Epitaxial growth of CdTe on Si through perovskite oxide buffers

For the first time, nanometer-thin perovskite oxide buffers have been used to accommodate the lattice mismatch between CdTe epitaxial layers and Si substrates. The resulting CdTe is single crystal with quality comparable to that grown by the more mature technology using micron-thick ZnTe or CdTe buffers. This shows that the use of nanometer-thin perovskite oxide buffers is a promising approach for the epitaxial growth of II–VI compounds on Si.     

Chemotaxis of nonbiological colloidal rods

Chemotaxis is the movement of organisms toward or away from a chemical attractant or toxin by a biased random walk process. Here we describe the first experimental example of chemotaxis outside biological systems. Platinum-gold rods 2.0 microm long exhibit directed movement toward higher hydrogen peroxide concentrations through "active diffusion." Brownian dynamics simulations reveal that no "temporal sensing" algorithm, commonly attributed to bacteria, is necessary; rather, the observed chemotaxis can be explained by random walk physics in a gradient of the active diffusion coefficient.     

Diversifying the solid state and lyotropic phase behavior of nonionic urea-based surfactants

The solid state and lyotropic phase behavior of 10 new nonionic urea-based surfactants has been characterized. The strong homo-urea interaction, which can prevent urea surfactants from forming lyotropic liquid crystalline phases, has been ameliorated through the use of isoprenoid hydrocarbon tails such as phytanyl (3,7,11,15-tetramethyl-hexadecyl) and hexahydrofarnesyl (3,7,11-trimethyl-dodecyl) or the oleyl chain (cis-octadec-9-enyl). Additionally, the urea head group was modified by attaching either a hydroxy alkyl (short chain alcohol) moiety to one of the nitrogens of the urea or by effectively "doubling" the urea head group by replacing it with a biuret head group. The solid state phase behavior, including the liquid crystal-isotropic liquid, polymorphic, and glass transitions, is interpreted in terms of molecular geometries and probable hydrogen-bonding interactions. Four of the modified urea surfactants displayed ordered lyotropic liquid crystalline phases that were stable in excess water at both room and physiological temperatures, namely, 1-(2-hydroxyethyl)-1-oleyl urea (oleyl 1,1-HEU) with a 1D lamellar phase (Lalpha), 1-(2-hydroxyethyl)-3-phytanyl urea (Phyt 1,3-HEU) with a 2D inverse hexagonal phase (HII), and 1-(2-hydroxyethyl)-1-phytanyl urea (Phyt 1,1-HEU) and 1-(2-hydroxyethyl)-3-hexahydrofarnesyl urea (Hfarn 1,3-HEU) with a 3D bicontinuous cubic phase (QII). Phyt 1,1-HEU exhibited rich mesomorphism (QII1, QII2, Lalpha, LU, and HII), as did one other surfactant, oleyl 1,3-HEU (QII1, QII2, Lalpha, LU, and HII), in the study group. LU is an unusual phase which is mobile and isotropic but possesses shear birefringence, and has been very tentatively assigned as an inverse sponge phase. Three other surfactants exhibited a single lyotropic liquid crystalline phase, either Lalpha or HII, at temperatures >50 degrees C. The 10 new surfactants are compared with other recently reported nonionic urea surfactants. Structure-property correlations are examined for this novel group of self-assembling amphiphiles.     

Site-specific functionalization on individual colloids: size control, stability, and multilayers

Individual colloidal particles are locally functionalized with nanoscale control. Here we use the particle lithography technique to mask one region of a silica or polystyrene particle (size 3.0 mum down to 170 nm), while the remaining 95% or more of the particle is coated with various sized nanocolloids. The images and data show precise and predictable control over the size of the region, with fine-tuned patch size control obtainable by changing the ionic strength of the solution. The coating on the particles remains stable even when subjected to sonication for 5 min. Both single regions and multilayer annuluses are readily formed. Particle lithography provides a general, reliable, stable, controllable, and scalable method for placing site-specific functionalizations on individual particles, opening the way to more complex particle patterning and the bottom-up assembly of more complex structures.     

A facile synthesis and antimicrobial activity of 2,10‐dichloro‐6‐(aryloxy/thiophenoxy)‐4,8‐dinitrodibenzol[d,g][1,3,6,2]‐dioxathiaphosphocin‐ 6‐oxides

Novel 6‐substituted 2,10‐dichloro‐4,8‐dinitrodibenzo[d,g][1,3,6,2]dioxathiaphosphocin‐6‐oxides 4 were synthesized by reacting 5,5′‐dichloro‐3,3′‐dinitro‐2,2′‐dihydroxydiphenyl sulfide ( 2 ) with different aryl phosphorodichloridates, trichloromethylphosphonic dichloride and O‐2‐chloroethyl phosphoryldichloride (3) in the presence of triethylamine at 55–60°. Some of these compounds are prepared by reacting the monochloride, 2,6,10‐trichloro‐4,8‐dinitrodibenzo[d,g][1,3,6,2]dioxathiaphosphoein‐6‐oxide ( 5 ) in situ with substituted phenols and thiols. 5 is prepared by condensing 2 with phosphorus oxychloride. The ¹H nmr chemical shifts of the dibenzodioxathiaphosphocin moiety indicates the presence of more than one conformer in solution. However the presence of more than one conformer in each example cannot be entirely eliminated. Interestingly 4d on oxidation to 12‐sulphone by H₂O₂ in acetic acid medium yielded only 12‐sulphoxide 6a . The ir, ¹H, ¹³C, ³¹P nmr and mass spectral data are discussed. Some of these compounds were screened for antifungal activity against Curvularia lunata and Aspergillus niger and antibacterial activity on Bacillus subtilis and Klebsiella pneumoniae. A few of them possess significant activity.     

An efficient high‐speed countercurrent chromatography method for preparative separation of javanicin from Fusarium solani,a fungus isolated from the fruiting body of the mushroom Trametes trogii

To develop an efficient method for large preparation of javanicin from Fusarium solani, a rapid and simple method by high‐speed countercurrent chromatography was established based on average polarity (P′ values) and partition coefficients (K values) of crude samples. A suitable solvent system for high‐speed countercurrent chromatography was selected from many possible biphasic solvent systems. HSCCC was successfully applied to separate and purify javanicin, the main bioactive component of solid cultures of the fungus F. solani isolated from the fruiting body of Trametes trogii, with petroleum ether–ethyl acetate–methanol–water (4:3:2:1, v/v) as solvent system. A total amount of 40.6 mg of javanicin was obtained from 100 mg crude sample. The purity of javanicin was 92.2% with a recovery of 95.1%, as determined by high‐performance liquid chromatrography. The molecular structure was identified primarily by NMR and MS methods. The results indicated that high‐speed countercurrent chromatography could be a powerful technology for separating naphthoquinones from the solid cultures of the fungus F. solani. It is also of significance that the separation of javanicin from natural source was carried out for the first time utilizing high‐speed countercurrent chromatography.     

Matrix Assisted Ionization: New Aromatic and Nonaromatic Matrix Compounds Producing Multiply Charged Lipid, Peptide, and Protein Ions in the Positive and Negative Mode Observed Directly from Surfaces

Matrix assisted inlet ionization (MAII) is a method in which a matrix:analyte mixture produces mass spectra nearly identical to electrospray ionization without the application of a voltage or the use of a laser as is required in laserspray ionization (LSI), a subset of MAII. In MAII, the sample is introduced by, for example, tapping particles of dried matrix:analyte into the inlet of the mass spectrometer and, therefore, permits the study of conditions pertinent to the formation of multiply charged ions without the need of absorption at a laser wavelength. Crucial for the production of highly charged ions are desolvation conditions to remove matrix molecules from charged matrix:analyte clusters. Important factors affecting desolvation include heat, vacuum, collisions with gases and surfaces, and even radio frequency fields. Other parameters affecting multiply charged ion production is sample preparation, including pH and solvent composition. Here, findings from over 100 compounds found to produce multiply charged analyte ions using MAII with the inlet tube set at 450?°C are presented. Of the compounds tested, many have ?COH or ?CNH₂ functionality, but several have neither (e.g., anthracene), nor aromaticity or conjugation. Binary matrices are shown to be applicable for LSI and solvent-free sample preparation can be applied to solubility restricted compounds, and matrix compounds too volatile to allow drying from common solvents. Our findings suggest that the physical properties of the matrix such as its morphology after evaporation of the solvent, its propensity to evaporate/sublime, and its acidity are more important than its structure and functional groups.     

Mid-frequency geoacoustic inversion using bottom loss data from the Shallow Water 2006 Experiment

Geoacoustic inversion work has typically been carried out at frequencies below 1 kHz, assuming flat, horizontally stratified bottom models. Despite the relevance to Navy sonar systems many of which operate at mid-frequencies (1-10 kHz), limited inversion work has been carried out in this frequency band. This paper is an effort to demonstrate the viability of geoacoustic inversion using bottom loss data between 2 and 5 kHz. The acoustic measurements were taken during the Shallow Water 2006 Experiment off the coast of New Jersey. A half-space bottom model, with three parameters density, compressional wave speed, and attenuation, was used for inversion by fitting the model to data in the least-square sense. Inverted sediment sound speed and attenuation were compared with direct measurements and with inversion results using different techniques carried out in SW06. Inverted results of the present work are consistent with other measurements, considering the known spatial variability in this area. The observations and modeling results demonstrate that forward scattering from topographical changes is important at mid-frequencies and should be taken into account in sound propagation predictions and geoacoustic inversion. To cope with fine-scale topographic variability, measurement technique such as averaging over tracks may be necessary.