一类暂留稳定过程的极限定理

本文研究了Ａ型暂留稳定过程在无穷远处的收敛速度，给出了一个重对数律．同时我们也得出了这类过程在起始点附近的一些性质．这些性质推广了［１］中的结果     

Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

Performance model of interactive video-on-demand systems

An interactive video-on-demand (VoD) system allows users to access video services, such as movies, electronic encyclopedia, interactive games, and educational videos from video servers on a broadband network. This paper develops a performance evaluation tool for the system design. In particular, a user activity model is developed to describe the usage of system resources, i.e., network bandwidth and video server usage, by a user as it interacts with the service. In addition, we allow batching of user requests, and the effect of such batching is captured in a batching model. Our proposed queueing model integrates both the user activity and the batching model. This model can be used to determine the requirements of network bandwidth and video server and, hence, the trade-off in communication and storage costs for different system resource configurations     

超短脉冲在远场的时空特性

将在时间和空间上为高斯型的超短脉冲分解成不同时间频率的高斯光束．详细地分析了其远场由于时空耦合引起的光谱频移、波前弯曲等复杂的时空特征。     

A BiCMOS dynamic carry lookahead adder circuit for VLSIimplementation of high-speed arithmetic unit

A BiCMOS dynamic carry lookahead circuit that is free from race problems is presented. A 16 b full-adder test circuit, which has been designed based on a 2 μm BiCMOS technology, shows a more than five times improvement in speed as compared to the CMOS Manchester carry lookahead (MCLA) circuit. The speed advantage of the BiCMOS dynamic carry lookahead circuit is even greater in a 32- or 64-b adder     

白三叶草花蜜腺的发育解剖学研究

白三叶草花蜜腺突起环状，位于花丝基部并延续至花托上，属于环状花托／雄蕊蜜腺，蜜腺由分泌表皮和产蜜组织组成．在花的发育过程中，蜜腺由本身的原始细胞分裂，分化而来．分泌表皮具角质层，其上分布有变态气孔器，蜜汁经产蜜组织合成后，经变态气孔器泌出．     

神经网络法计算镉（Ⅱ）,羟基及碳酸根三元体系的形态分布

采用前馈线笥网络ＢＰ算法，计算了Ｃｄ６２＋－ＯＨ＾－ＣＯ＾２－３三元体系的累积稳定常数。用Ｈｏｐｆｉｅｌｄ反馈网络研究了体系中络合物的形态分布。溶液中溶解的ＣＯ２对ｌｇβ１的计算结果有重要影响，对ｌｇβ２，ｌｇβ３，ｌｇβ４的结果影响不大。     

Barium ferrite particulates prepared by a salt-melt method

Barium ferrite particulates have been prepared by coprecipitation and calcination in a flux of NaCl-KCl. It was found that a flux containing more than 30 wt% KCl tends to seriously deteriorate the magnetic properties of resultant perticulates. The flux with 10 wt% KCl or less showed promising results. A Ba(CoZr)_0.75Fe_10.5O₁₉ particulate showed the best properties, i.e., a saturation magnetization of 68.5, a squareness ratio of 0.49, and a coercivity of 1280 Oe, when calcined in NaCl at 900°C for 4 h.     

中国的三种非同步轨道卫星移动通信系统星座方案

本文介绍基于我国的三种非同步轨道卫星移动通信系统星座方案：低、中轨系统各有２４和１８颗星，轨道高度分别为１３２６和８０３５ｋｍ，两系统各以５°和３０°的仰角对我国的覆盖率为９９．７８％和９９．９６％；椭圆轨道系统１２颗星，近、远地点分别为４２７和２９０６ｋｍ，以７°和１５°仰角对我国北纬２０°以上地区覆盖率分别为９７．９０％和８９．６１％，若增加４颗中轨卫星，以１５°仰角对我国的覆盖率为９９．９９％。     

射流式单重态氧发生器研究

单重态氧O2 (a1Δg)是迄今唯一能用纯化学反应高效产生的具有长寿命的亚稳激发态分子 .为了考察提出的用两个O2 (1Δ)能量汇集反应生成氧第二单重激发态O2 (b1Σ+ g)以实现近可见短波长化学激光方案的现实性 ,设计和实验了一个氯流量为 3～ 10mmol/s的射流式单重态氧发生器 (JSOG) .考察了三种具有不同孔径和孔数目的喷头、氯气流量和脱水冷阱温度等对JSOG出口的O2 (1Δ)浓度、O2 (1Δ)分压、氯利用率及水蒸气含量的影响 .发现用聚氯乙烯管作冷阱时 ,最佳冷阱介质温度为 - 140～ - 15 0℃ ,对此提出了O2 (1Δ)表面脱活与脱水互相竞争的解释 .在最佳条件下 ,可将O2 (1Δ)气中水分压降低至 4Pa ,这一结果是首次报导