Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Simplified Labeling Approach for Synthesizing 3′-Deoxy-3′-[18F]fluorothymidine ([18F]FLT)

[¹⁸F]FLT (3-deoxy-3-[¹⁸F]fluorothymidine) turned out to be a tracer particularly suitable for PET imaging of tumor proliferation because of lacking degradation in vivo. To facilitate clinical studies with [¹⁸F]FLT, we investigated two new easily accessible precursors, 2,3-anhydrothymidine (AThy) and 5-O-(4,4-dimethoxytriphenylmethyl)-2,3-anhydrothymidine (DMTThy), using a common approach for introducing the label with nucleophilic [¹⁸F]fluoride. Radiochemical yields were determined in dependence on substrate concentration, reaction time and temperature. In the case of AThy (10 mg), best FLT yields were 5.3%±1.2 (130 °C, 30 min). Labeling of DMTThy (10 mg) gave 14.3%±3.3 at 160 °C within 10 minutes. Starting with an aqueous solution of 20 GBq [¹⁸F]fluoride the new method allows to produce 1.3 GBq [¹⁸F]FLT within 90 minutes ready for intravenous injection. The new labeling procedures allow [¹⁸F]FLT synthesis without lengthy preparation of the precursor and with high reproducibility mandatory for clinical application.     

Luminescent heteronuclear Au(I)5Ag(I)8 complexes of [1,2,3-C6(C6H4R-4)3]3- (R = H, CH3, But) by cyclotrimerization of arylacetylides

Unusual AuI-AgI heterometallic complexes [Au5Ag8(mu-dppm)4{1,2,3-C6(C6H4R-4)3}(CCC6H4R-4)7]3+ (R = H 1, CH3 2, But 3) were isolated by reactions of polymeric silver arylacetylides (AgCCC6H4R-4)n with binuclear gold component [Au2(mu-dppm)2(MeCN)2]2+ (dppm = bis(diphenylphosphino)methane), in which cyclotrimerization of arylacetylide -CCC6H4R-4 affords trianion {1,2,3-C6(C6H4R-4)3}3- with an unprecedented mu5-bonding mode. Compounds 1(SbF6)3-3(SbF6)3 exhibit intense photoluminescence derived from an MLCT (Au5Ag8 --> CCC6H4R-4) transition, mixed with a metal cluster-centered excited states.     

Synthesis of fluorinated imines and carbodiimides from azides via aza-Wittig reaction

The Staudinger reaction of fluoroalkylazides were studied. A series of N-fluoroalkylimines were synthesized via aza-Wittig reaction of N-fluoroalkyliminophosphoranes. The N,N′-difluoroalkylated carbodiimide was also synthesized via the reaction of N-fluoroalkyliminophosphoranes with carbon dioxide or carbon disulfide.     

Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

Quantum-mechanical effects and gate leakage current of nanoscale n-type FinFETs: A 2d simulation study

This paper simulates a kind of new sub-50 nm n-type double gate MOS nanotransistors by solving coupled Poisson-Schrödinger equations in a self-consistent manner with a finite element method, and presents a systematic simulation-based study on quantum-mechanical effects, gate leakage current of FinFETs. The simulation results indicate that the deviation from the classical model becomes more important as the gate oxide, gate length and Fin channel width becomes thinner and the Fin channel doping increases. Gate tunneling current density reduces with the body thickness decreasing. Excessive scaling increases the gate current below Fin thickness of 5 nm. The gate current can be dramatically reduced beyond 10¹⁷ cm⁻³ with the Fin body doping increasing. In order to understand the influence of electron confinement, quantum mechanical simulation results are also compared with the results from the classical approach. Our simulation results indicate that quantum mechanical simulation is essential for the realistic optimization of the FinFET structure.     

基于0.1-μm GaAs pHEMT工艺的最小噪声系数3.9 dB的66~112.5 GHz低噪声放大器

本文基于0.1-μm砷化镓赝配高电子迁移率晶体管（GaAs pHEMT）工艺,研制了一款覆盖整个W波段的宽带低噪声放大器。提出了一种由双并联电容组成的旁路电路,能够提供宽带射频接地,减小了级间串扰,利于实现宽带匹配。采用双谐振匹配网络实现了宽带的输入匹配和最佳噪声匹配。实测结果显示,最大增益在108 GHz处达到20.4 dB,在66~112.5 GHz范围内,小信号增益为16.9~20.4 dB。在90 GHz处,实测噪声系数为3.9 dB。实测的输入1-dB压缩点在整个W波段内约为-12 dBm。     

一种6信道声光调制器

介绍了一种6信道声光调制器。通过在换能器上制备电极阵列,设计独立的阻抗匹配电路和电输入端口,将6个声光互作用单元集成在一起,实现了对6束激光的并行、独立调制。经测试,该6信道声光调制器工作波长为355 nm,工作频率为220 MHz,单信道衍射效率＞75%,全局串扰＜0.5%。     

水体透射光谱结合主成分分析(PCA )改进化学需氧量(COD)含量估算研究

化学需氧量（Chemical Oxygen Demand,COD）是水体有机污染的一项重要指标,化学需氧量越高,表示水污染程度越严重。 为了解决传统的COD测量方法耗时较长,不利于快速、实时地获取水体中COD的信息等问题。本文提出了基于透射光谱测量结合主成分分析(Principal Component Analysis, PCA)改进水体COD含量估算模型。具体的,采集100组COD水体光谱信息,分别使用3种不同的高光谱数据预处理方法对光谱数据进行预处理,分析不同预处理方法对模型精度的影响,并基于不同的预处理方法分别建立高斯过程回归模型(Gaussian Process Regression, GPR)和BP神经网络模型,分析不同预处理方法对模型精度的影响;并对各模型结合PCA数据降维方法进行模型的改进,通过比较模型的精度选择最优模型进行水体COD含量的检测。结果显示,相比于原始光谱数据建立的GPR模型和BP神经网络模型,数据预处理后的模型精度明显提升;且结合PCA对预处理后的数据进一步降维处理后,模型精度得到了进一步的提升。其中,基于标准正态变量变换特征结合PCA改进BP神经网络模型基于PCA改进的BP神经网络模型R^2高达0.9940,均方根误差RMSE为0.022540。证明了基于PCA改进的BP神经网络数据降维方法对预处理后的光谱数据进行降维处理,有利于去除光谱中的冗余信息,提取特征信息,可以实现高光谱检测方法可以实现COD含量估算模型的优化,从而为传统COD测量方法存在的问题提出了一种新的解决思路。     

Visible Light-Driven Alkyne-Grafted Ethylene-Bridged Azobenzene Chromophores for Photothermal Utilization

Molecular photoswitches are considered to be important candidates in the field of solar energy storage due to their sensitive and reversible bidirectional optical response. Nevertheless, it is still a daunting challenge to design a molecular photoswitch to improve the low solar spectrum utilization and quantum yields while achieving charging and discharging of heat without solvent assistance. Herein, a series of visible-light-driven ethylene-bridged azobenzene (b-Azo) chromophores with different alkyne substituents which can undergo isomerization reactions promoted in both directions by visible light are reported. Their visible light responsiveness improves their solar spectrum utilization while also having high quantum yields. In addition, as the compounds are liquids, there is no need to dissolve the compounds in order to exploit this switching. The photoisomerization of b-Azo can be adjusted by alkyne-related substituents, and hexyne-substituted b-Azo is able to store and release photothermal energy with a high density of 106.1 J·g⁻¹, and can achieve a temperature increase of 1.8 °C at a low temperature of −1 °C.