Lipase production by solid-state fermentation

The production of lipase by Penicillium simplicissimum in solid-state fermentation was studied using babassu cake as the basal medium. Tray-type and packed-bed bioreactors were employed. In the former, the influence of temperature; content of the medium, and medium supplementation with olive oil, sugarcane molasses, corn steep liquor, and yeast hydrolysate was studied. For all combinations of supplements, a temperature of 30°C, a moisture content of 70%, and a concentration of carbon source of 6.25% (m/m, dry basis) provided optimum conditions for lipase production. When used as single supplements olive oil and molasses also were able to provide high lipase activities (20 U/g). Using packed-bed bioreactors and molasses-supplemented medium, optimum conditions for enzyme production were air superficial velocities above 55 cm/min and temperatures below 28°C. The lower temperature optimum found for these reactors is probably related to radial heat gradient formation inside the packed bed. Maximum lipase activities obtained in these bioreactors (26.4 U/g) were 30% higher than in tray-type reactors.     

Electrochemical Assay to Quantify the Hydroxyl Radical Scavenging Activity of Medicinal Plant Extracts

A new electrochemical assay has been developed which is based on quantifying the attack of OH^. radicals on a self‐assembled thiol monolayer on electrodes in the presence and absence of antioxidants. The OH^. radicals were produced in Fenton solutions. The radical scavengers diminish the concentration of the OH^. radicals in the Fenton solution, and the extent of thiol layer destruction is monitored with the help of a redox probe in solution, the signal of which is only generated at SAM‐free electrode surface. The results of the electrochemical assay were compared with those of the standard DPPH^. assay. In case of each plant extract, an excellent linear correlation was observed between the radical scavenging activity and the concentration of plant extracts; however, the scavenging properties of different plants strongly differ in the electrochemical and the DPPH^. assay. Since the proposed new method probes the reactivity of radical scavengers towards OH^., one of the most important reactive oxygen radicals in tissues, it is supposed to provide much more relevant information than the DPPH^. or other assays.     

Determination of synthetic pharmaceuticals in phytotherapeutics by capillary zone electrophoresis with contactless conductivity detection (CZE-CD)

In this work, a method for simultaneous determination of amfepramone, fenproporex, sibutramine and fluoxetine was developed by capillary zone electrophoresis with capacitively coupled contactless conductivity detection (C⁴D) using a homemade capillary electrophoretic system. The optimized conditions for the separation of the pharmaceuticals by CZE were as follows: 50 mmol L^− 1 phosphate buffer (pH 5.0) in 50/50 (v/v) mixture of water/acetonitrile as the working electrolyte, 15 kV separation voltage, 25 °C separation temperature, hydrodynamic injection by gravity using 20 cm injection height and 60 s injection time. The detection by C⁴D was carried out by using a homemade detector, which employs a sinusoidal wave generator operating at 600 kHz frequency and 2 V_pp wave amplitude. The optimized and validated CZE-C⁴D method was applied for the determination of the studied pharmaceuticals as adulterants in phytotherapeutic formulations commercialized in Brazil for slimming purposes.     

One-pot synthesis of β-amino acid derivatives via addition of bis(O-silyl) ketene acetals on iminium salts

We report here our findings on a new and highly efficient strategy for the synthesis of β-amino acids involving the addition of bis(O-silyl) ketene acetals on Mannich type iminium electrophiles.     

Spectroscopic and kinetic studies of perturbed trinuclear copper clusters: the role of protons in reductive cleavage of the O-O bond in the multicopper oxidase Fet3p

The multicopper oxidase Fet3p couples four 1e(-) oxidations of substrate to the 4e(-) reduction of O2 to H2O. Fet3p uses four Cu atoms to accomplish this reaction: the type 1, type 2, and coupled binuclear type 3 sites. The type 2 and type 3 sites together form a trinuclear Cu cluster (TNC) which is the site of O2 reduction. This study focuses on mutants of two residues, E487 and D94, which lie in the second coordination sphere of the TNC and defines the role that each plays in the structural integrity of the TNC, its reactivity with O2, and in the directional movement of protons during reductive cleavage of the O-O bond. The E487D, E487A, and D94E mutants have been studied in the holo and type 1 depleted (T1D) forms. Residue E487, located near the T3 center, is found to be responsible for donation of a proton during the reductive cleavage of the O-O bond in the peroxide intermediate and an inverse kinetic solvent isotope effect, which indicates that this proton is already transferred when the O-O bond is cleaved. Residue D94, near the T2 site, plays a key role in the reaction of the reduced TNC with O2 and drives electron transfer from the T2 Cu to cleave the O-O bond by deprotonating the T2 Cu water ligand. A mechanism is developed where these second sphere residues participate in the proton assisted reductive cleavage of the O-O bond at the TNC.     

Stereoselective synthesis of a MCHr1 antagonist

Melanin-concentrating hormone (MCH) is implicated in the feeding behavior in mammals affording a potential target to control overeating in people. Compound 1 (AMG 076) has been identified as a potent MCHr1 antagonist for the treatment of obesity. A synthesis suitable for the large-scale preparation of this lead candidate was developed to support preclinical studies. A Robinson annulation of benzylpiperidone and resolution of the desired enone from a mixture of the diastereomers afforded key intermediate 6 after a stereoselective hydrogenation. Subsequent Fischer indole synthesis with hydrazine 5 then provided the advanced intermediate, indole 2. Two complementary reductive amination strategies employing either aldehyde 3 or lactol 4 led to the synthesis of title compound 1.     

Immobilization of hexokinase onto chitosan decorated particles

Chitosan (CH) decorated polystyrene (PS) particles were synthesized within complexes of CH, a polycation under acid conditions, and tiny amounts of sodium dodecylsulfate (SDS). Particle characterization was performed by means of dynamic light scattering, zeta potential measurements, and transmission electron microscopy. All dispersions were stable in the ionic strength of 2.0 mol L-1 NaCl during 2 months. The outstanding colloidal stability was attributed to the presence of a hydrated CH layer around the particles. CH decorated PS particles were attached to atomic force microscopy cantilevers and probed against Si wafers in water and in NaCl 0.01 mol/L. The mean thickness of CH layer amounted to 35 +/- 11 and 16 +/- 6 nm, when the medium was water and NaCl 0.01 mol/L, respectively. Adsorption isotherm of hexokinase (HK) onto PS/CH particles studied by means of spectrophotometry showed three regions: an initial step; adsorption plateau and multilayer formation. Enzymatic activity of free HK and immobilized HK was monitored by means of spectrophotometry as a function of storing time and reuse. After 3 days, storing HK free in solution dramatically lost its catalytic properties. On the contrary, HK-covered PS/CH particles retained enzymatic activity over 1 month. Moreover, HK-covered PS/CH particles could be reused in the determination of glucose two times consecutively, without losing activity. These interesting findings were discussed in light of the role of water in enzyme conformation.     

Characterization of a putative Xylella fastidiosa diffusible signal factor by HRGC-EI-MS

Xylella fastidiosa (X.f.) is a plant pathogen with high levels of genomic similarity to Xanthomonas campestris pv. campestris (X.c.c.). It has been shown that X. fastidiosa synthesizes a putative diffusible signal factor (X.f.-DSF) that activates regulation of pathogenicity factor (rpf) genes in a X.c.c. reporter system, which might be involved in the regulation of pathogenesis associated genes as in X.c.c., as well as in quorum-sensing. The nature of the X.f.-DSF is not known, whereas the X.c.c.-DSF has been identified as cis-11-methyl-2-dodecenoic acid. In this work, the chemical nature of a putative X.f.-DSF molecule, able to restore endoglucanase activity in a X.c.c. rpfF mutant, was investigated as if it was a fatty acid derivative. Bioassays with X.c.c. reporter bacterium and X.f. culture extracts, based on endoglucanase restoration activity, were also carried out in order to confirm the DSFs molecules similarities. For this reason, a gas chromatography-mass spectrometry method was developed with standard fatty acids methyl esters mixtures. The retention time, as well as the fragmentation patterns, of each standard was used to identify the DSF molecule synthesized by X.f. in the culture medium. Typical ester fragmentation patterns (the derivatized analyte) were observed, such as: McLafferty rearrangement and migration of the Hdelta followed by 1,4-hydrogen shift and cleavage of the bond Cbeta-Cgamma, confirming the nature of this molecule. This confirmation was corroborated by the common peaks in both spectra. Besides, the observed retention time reinforces our conclusion since it corresponds to a methyl ester with 15 carbons. Since the X.f.-DSF molecule was tentatively identified as 12-methyl-tetradecanoic acid (by mass spectra library comparison), this standard compound was also analyzed, strongly suggesting that this is the identification of such a molecule. To our knowledge, this is the first time a DSF produced by X.f. has been characterized.