慢性胃炎、溃疡病患者血清、胃液和胃组织微量元素的测定及其临床意义

对慢性胃炎、溃疡病患者血清、胃液、胃组织中多种微量元素采用高频等离子体发射光谱法测定．结果：胃溃疡血清、胃组织钼低，Ｐ均＜０．０５；胃组织钙低，Ｐ＜０．０１．十二指肠溃疡血清、胃组织钼低，Ｐ均＜０．０５；胃组织钙高于对照组，Ｐ＜０．０１．并对健康人血清、胃液、胃组织微量元素进行测定，为科研提供了血清、胃液、胃组织微量元素的正常值。     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

Removal of strontium ions by a crosslinked copolymer containing methacrylic acid functional groups</p> </p>

Summary A tail-made polymer matrix is proposed to remove strontium ions from aqueous solutions. The removal behavior of strontium ions on a crosslinked copolymer containing methacrylic acid as functional groups was investigated as a function of sorptive concentration, time, temperature and pH. It was observed that an increase of these parameters enhanced the removal of Sr(II) ions from aqueous solution. It is found that a maximum adsorption of Sr(II) ions can be obtained on the crosslinked copolymer after 30 minutes and at pH 8. The increase of Sr(II) ion concentration in the solution resulted in an increase in the amount of Sr(II) ions adsorbed on the crosslinked copolymer containing methacrylic acid as functional groups. However, after a maximum of Sr(II) concentration in the solution, the percentage of adsorbed Sr(II) ions decreased. The adsorption data are well represented by the Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. The adsorption capacity of the copolymer and the free energy change were calculated by using the D-R isotherm. For the adsorption of Sr(II) ions on the crosslinked copolymer the thermodynamic parameters (DH°,DS° andDG°) were calculated.</p> </p>     

Furan derivatives-IX : A convenient new method of arylation of furan reaction of diazoaminobenzenes with furan and isopentyl nitrite

A convenient new method for the arylation of furan with derivatives of diazoaminobenzene and isoamyl nitrite is described. Using this method the substituted 2-(X-phenyl)furan derivatives, where X is H, 4-CH₃, 4-Cl, 4-Br, 3-Cl, 3,4-diCl, 4-NO₂, 4-COOCH₃, 4-COOH, 4-Cl-3-CF₃ and 2-(3-pyridyl)furan were prepared. The reaction of methyl 4-aminobenzoate with furan and isopentyl nitrite gave (besides 2-(4-carbmethoxyphenyl)furan) 4,4′-dicarbmethoxydiazoaminobenzene, the structure of which was proved by mass spectrometry and by synthesis. This diazoaminobenzene derivative was unstable in the reaction medium and with isopentyl nitrite and furan at 30° gave 2-(4-carbmethoxyphenyl)furan. The mechanism of the reaction is discussed.     

Gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous solutions of Fe(II)–CDTA chelate complex

Utilization of ferric chelate complex of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) for the oxidative scrubbing of H₂S and CH₃SH in Kraft mill streams can be beneficial from the standpoints of iron protection against precipitation and oxygen-mediated regenerative oxidation of the ferrous chelate CDTA. The physical solubility of methyl mercaptan in CDTA–Fe(III) complex cannot be measured directly because of oxidation of the sulfur-bearing gaseous species with the ferric chelate. Therefore, this investigation was carried out to determine the gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous iron-free CDTA solutions and non-reacting ferrous chelate solutions (CDTA–Fe(II) complex), using the static headspace method with an estimated accuracy of about 2%. Experiments with aqueous solutions of chelate concentrations varying between 38 and 300 mol m⁻³ were carried out at temperatures between 298 and 333 K and atmospheric pressure. It was shown that the methyl mercaptan solubility decreases with increasing temperature for all systems but was not much influenced, in the studied conditions, by the chelate concentration especially at larger temperatures.     

Influence of the composition of perovskites based on SrMnO<Subscript>3</Subscript> on their catalytic properties in the oxidative coupling of methane

The oxidative coupling of methane (OCM) in a periodic regime over the SrMnO₃ and its derivatives has been investigated. It has been established that partial replacement of the strontium ion by alkali metal ions leads to an increase in both catalytic activity and in selectivity with respect to higher hydrocarbons. Comparison of the results obtained in the present work with those obtained earlier for catalysts based on SrCoO₃ led to the conclusion that the Co-containing catalysts were preferable to the Mn-containing catalysts for carrying out oxidative coupling of methane in a periodic regime.__________Translated from Teoreticheskaya i Éksperimentalnaya Khimiya, Vol. 41, No. 1, pp. 30–34, January–February, 2005.     

Determination of calcium in silicate rocks by potentiometric titration with ethyleneglycol-bis-(2-Aminoethylether)tetraacetic acid and a calcium-selective electrode

The method reported for the determination of calcium in silicate rocks involves titration with ethyleneglycol-bis(2-aminoethylether)tetraacetic acid (EGTA) to a potentiometric end-point. A Crytur calcium-selective electrode is used; the selectivity constants (K_ca,x) are less than 10^-3 for Mg, Ba, Sr, K and Na. The method can be used for calcium contents of 2% or higher (and exceptionally for lower contents), in the presence of up to 60% Mg, 33% AI, 17% Fe, 5% Ba, 5% Ti, and 2.5% Mn. Al, Fe and Ti are masked with sulphosalicylic acid, barium is precipitated as its sulphate, and manganese is bound as its cyanide complex. If the magnesium content is less than that of calcium, EDTA can be used as titrant, magnesium being masked with acetylacetone.     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication     

The use of a thermally reversible bond for molecular imprinting of silica spheres

A silica monomer-estrone complex (EstSi) having a thermally cleavable urethane bond and a cross-linkable triethoxysilane group was synthesized. From EstSi and TEOS, spherical silica particles with sizes of 1.5-3 mum were prepared. The template molecules were removed from the silica matrix by heating at 180 degrees C in DMSO in the presence of water, generating a cavity with an amino group. The control silica particles that had the same sizes and shapes were obtained with aminopropyl triethoxysilane and TEOS. When ethylene glycol was added in place of H2O, an ethyl alcoholic group was formed in the cavity. Their recognition ability and specific binding for estrone were characterized by uptake experiments. The estrone-imprinted silica particles showed a much higher recognition ability than the control silica particles and higher selectivity for estrone than testosterone propionate.     

庐山儿童发中微量元素与生长发育关系的调查

调查分析了庐山５０８名１－７岁儿童发中锌，铁，铜含量，并对其与儿童生长发育的关系进行了探讨。结果表明，微量元素与生长发育密切相关。