Two-particle dynamics on an electrode in ac electric fields

The relative motion between pairs of negatively charged latex particles 9.7 microm in diameter and deposited on an electrode was measured by optical microscopy and image analysis. At an rms field of approximately 30 V cm(-1), the two particles moved toward each other at frequencies below 500 Hz, but they separated at 1000 Hz. In the cases of aggregation, there are several interesting characteristics. First, when the center-to-center separation of a pair was initially 6 particle radii or more apart, a transient 'incubation' period of tens of seconds was observed before the particles began to move toward each other. Second, the two particles never came into contact, rather at long times the pair maintained a stationary gap between them equal to approximately one-half the particle radius. This stationary gap between particles was also observed for the aggregation of clusters of three or more particles. Finally, the rate of approach for a pair of particles decreased as the frequency increased. Larger fields are required to move particles together in ac compared to dc fields; at 30 Hz the ac field must be 130 times greater than the dc field to achieve the same rate of approach. Taking advantage of the qualitative and quantitative differences of the cooperative motion of particles in dc vs. ac fields, one should be able to re-position particles by alternating between these two modes. We demonstrated that the same pair of particles can be brought together at low frequency (100 or 200 Hz) and then separated at high frequency (1000 Hz).     

Cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium

[reaction: see text] The cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium in DMF produced five- and six-membered cyclic compounds. Although KI was a necessary additive in the cyclization of terminal 1-bromo-2,7-enynes to give the desired products at 25 degrees C, reactions of terminal 1-bromo-2,8-enynes and internal 1-bromo-2,7-enynes with indium proceeded at 100 degrees C in DMF without KI. After cyclizations, subsequent cross-coupling reaction and iodolysis increase the usefulness of this reaction.     

Chiral polymer hosts for circularly polarized electroluminescence devices

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications. The fabrication of a CP PLED requires a polymer host that provides the appropriate chiral environment around the emitting dopant. However, chemical strategies for the design of chiral polymer hosts remain underdeveloped. We have developed new polymer hosts for CP PLED applications. These polymers were prepared through a free-radical polymerization of 3-vinylcarbazole with a chiral N-alkyl unit. This chiral unit forces the carbazole repeat units to form mutually helical half-sandwich conformers with preferred (P)-helical sense along the polymer main chain. Electronic circular dichroism measurements demonstrate the occurrence of chirality transfer from chiral monomers to achiral monomers during chain growth. The (P)-helical-sense-enriched polymer interacts diastereoselectively with an enantiomeric pair of new phosphorescent (R)- and (S)-dopants. The magnitude of the Kuhn dissymmetry factor (g_abs) for the (P)-helically-enriched polymer film doped with the (R)-dopant was found to be one order of magnitude higher than that of the film doped with the (S)-dopant. Photoluminescence dissymmetry factors (g_PL) of the order of 10⁻³ were recorded for the doped films, but the magnitude of diastereomeric enhancement decreased to that of g_abs. The chiral polymer host permits faster energy transfer to the phosphorescent dopants than the achiral polymer host. Our photophysical and morphological investigations indicate that the acceleration in the chiral polymer host is due to its longer Förster radius and improved compatibility with the dopants. Finally, multilayer CP PLEDs were fabricated and evaluated. Devices based on the chiral polymer host with the (R)- and (S)-dopants exhibit electroluminescence dissymmetry factors (g_EL) of 1.09 × 10⁻⁴ and −1.02 × 10⁻⁴ at a wavelength of 540 nm, respectively. Although challenges remain in the development of polymer hosts for CP PLEDs, our research demonstrates that chiroptical performances can be amplified by using chiral polymer hosts.

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications.     

Asymmetric lithiation-substitution sequences of substituted allylamines

[reaction: see text] (-)-Sparteine-mediated asymmetric lithiation-substitution sequences of 2- and 3-substituted N-(Boc)-N-(p-methoxyphenyl) allylic amines with electrophiles have been investigated. Asymmetric lithiation-substitutions of N-(Boc)-N-(p-methoxyphenyl) allylic amines 11, 12, 13, 14, and 15 provide highly enantioenriched enecarbamates in good yields. Further transformations to give aldehydes, acids, ketones, and a Diels-Alder adduct are reported. The 1,4-addition products from reactions of the lithiated allylic amines from 14 and 15 with conjugated activated alkenes gives enecarbamates with two and three stereogenic centers in good yields with high diastereomeric and enantiomeric ratios. Synthetic transformation of these products by acid hydrolysis and subsequent cyclization provide stereoselective access to bicyclic compounds containing four and five stereogenic centers with high diastereoselectivity and enantioselectivity. It is suggested that allyllithium complexes generated by asymmetric deprotonation react with most electrophiles with inversion of configuration.     

Arsenic trioxide-induced apoptosis is independent of stress-responsive signaling pathways but sensitive to inhibition of inducible nitric oxide synthase in HepG2 cells

Arsenic trioxide (As(2)O(3)) has been found to be remarkably effective in the treatment of patients with acute promyelocytic leukemia (APL). Although evidences for the proapoptotic activity of As(2)O(3) have been suggested in leukemic and other solid cancer cells, the nature of intracellular mechanisms is far from clear. In the present study, we investigated As(2)O(3) affect on the stress-responsive signaling pathways and pretreatment with antioxidants using HepG2 cells. When treated with micromolar concentrations of As(2)O(3), HepG2 cells became highly apoptotic paralleled with activation of caspase-3 and members of mitogen-activated protein kinases (MAPKs) including extracellular signal-regulated kinase (ERK) and c-jun NH(2)-terminal kinase (JNK) but not p38 MAP kinase. However, inhibition of each kinase activity failed to inhibit apoptosis by As(2)O(3). Addition of n-acetyl cysteine (NAC) or diphenyleneiodonium (DPI) effectively protected cells from apoptosis and significantly lowered As(2)O(3)-induced activation of caspase-3. However, neither NAC nor DPI was able to effect ERK or JNK activation induced by As(2)O(3). Guanidinoethyldisulfide dihydrochloride (GED) and 2-ethyl-2-thiopseudourea (ETU), known inhibitors of the inducible nitric oxide synthase (iNOS), also suppressed the apoptotic activity of As(2)O(3). These results suggest that As2O3 induces caspase-mediated apoptosis involving a mechanism generating oxidative stress. However, activation of some stress-responsive signaling pathways by As(2)O(3) may not be the major determinant in the course of apoptotic processes.     

New Acetylcholinesterase‐Inhibitory Pregnane Glycosides of Cynanchum atratum Roots

Three new pregnane glycosides, cynatroside A ( 1 ), cynatroside B ( 2 ), and cynatroside C ( 3 ), isolated from the roots of Cynanchum atratum (Asclepiadaceae), were characterized as 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐D ‐oleandropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐6α‐hydroxy‐4b‐ methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 1 ), 7β‐{[O‐β‐D ‐cymaropyranosyl‐(1→4)‐O‐α‐L ‐diginopyranosyl‐(1→4)‐β‐D ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 2 ), and 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐L ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 3 ), respectively. In addition, ten known constituents were identified, i.e., cynascyroside D ( 4 ), glaucoside C ( 5 ), glaucoside D ( 6 ), atratoside A ( 7 ), 2,4‐dihydroxyacetophenone ( 8 ), 4‐hydroxyacetophenone ( 9 ), syringic acid ( 10 ), azelaic acid ( 11 ), suberic acid ( 12 ), and succinic acid ( 13 ). Among these compounds, 1 – 4 significantly inhibit acetylcholinesterase activity.     

A series of tetrahomodioxacalix[4]biscrown-n. Syntheses, crystal structures, and metal binding abilities

A series of novel tetrahomodioxacalix[4]biscrowns with crown-2, crown-3, crown-4, crown-5, and crown-6 units were synthesized. Conformations of each product are dependent on the base used and their conformation stabilities. All conformations were proven by NMR spectra and/or X-ray crystal structures. The 1,3-alternate homodioxacalix[4]biscrown-4 (4b) shows the best selectivity for K+, whereas the 1,3-alternate homodioxacalix[4]crown-5 (5) does for Cs+. Those selectivities are attributable to electrostatic interaction between the metal ion and the crown ring, as well as a pi-metal complexation. However, the C-1,2-alternate conformation does not take the metal ions regardless of the crown species as a result of steric hindrance from the methylene bridge of an ArCH2Ar unit.     

Chromatographic separation of magnesium isotopes by monoazacrown bonded Merrifield peptide resins

Magnesium isotope separation was investigated by chemical ion exchange with the 1-aza-12-crown-4 (I) and the 1-aza-18-crown-6 (II) bonded Merrifield peptide resin using an elution chromatographic technique. The capacities of each novel monoazacrown ion exchanger were 1.0 meq/g for (I) and 2.3 meq/g for (II) bonded Merrifield peptide resins, respectively. The single stage separation factor was determined according to the method of Glueckauf from the elution curves and isotopic assays. The separation factors of magnesium isotope pairs, ²⁴Mg²⁺–²⁵Mg²⁺, ²⁴Mg²⁺–²⁶Mg²⁺ and ²⁵Mg²⁺–²⁶Mg²⁺ were 1.015, 1.029, and 1.014 for (I) and 1.012, 1.024, and 1.009 for (II) bonded Merrifield peptide resins, respectively.     

Complexation mechanism of olefin with silver ions dissolved in a polymer matrix and its effect on facilitated olefin transport

Remarkable separation performance of olefin/paraffin mixtures was previously reported by facilitated olefin transport through silver-based polymer electrolyte membranes. The mechanism of facilitated olefin transport in solid membranes of AgCF3SO3 dissolved in poly(N-vinyl pyrrolidone) (PVP) is investigated. In silver polymer electrolyte membranes, only free anions are present up to the 2:1 mole ratio of [C=O]:[Ag], and ion pairs start to form at a ratio of 1:1, followed by higher-order ionic aggregates above a ratio of 1:2. At silver concentrations above 3:1, the propylene permeance increases almost linearly with the total silver concentration, unexpectedly, regardless of the silver ionic constituents. It was also found that all the silver constituents, including ion pairs and higher order ionic aggregates, were completely redissolved into free anions under the propylene environment; this suggests that propylene can be a good ligand for the silver cation. From these experimental findings, a new mechanism for the complexation reaction between propylenes and silver salts in silver-polymer electrolytes was proposed. The new mechanism is consistent with the linearity between the propylene permeance and the total silver concentration regardless of the kind of the silver constituents. Therefore, the facilitated propylene transport through silver-polymer electrolytes may be associated mainly with the silver cation weakly coordinated with both carbonyl oxygen atoms and propylene.     

On-channel base stacking in microchip capillary gel electrophoresis for high-sensitivity DNA fragment analysis

We evaluated a novel strategy for high-sensitivity DNA fragment analysis in a conventional glass double-T microfluidic chip. The microchip allows for a DNA on-channel concentration based on base stacking (BS) with a microchip capillary gel electrophoretic (MCGE) separation step in a poly(vinylpyrrolidone) (PVP) sieving matrix. Depending if low conductivity caused a neutralization reaction between the hydroxide ions and the run buffer component Tris+, the stacking of DNA fragments were processed in the microchip. Compared to a conventional MCGE separation with a normal electrokinetic injection, the peak heights of 50-2650-base pair (bp) DNA fragments on the MCGE-BS separation were increased 3.9-8.0-fold. When we applied the MCGE-BS method to the analysis of a clinical sample of bovine theileria after PCR reaction, the peak height intensity of the amplified 816-bp DNA fragment from the 18S rRNA of T. buffeli was enhanced 7.0-fold compared to that of the normal injection method.