Selectivity for Cs and Sr in Nb-substituted titanosilicate with sitinakite topology

The 25% niobium substituted crystalline titanosilicate with the composition Na_1.5Nb_0.5Ti_1.5O₃SiO₄·2H₂O (Nb-TS) was synthesized under hydrothermal conditions. Its selectivity for radioactive ¹³⁷Cs and ⁸⁹Sr was compared with the TS, Na₂Ti₂O₃SiO₄·2H₂O, having sitinakite topology. The Nb-TS shows significantly higher uptake value for ¹³⁷Cs but lower for ⁸⁹Sr than the TS. To investigate the origin of selectivity, the ion exchanged Cs⁺ and Sr²⁺ forms with the composition, Cs_xNaH_yNb_0.5Ti_1.5O₃SiO₄·zH₂O (x=0.1, 0.2 and 0.3, x+y=0.5 and z=1-2) and Sr_0.2Na_0.6H_0.5Nb_0.5Ti_1.5O₃SiO₄·H₂O, respectively, were structurally characterized from the X-ray powder diffraction data using the Rietveld refinement technique. Simultaneously the kinetics of ¹³⁷Cs and ⁸⁹Sr uptake was investigated for the Nb^V free and doped samples. While the Cs⁺ and Sr²⁺ exchanged form of Nb-TS and the Cs⁺ exchanged form of TS retain the symmetry of the parent compound, the Sr²⁺ exchanged form of TS undergoes a symmetry change. The differences in the uptake of Cs⁺ and Sr²⁺ result from the different coordination environments of cesium and strontium in the eight-ring channel, that result from various hydration sites in the tunnel. The origin of selectivity appears to arise from the higher coordination number of cesium or strontium. Other effects due to Nb^V substitution are reflected in the increase of both, the a- and c-dimensions and thus the unit cell volume, and the population of water vs. Na⁺ in the channel to charge-balance the Nb⁵⁺↔Ti⁴⁺ substitution.     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications

This work is devoted to the design of a novel family of hydrosoluble biomaterials: poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐based graft copolymers. A synthesis route has been elaborated in which ω‐functionalized PVP is prepared via chain‐transfer radical polymerization, end‐group modified, and subsequently grafted onto a polyhydroxylated backbone, typically dextran or poly(vinyl alcohol). The resulting graft copolymer biomaterials are designed for use in various biomedical applications, particularly as materials with a stronger potential for plasma expansion than already existing products have. The graft copolymers are potentially degradable because the PVP grafts are connected to the polyol backbone via a hydrolytically labile carbonate or ester linkage. The degradation of the graft copolymers was performed in vitro over a period of 6 weeks. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3652–3661, 2002     

Formation of Metallo-6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrins and Their Complexation of Tryptophan in Aqueous Solution

A pH titration study shows that 6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrin (betaCDtren) forms binary metallocyclodextrins, [M(betaCDtren)](2+), for which log(K/dm(3) mol(-)(1)) = 11.65 +/- 0.06, 17.29 +/- 0.05, and 12.25 +/- 0.03, respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+), where K is the stability constant in aqueous solution at 298.2 K and I = 0.10 mol dm(-)(3) (NaClO(4)). The ternary metallocyclodextrins [M(betaCDtren)Trp](+), where Trp(-) is the tryptophan anion, are characterized by log(K/dm(3) mol(-)(1)) = 8.2 +/- 0.2 and 8.1 +/- 0.2, 9.5 +/- 0.3 and 9.4 +/- 0.2, and 8.1 +/- 0.1 and 8.3 +/- 0.1, respectively, where the first and second values represent the stepwise stability constants for the complexation of (R)- and (S)-Trp(-), respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+). From comparisons of stabilities and UV-visible spectra, the binary and ternary metallocyclodextrins appear to be six-coordinate when M(2+) = Ni(2+) and Zn(2+) and five-coordinate when M(2+) = Cu(2+). The factors affecting the stoichiometries and stabilities of the metallocyclodextrins, are discussed and comparisons are made with related systems.     

Intra- and intermolecular complexation in C6 monoazacoronand substituted cyclodextrins

The preparation of 6(A)-deoxy-6(A)-(6-(2-(1,4,7,10-tetraoxa-13-azacyclopentadecan-13-yl)acetamido)hexylamino)-alpha-cyclodextrin, 3, 6(A)-deoxy-6(A)-(6-(2-(1,4,7,10,13-pentaoxa-16-azacyclooctadecan-16-yl)acetamido)hexylamino)-alpha-cyclodextrin, 4, and their beta-cyclodextrin analogues, 5 and 6, are described. (1)H (600 MHz) ROESY NMR spectra of the C(6) substituted beta-cyclodextrins, 5 and 6, are consistent with the intramolecular complexation of their azacyclopentadecanyl- and azacyclooctadecanyl(acetamido)hexylamino substituents in the beta-cyclodextrin annulus in D(2)O at pD = 8.5 whereas those of their alpha-cyclodextrin analogues, 3 and 4 are not complexed in the alpha-cyclodextrin annulus. This is attributed to the monoazacoronand components of the substituents being able to pass through the beta-cyclodextrin annulus whereas they are too large to pass through the alpha-cyclodextrin annulus. However, the substituents of 3 and 4 are intermolecularly complexed by beta-cyclodextrin to form pseudo [2]-rotaxanes. Metallocyclodextrins are formed by 5 through complexation by the monoazacoronand substituent component for which log (K/dm(3) mol(-1))= <2, 6.34 and 5.38 for Ca(2+), Zn(2+) and La(3+), respectively, in aqueous solution at 298.2 K and I= 0.10 mol dm(-3)(NEt(4)ClO(4)).     

Digital canvas removal in paintings

The periodic structure of the underlying support of paintings on canvas can become quite prominent and disturbing in high resolution digital recordings. In this paper, we construct a new model and method for the digital removal of canvas which is considered as a noise component superimposed on the painting artwork. The high resolution of the images prohibits the efficient application of existing adaptive denoising filters. Hence, a two-step approach is proposed. First a (smoothing) Wiener filter is applied to the complete image. The second step consists of a spatially adaptive extension with low-complexity to obtain a generic digital canvas removal filter.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Assay of Kanamycin A by HPLC with Direct UV Detection

The development of a simple reversed phase ion pair liquid chromatographic method for the assay of kanamycin A has been described. Because of the lack of a UV chromophore in the structure of kanamycin A, borate complexation was used to allow direct UV detection at 205 nm. Three columns were evaluated in this study: Zorbax Extend C18 (4.6 mm × 250 mm; 5 μm), XBridge C18 (4.6 mm × 250 mm; 5 μm) and apHera C18 (4.6 mm × 250 mm; 5 μm). The mobile phase was a mixture of 0.1 M disodium tetraborate (pH 9.0) and water (20:80, v/v) supplemented with 0.5 g L^?1 sodium octanesulphonate. Final chromatographic conditions were achieved on the XBridge column at 50 °C. The method was validated according to ICH guidelines and applied to a commercially available sample. It is much faster and more specific than the current microbiological assay prescribed in the European Pharmacopoeia. No expensive equipment is necessary to perform this assay making it a viable replacement.     

Attrition patterns in a high ability programme for precollege students

Completion and performance data from 92 high ability seventh and eighth grade students in an eight‐week summer programme conducted in 1989 and sponsored by the GTE Service Corporation are examined.