相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。     

用θ-2θ型衍射仪测定溶液结构的新方法

叙述了用θ－２θ型Ｘ射线衍射仪精确测定电解质溶液结构的新实验技术。设计制作了具有恒温功能的超厚液体样品池，并建立了样品池窗口强度的校正方法。优化了液体Ｘ射线衍射数据和结构参数精细化的计算机程序，获得了非常令人满意的实验结果。由θ－２θ型Ｘ射线衍射仪精确测定的径向分布函数与θ－θ型衍射仪自由散射比较，表明ＤＲＦ分辨率有所提高。     

聚酰亚胺/二氧化硅纳米尺度复合材料的研究

通过正硅酸乙酯（ＴＥＯＳ）在聚酰胺酸（ＰＡＡ）的Ｎ，Ｎ’ 二甲基乙酰胺（ＤＭＡｃ），溶液中进行溶胶 凝胶反应，制备出不同二氧化硅含量的聚酰亚胺／二氧化硅（ＰＩ／ＳｉＯ２）复合薄膜材料．二氧化硅含量低于１０ｗｔ％的样品是透明浅黄色薄膜；二氧化硅含量高于１０ｗｔ％的样品是不透明棕黄色薄膜．利用红外光谱、扫描电镜、热失重分析、动态力学分析、热膨胀系数测试和应力 应变测试等方法研究了此类材料的结构与性能．结果表明，ＰＩ／ＳｉＯ２纳米复合材料具有较聚酰亚胺更高的热稳定性和更高的模量；线膨胀系数显著降低；拉伸强度和断裂伸长随二氧化硅含量而变化，分别在１０ｗｔ％和３０ｗｔ％附近出现最大值     

衍生荧光法测定盐酸西布曲明

通过衍生反应，建立了用荧光光度法测定盐酸西布曲明的新方法。并对衍生体系、反应条件、产物稳定性等进行了研究。实验确定丙二酸和乙酸酐混合试剂与盐酸西布曲明在75℃的水浴中加热15min，所得产物发射强荧光，最大激发波长λcx=456nm，最大发射波长λem=496nm。在上述波长下，荧光强度与盐酸西布曲明的质量浓度在0．11～9．5μg／mL范围内呈良好的线性关系，检出限为13．4ng／mL，标准加入回收率在95．4％～104．2％。用于曲美胶囊中盐酸西布曲明的测定。     

Electrospinning of nylon-6,66,1010 terpolymer

Ultrafine nylon fibers were prepared by electrospinning of nylon-6,66,1010 terpolymer solution in 2,2,2-trifluoroethanol (TFE). The morphology, crystallinity and mechanical properties of the electrospun nylon-6,66,1010 fibers were investigated by scanning electron microscope (SEM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and tensile test. The effects of electrospun process parameters such as solution concentration, voltage and tip-to-collector distance on the morphology and the average size of the electrospun fibers were also studied. The results show that the spinnable concentration of nylon-6,66,1010/TFE solution is in the range of 6-14 wt%, and higher solution concentration favors the formation of uniform fibers without beads. The diameters of the electrospun fibers increase with increasing the solution concentration and decrease slightly with increasing the voltage and needle tip-to-collector distance. But no obvious morphology changes were found with the increase of the voltage and collection distance. DSC and WAXD results suggest that the electrospun nylon-6,66,1010 membranes have lower crystallinity than those of the corresponding casting films. The electrospun nylon-6,66,1010 membrane obtained from the 14 wt% concentration exhibits the largest tensile strength and elongation at break.     

铬天青S共振光散射法测定脱氧核糖核酸

介绍在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下阴离子染料铬天青S(CAS)共振光散射(RLS)法测定脱氧核糖核酸(DNA)的方法。在pH=5．27的六次甲基四铵一盐酸缓冲溶液中，研究了CAS—CT-MAB—yDNA体系的RLS光谱特征、影响因素和最佳反应条件。在最佳条件下，体系的RLS强度增加值△I与yDNA的浓度在50～800μg／L和1000～2000μg／L呈线性关系，其线性回归方程分别为△I=0．48c 2．56和△I=0．14c 17．86，相关系数分别为0．9997和0．9991，检出限为4．3ng／mL。该方法简便、快速，应用于合成样品中yDNA的测定，测定结果的相对标准偏差为2．93％～4．71％，回收率为97．8％～105．2％。     

5C + 1S] annulation: a facile and efficient synthetic route toward functionalized 2,3-dihydrothiopyran-4-ones

[reaction: see text] A facile and efficient synthetic route toward highly substituted 2,3-dihydrothiopyran-4-ones 2 has been developed via a formal [5C + 1S] annulation of readily available alpha-alkenoyl ketene-(S,S)-acetals 1 with sodium sulfide nonahydrated salt (Na2S x 9H2O) and utilized in the synthesis of 2-(4-chlorophenyl)-6-(morpholin-4-yl)-4H-thiopyran-4-one 5l, an inhibitor of DNA-dependent protein kinase (DNA-PK).     

负载型镍金属催化剂上甲烷与二氧化碳重整制合成气

报道了负载型Ｎｉ金属催化剂的表面特征和对ＣＨ４与ＣＯ２重整制合成气的催化性能，反应结果和ＴＰＲ，ＸＲＣ结果表明：Ｎｉ担载量为９．０％的催化剂具有最佳的反应性能，Ｎｉ组分以高散表面化合物形式存在，助剂对催化剂活性的影响随载体和添加方式的不同较大差异，其中少量ＭｇＯ，Ｌａ２Ｏ３对改善催化剂的稳定性和抗积碳能力有十分显著的效果，载体和制备方法对催化剂性能具有明显影响，其中浸渍法制备的Ｎｉ／ＭｇＯ催化剂不     

A quantitative method for dual‐pass electrostatic force microscopy phase measurements

Electrostatic force microscopy (EFM) has become a powerful tool for investigating charges on surfaces. The use of phase measurement in EFM is a direct and fast way to detect electrostatic force gradients, but only qualitatively. With the dual‐pass scheme, the phase signal at lifted height is often assumed to exclude any influences from the topography, but it does not. We report the collection of both topography and phase data by EFM on charged, micron‐sized metal wires. In order to quantify the electrostatic force, a cone model and finite element analysis are provided to integrate the force gradient from the phase signal. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of crystallization conditions on the crystalline transformation behavior of nylon 10 14

Three kinds of nylon 10 14 crystals with different perfections were prepared under various crystallization conditions. The Brill transition behavior of these nylon 10 14 crystals was investigated by variable-temperature X-ray diffraction. It was found that the crystallization conditions influence the Brill transition temperature greatly. The Brill transition temperature of the lamellar crystals grown from dilute solution is so high that no Brill transition temperature can be observed before melting. However, for crystals postannealed at 125 °C, the Brill transition temperature is as low as 130 °C. The results show that the Brill transition behavior of nylons is strongly dependent on the crystallization conditions, for example, the perfections of the crystals.