this study, the structure of this peptide was refined using explicit-solvent simulations and NOE distance restraints, employing a variety of refinement protocols (instantaneous and time-averaged restraining as well as unrestrained simulations). We show that for this type of systems, even short simulations provide a significant improvement in our understanding of their structure if physically meaningful force fields are employed. In the third part, unrestrained explicit-solvent simulations starting from either the NMR model structure (75 ns) or a fully extended structure (25 ns) are shown to converge to a stable beta-hairpin. The resulting ensemble is in good agreement with experimental data, indicating successful structure prediction of the investigated hairpin by classical explicit-solvent molecular dynamics simulations.