Ultraprecise 3D Printed Graphene Aerogel Microlattices on Tape for Micro Sensors and E-Skin

3D printed graphene aerogels hold promise for flexible sensing fields due to their flexibility, low density, conductivity, and piezo-resistivity. However, low printing accuracy/fidelity and stochastic porous networks have hindered both sensing performance and device miniaturization. Here, printable graphene oxide (GO) inks are formulated through modulating oxygen functional groups, which allows printing of self-standing 3D graphene oxide aerogel microlattice (GOAL) with an ultra-high printing resolution of 70 µm. The reduced GOAL (RGOAL) is then stuck onto the adhesive tape as a facile and large-scale strategy to adapt their functionalities into target applications. Benefiting from the printing resolution of 70 µm, RGOAL tape shows better performance and data readability when used as micro sensors and robot e-skin. By adjusting the molecular structure of GO, the research realizes regulation of rheological properties of GO hydrogel and the 3D printing of lightweight and ultra-precision RGOAL, improves the sensing accuracy of graphene aerogel electronic devices and realizes the device miniaturization, expanding the application of graphene aerogel devices to a broader field such as micro robots, which is beyond the reach of previous reports.     

Musical variations from a chaotic mapping

A chaotic mapping provides a technique for generating musical variations of an original work. This technique, based on the sensitivity of chaotic trajectories to initial conditions, produces changes in the pitch sequence of a piece. A sequence of musical pitches {p(i)}, i.e., any piece ranging from Bach (or earlier) to contemporary music, is paired with the x-components {x(i)} of a Lorenz chaotic trajectory. Each p(i) is marked on the x axis at the point designated by its x(i). In this way, the x axis becomes a pitch axis configured according to the notes of the original composition. Then, a second chaotic trajectory, whose initial condition differs from the first, is launched. Its x-components trigger pitches on the pitch axis (via the mapping) that vary in sequence from the original work, thus creating a variation. There are virtually an unlimited number of variations possible, many appealing to expert and nonexpert alike. (c) 1996 American Institute of Physics.     

Polymeric flocculants processing by accelerated electron beams and microwave heating

Results obtained by accelerated electron beam, microwave and simultaneous microwave and electron beam application in the chemistry of acrylamide and acrylic acid copolymers (polymeric flocculants used for wastewater treatment) are presented. Comparative results concerning the molecular weight and Huggins’ constant for the acrylamide and acrylic acid copolymers obtained by classical heating, microwave heating, electron beam irradiation and simultaneous microwave and electron beam treatment are reported. Microwave heating produces high water solubility of the polymeric flocculants but median molecular weight values. Electron beam irradiation gives high molecular weight values but associated with a cross-linked structure (poor water solubility) while microwave energy addition to electron beam energy gives simultaneously high molecular weight values and high water solubility.     

Determination of trace metals in estuarine sediments by graphite-furnace atomic absorption spectrometry

A simple and rapid acid digestion method for the decomposition of estuarine sediments is described. Quantitative recovery of Cd, Pb, Cu, Ni, Co, Be and Co is demonstrated. Sensitive, precise and accurate determination of these trace metals by graphite-furnace atomic absorption spectrometry in combination with the L'vov Platform provides an interference-free technique that permits calibration with simple aqueous solutions of metal standards. The accuracy of the method has been confirmed by analysis of two marine sediment reference materials, MESS-1 and BCSS-1.     

Marine biological reference materials for methylmercury: analytical methodologies used in certification

Summary The methylmercury concentrations in three existing marine biological certified reference materials — TORT-1, DORM-1 and DOLT-1 — are determined by gas chromatography with electron capture detection, cold vapour atomic absorption spectrometry and inductively coupled plasma mass spectrometry after selective isolation of methylmercury. Two such procedures were used. These and the three analytical techniques are evaluated and compared. The certified methylmercury concentrations are: TORT-1, 0.128 ± 0.014; DORM-1, 0.731±0.060; and DOLT-1, 0.080 ± 0.011 g Hg/g dry weight.

---

Meeresbioligische Referenzmaterialien für Methylquecksilber: Analytische Methoden der Zertifizierung

     

Using capillary electrophoresis for the determination of organic acids in Port wine

The simultaneous separation and determination of organic acids in several samples of white and red Port wines was performed by capillary zone electrophoresis using indirect UV detection with 2,6-pyridinedicarboxylic acid as a background electrolyte buffer. Operational parameters like migration time, temperature, voltage and capillary length were optimized. Sixteen samples of red wine and four samples of white wine were used to analyze for tartaric, malic, lactic, succinic and acetic acids using glyoxylic acid as the internal standard. The method is rapid, sensitive and quantitative, and time-consuming sample preparation, such as solid-phase extraction or liquid-liquid extraction procedure, is not required.     

Crosslinking of ethylene-propylene (-diene) terpolymer elastomer initiated by an excimer laser

Excimer laser-induced crosslinking of ethylene-propylene-diene elastomer using a trace amount of photoinitiator, 1-hydroxy cyclohexyl phenyl ketone, was evaluated. Gel content measurements on irradiated samples showed that crosslinking was a natural consequence in all, which had undergone exposure to laser radiation. Degree of crosslinking was found to be linear with the laser exposure energy and was found to reach a saturation value of approximately 80% at about 100 J. However, for thicker samples the dependence of gel content i.e. crosslinking was found to be exponential over the range of laser exposure energy in excess of 200 J. As is expected, the tensile strength increased significantly with the increase of crosslinking. The band at 808 cm⁻¹ in the infrared spectra was attributed to the 5-ethylidene-2-norbornene (ENB) content in the polymer. The ENB has a double bond which is considered to be consumed with a high radiochemical yield and thereby contributes to the increase in rate of the formation of intermolecular bridge density.     

Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).