用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

直接序列扩展频谱中伪码优选研究

本文从最优化理论和工程实际出发，全面分析和完善了直接序列扩展频谱中伪码的数学模型，在此基础上，建立了一种较准确的伪码优选数学模型，并探讨了合适的搜索算法。     

一种智能化的键盘练习器

本文介绍了一个利用单片机研制的键盘操作练习器。它能完成健盘输入练习和输入水平测试二项功能。     

大规模集成电路浮栅ROM器件总剂量辐射效应

提出了一种大规模集成电路总剂量效应测试方法:在监测器件和电路功能参数的同时,监测器件功耗电流的变化情况,分析数据错误和器件功耗电流与辐射总剂量的关系.根据该方法利用60Co γ射线进行了浮栅ROM集成电路(AT29C256)总剂量辐照实验,研究了功耗电流和出错数量在不同γ射线剂量率辐照下的总剂量效应,以及参数失效与功能失效时间随辐射剂量率的变化关系,并利用外推实验技术预估了电路在空间低剂量率环境下的失效时间.     

构件重用技术在雷达软件中的应用

随着雷达软件系统技术的发展 ,软件规模、复杂度也越来越大 ,对开发、调试、功能升级等带来难度。文中提出了利用构件技术开发雷达软件系统的思想 ,并给出利用构件技术研制雷达软件系统的基本思路     

~n中有界域上全纯函数的第Ⅰ型 C-F公式

本文得到Ｃｎ中有界域上全纯函数的一种其积分密度函数含有全纯函数导数的 Ｃａｕｃｈｙ－Ｆａｎｔａｐｐｉ　　公式，称之为第Ⅰ型 Ｃ－Ｆ 公式，利用这个公式，通过适当选择其中的向量函数，可以得到许多区域上全纯函数相应的第Ⅰ型积分表示式．     

Comments on “Multiphase systolic algorithms for spectraldecomposition” [and reply]

Comments that the paper by Liu and Yao (see ibid., vol.40, no.1, p.190, 1992) presented an efficient algorithm for spectral decomposition, but the parallel algorithm and architecture for the Hessenberg reduction has a problem. The matrix obtained from the unitary similarity transformation is not necessarily a Hessenberg matrix. The authors reply that the Hessenberg reduction described is not in the Hessenberg form. Only the first column is in its proper form. There are many ways to overcome such a problem. One simple way is to use the multiphase rectangular systolic array     

On the optimum design of unitary cyclic group space-time codes

In this letter, based on the exact pairwise-error probability, we derive the union bound on the symbol-error probability (SEP) of the differential unitary space-time (DUST) modulation employing group codes. Instead of using the rank-and-determinant or Euclidean distance criteria, we optimize the cyclic group codes such that the union bound on the SEP is minimized for a predetermined scenario, taking into account the number of transmit and receive antennas and the operating signal-to-noise ratio (SNR). Our simulation results show that for a wide range of SNRs, the codes with the minimum union bound for a particular SNR outperform the codes designed based on rank-and-determinant or Euclidean distance criteria.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

En/Decoder for Spectral Phase-Coded OCDMA System Based on Amplitude Sampled FBG

A novel en/decoder for spectral phase-coded optical code-division multiple-access system based on amplitude sampled fiber Bragg grating (FBG) is proposed. Both equivalent chirp and equivalent phase shift are achieved by amplitude sampling. Compared with previous en/decoder based on step chirped FBG, it is easier to fabricate. The performance of the proposed en/decoder is verified by both numerical simulation and experimental demonstration.