Addressing substrate coupling in mixed-mode ICs: simulation andpower distribution synthesis

This paper describes new techniques for the simulation and power distribution synthesis of mixed analog/digital integrated circuits considering the parasitic coupling of noise through the common substrate. By spatially discretizing a simplified form of Maxwell's equations, a three-dimensional linear mesh model of the substrate is developed. For simulation, a macromodel of the fine substrate mesh is formulated and a modified version of SPICE3 is used to simulate the electrical circuit coupled with the macromodel. For synthesis, a coarse substrate mesh, and interconnect models are used to couple linear macromodels of circuit functional blocks. Asymptotic Waveform Evaluation (AWE) is used to evaluate the electrical behavior of the network at every iteration in the synthesis process. Macromodel simulations are significantly faster than device level simulations and compare accurately to measured results. Synthesis results demonstrate the critical need to constrain substrate noise and simultaneously optimize power bus geometry and pad assignment to meet performance targets     

Photonic packet switches: architectures and experimentalimplementations

Photonic packet switches offer high speed, data rate and format transparency, and flexibility required by future computer communications and cell-based telecommunications networks. In this paper, we review experimental progress in state-of-the-art photonic packet switches with an emphasis on all-optical guided-wave systems. The term all-optical implies that the data portion of a packet remains in optical format from the source to the destination. While the data remain all-optical, both optical and optoelectronic techniques have been used to process packet routing functions based on extremely simple routing protocols. An overview of the design issues for all-optical photonic packet switching is given and contrasted with electronic packet switch implementations. Low-level functions that have been experimentally implemented include routing, contention resolution, synchronization, and header regeneration. System level demonstrations, including centralized photonic switching and distributed all-optical multihop networks, will be reviewed     

ACT3: a high-speed, high-precision electrical impedance tomograph

Presents the design, implementation, and performance of Rensselaer's third-generation adaptive current tomograph, ACT3. This system uses 32 current sources and 32 phase-sensitive voltmeters to make a 32-electrode system that is capable of applying arbitrary spatial patterns of current. The instrumentation provides 16 b precision on both the current values and the real and reactive voltage readings and can collect the data for a single image in 133 ms. Additionally, the instrument is able to automatically calibrate its voltmeters and current sources and adjust the current source output impedance under computer control. The major system components are discussed in detail and performance results are given. Images obtained using stationary agar targets and a moving pendulum in a phantom as well as in vivo resistivity profiles showing human respiration are shown     

Modified FSS response from two sided and closely coupled arrays

A demonstration is presented of a way in which an affected FSS response can be achieved using a two sided structure of dipole arrays sharing the same dielectric layer. Even with these simple elements the results produced resonances well below the grating lobe region, and consequently the instability of these with oblique angles of incidence (up to 75°) was less than 1%. The key to this work was the high coupling between the arrays that was achieved by a relative displacement     

Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007     

RZ-DPSK signal regeneration based on dual-pump phase-sensitive amplification in fibers

All-optical regeneration of differential phase-shift keying signals by means of a phase-sensitive amplification scheme solely based on highly efficient four-wave mixing in fibers is theoretically and numerically studied. The analytical and numerical investigation demonstrates almost ideal phase regeneration accompanied with enhanced amplitude noise suppression in the regime of pump depletion.     

Solution-Processed n-Type Organic Field-Effect Transistors With High on /off Current Ratios Based on Fullerene Derivatives

Solution-processed n-type organic field-effect transistors (OFETs) based on the fullerene derivative {6}-1-(3-(2- thienylethoxycarbonyl)-propyl)-{5}-l-phenyl-[5,6]-C61 (TEPP) and phenyl-C61-butyric acid methyl ester (PCBM) in a multiring source/drain structure are reported. Devices with TEPP show high electron mobility up to 7.8 x 10^-2 cm²/Vs in the saturation regime for bottom-contact OFETs with Au S/D electrodes with a solution-processed fullerene derivative. The ON/OFF ratios reported in this letter, which are in the range of 10⁵ -10⁶, are among the highest values reported for such devices. This mobility is always higher compared to PCBM devices prepared in identical conditions. The mobility of TEPP and PCBM increased with increasing temperatures in the range of 100-300 K with activation energy of 78 and 113 meV, respectively, which suggests that the thermally activated hopping of electrons is dominant in TEPP.     

On Critical Stability of Three Quantum Charges Interacting Through Delta Potentials

We consider three one-dimensional quantum, charged and spinless particles interacting through delta potentials. We derive sufficient conditions which guarantee the existence of at least one bound state.