Estrogen-derived steroidal metal complexes: agents for cellular delivery of metal centers to estrogen receptor-positive cells

Targeted cellular delivery of drugs to specific tissues is an important goal in biomedical chemistry. Achieving this requires harnessing and applying molecular-level recognition events prevalent in (or specific to) the desired tissue type. Tissues rich in estrogen receptors (ERs), which include many types of breast cancer, accumulate molecules that have high binding affinities for these receptors. Therefore, molecules that (i) bind to the ER, (ii) have favorable cellular transport properties, and (iii) contain a second functionality (such as a center that may be used for diagnostic imaging or medical therapy) are exciting synthetic targets in the field of drug delivery. To this end, we have prepared a range of metallo-estrogens based on 17alpha-ethynylestradiol and examined their binding to the ER both as isolated receptor and in whole cell assays (ER positive MCF-7 cells). Estrogens functionalized with metal binding units are prepared by palladium-catalyzed cross-coupling reactions and a wide range of metal centers introduced readily. All the compounds prepared and tested exhibit effective binding to the estrogen receptor and are delivered across the cell membrane into MCF-7 cells. In the whole cell assays, despite their monocationic nature, the palladium and platinum complexes prepared exhibit similar (and even enhanced) receptor binding affinities compared to their corresponding neutral free ligands. It is unprecedented for a higher ER binding affinity to be observed for a cationic complex than for its metal-free ligand.     

Cell separations using targeted monoclonal antibodies against overproduced surface proteins

Applied Biochemistry and Biotechnology - The capacity of polystyrene microspheres with immobilized antibodies against type 1 pili ofE. coli was measured. Using pure IgG-type monoclonal antibodies...     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS. XVIII. INDOMETHACIN

Abstract— The photochemistry, photophysics, and photosensitization (Type I and II) of indomethacin (IN) (N-[p-chlorobenzoyl]-5-methoxy-2-methylindole-3-acetic acid) has been studied in a variety of solvents using NMR, high performance liquid chromatography-mass spectroscopy, transient spectroscopy, electron paramagnetic resonance in conjunction with the spin trapping technique, and the direct detection of singlet molecular oxygen (^l O₂) luminescence. Photodecomposition of IN (λ_ex > 330 nm) in degassed or air-saturated benzene proceeds rapidly to yield a major (2; N-[p-chlorobenzoyl]-5-methoxy-2-methyl-3-methylene-indoline) and a minor (3; N-[p-chlorobenzoyl]-5-methoxy-2, 3-dimethyl-indole) decarboxylated product and a minor indoline (5; 1-en-5-methoxy-2-methyl-3-methylene-in-doline), which is formed by loss of the p-chlorobenzoyl moiety. In air-saturated solvents two minor oxidized products 4 (N-[p-chlorobenzoyl]-5-methoxy-2-methylindol-3-aldehyde) and 6 (5-methoxy-2-methyl-indole-3-aldehyde) are also formed. When photolysis was carried out in ¹⁸O₂-saturated benzene, the oxidized products 4 and 6 contained ¹⁸O, indicating that oxidation was mediated by dissolved oxygen in the solvent. In more polar solvents such as acetonitrile or ethanol, photodecomposition is extremely slow and inefficient. Phosphorescence of IN at 77 K shows strong solvent dependence and its emission is greatly reduced as polarity of solvent is increased. Flash excitation of IN in degassed ethanol or acetonitrile produces no transients. A weak transient is observed at 375 nm in degassed benzene, which is not quenched by oxygen. Irradiation of IN (λ_ex > 325 nm) in N₂-gassed C₆H₆ in the presence of 5, 5-dimethyl-1-pyrroline-N-oxide (DMPO) results in the trapping of two carbon-centered radicals by DMPO. One adduct was identified as DMPO/^.COC₆H₄-p-CI, while the other was probably derived from a radical formed during IN decarboxylation. In air-saturated benzene, (hydro) peroxyl and alkoxyl radical adducts of DMPO are observed. A very weak luminescence signal from ¹O₂ at 1268 nm is observed initially upon irradiation (λ_ex= 325 nm) of IN in air-saturated benzene or chloroform. The intensity of this ¹O₂ signal increases as irradiation is continued suggesting that the enhancement in ¹O₂ yield is due to photoproduct(s). Accordingly, when 2 and 3 were tested directly, 2 was found to be a much better sensitizer of ¹O₂ than IN. In air-saturated ethanol or acetonitrile no IN ¹O₂ luminescence is detected even on continuous irradiation. The inability of IN to cause phototoxicity may be related to its photo stability in polar solvents, coupled with the low yield of active oxygen species (¹O₂, O₂^?_-) upon UV irradiation.     

Asymmetric synthesis of syn-(2R,3S)-and anti-(2S,3S)-ethyl diamino-3-phenylpropanoates from N-(benzylidene)-p-toluenesulfinamide and glycine enolates

Addition of differentially N-protected glycine enolates to enantiopure sulfinimines affords syn- and anti-alpha,beta-diamino esters with high diastereoselectivities and good yields.     

DNA-templated three-branched nanostructures for nanoelectronic devices

Three-branched DNA molecules have been designed and assembled from oligonucleotide components. These nucleic acid constructs contain double- and single-stranded regions that control the hybridization behavior of the assembly. Specific localization of a single streptavidin molecule at the center of the DNA complex has been investigated as a model system for the directed placement of nanostructures. Highly selective silver and copper metallization of the DNA template has also been characterized. Specific hybridization of these DNA complexes to oligonucleotide-coupled nanostructures followed by metallization should provide a bottom-up self-assembly route for the fabrication and characterization of discrete three-terminal nanodevices.     

Design and characterization of libraries of molecular fragments for use in NMR screening against protein targets

We have designed four generations of a low molecular weight fragment library for use in NMR-based screening against protein targets. The library initially contained 723 fragments which were selected manually from the Available Chemicals Directory. A series of in silico filters and property calculations were developed to automate the selection process, allowing a larger database of 1.79 M available compounds to be searched for a further 357 compounds that were added to the library. A kinase binding pharmacophore was then derived to select 174 kinase-focused fragments. Finally, an additional 61 fragments were selected to increase the number of different pharmacophores represented within the library. All of the fragments added to the library passed quality checks to ensure they were suitable for the screening protocol, with appropriate solubility, purity, chemical stability, and unambiguous NMR spectrum. The successive generations of libraries have been characterized through analysis of structural properties (molecular weight, lipophilicity, polar surface area, number of rotatable bonds, and hydrogen-bonding potential) and by analyzing their pharmacophoric complexity. These calculations have been used to compare the fragment libraries with a drug-like reference set of compounds and a set of molecules that bind to protein active sites. In addition, an analysis of the overall results of screening the library against the ATP binding site of two protein targets (HSP90 and CDK2) reveals different patterns of fragment binding, demonstrating that the approach can find selective compounds that discriminate between related binding sites.     

Conversion of rhenium alkylidyne complexes that contain unsupported metal-metal double bonds into relatives that contain μ-alkylidyne ligands

Photolysis of compounds of the type [Re(CCMe₂R)(OR′)₂] (R = Me or Ph; OR′ = O′Bu, OCMe₂(CF₃), or OCMe(CF₃)₂) in benzene with a medium pressure mercury lamp yields compounds of the type [Re(OR′)₂]₂(μ-CCMe₂R)₂ in an intramolecular and irreversible manner. [Re(CCMe₂R)(OR′)₂]₂ and [Re(OR′)₂]₂(μ-CCMe₂R)₂ (OR′ = O′Bu or OCMe₂(CF₃)₂) both react with excess carbon monoxide in several solvents to afford the dimers [Re(OR′)₂(CO)]₂(μ-CCMe₂R)₂ quantitatively. An X-ray study of [Re(O^tBu)₂(CO)]₂ (μ-C^tBu)₂ shows it to consist of two distorted trigonal bipyramids connected by two symmetrically bridging neopentylidyne ligands. The unbridged dimers of general formula [Re(CCMe₂R)(OR′)₂]₂ do not react readily with simple substrates such as phosphines, olefins, or acetylenes, although [Re(CCMe₂R)(O^tBu)₂]₂ can be oxidized by iodine to yield Re(CCMe₂R)(O^tBu)₂I₂ in good yield. In contrast, {Re[OCMe(CF₃)₂]₂}₂(μ-C^tBu)₂ reacts with one equivalent of phenylacetylene to give a species in which one of the two bridging alkylidyne ligands is retained.     

Asymmetric synthesis of functionalized trans-2,6-disubstituted piperidines with N-sulfinyl delta-amino beta-ketoesters. Synthesis of (-)-lasubine I

[reaction: see text] The hydroxy-directed reduction of 1,2-dehydropiperidines with the "ate" complex of DIBAL-H and n-BuLi affords functionalized trans-2,6-disubstituted piperidines. This methodology was employed in the asymmetric synthesis of the quinolizidine alkaloid (-)-lasubine I.     

INVESTIGATION OF THE ATRP OF n-BUTYL METHACRYLATE USING THE Cu（I）／N,N,N＇ N＂ N＂-PENTAMETHYLDIETHYLENETRIAMINE CATALYST SYSTEM

The polymerization of n-butyl methacrylate was investigated using the Atom Transfer Radical Polymerization technique with CuBr and CuCl/N,N,N‘,N“,N“-pentamethyldiethylenetriamine catalytic systems. Various combinations of catalyst systems and initiators were utilized in order to optimize the polymerization conditions and to obtain well-defined polymers (i.e. controlled molecular weights and low polydispersities). It has been found that the optimal initiator for this system is a chlorine-based initiator, when the catalyst used is a Cu(I) salt in conjunction with the N,N,N‘,N“,N“-pentamethyldiethylenetriamine ligand. Bromine-based initiators tend to result in large amounts of initial termination, leading to polymers with less than ideal chain end functionality, even if CuCI is used as the Cu(I) species to invoke the halogen exchange. Additionally, the effects of the polymerization temperature, copper(I) species and the initiator structure were determined.     

Shell-cross-linked vesicles synthesized from block copolymers of Poly(D,L-lactide) and Poly(N-isopropyl acrylamide) as thermoresponsive nanocontainers

A polylactide (D,L-PLA) macroRAFT agent was prepared by utilizing a hydroxyl-functional trithiocarbonate as a coinitiator for the ring-opening polymerization. The length of the resultant polymer was controlled by the concentration of the coinitiator leading to the formation of two PLA polymers with M(n) = 12500 g mol(-)(1) (PDI = 1.46) and M(n) = 20500 g mol(-)(1) (PDI = 1.38) each with omega-trithiocarbonate functionality. Chain extension of PLA via the RAFT (free radical) polymerization of N-isopropyl acrylamide (NIPAAm) resulted in the formation of amphiphilic block copolymers with the PNIPAAm block increasing in size with conversion. TEM measurements of the aggregates obtained by self-organization of the block copolymers in aqueous solutions indicated the formation of vesicles. The sizes of these aggregates were influenced by the ratio of both blocks and the molecular weight of each block. The lower critical solution temperature (LCST) of the block copolymer was largely unaffected by the size of each block. UV turbidity measurements indicated a higher LCST for the block copolymers than for the corresponding PNIPAAm homopolymers. Stabilization of the vesicles was attained by a cross-linking chain extension of the PNIPAAm block using hexamethylene diacrylate. As the trithiocarbonate group was located between the PLA and PNIPAAm blocks, the chain extension resulted in a cross-linked layer between the core and corona of the vesicles.