Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163 μM with a detection limit of 2.86 μM (S/N = 3).     

Scanning tunneling microscopy study of the structure and orbital-mediated tunneling spectra of cobalt(II) phthalocyanine and cobalt(II) tetraphenylporphyrin on au(111): mixed composition films

Binary thin films of cobalt(II) phthalocyanine (CoPc) and cobalt(II) tetraphenylporphyrin (CoTPP) were prepared at submonolayer coverage on Au(111)/mica substrates byvapor deposition. All sample preparation and analysis were done under an ultrahigh vacuum. Scanning tunneling microscopy (STM) constant-current images of CoPc/CoTPP mixtures showed two close-packed surface structures, with different compositional percentages and some disorder. CoPc was also observed exclusively in one-dimensional chains and as single, isolated molecules below 220 K. Occupied and unoccupied orbital energy levels were identified by STM and tunnel-diode-based orbital-mediated tunneling spectroscopy. Occupied energy levels were also confirmed by ultraviolet photoelectron spectroscopy. The transient oxidation of the Co d(z2) orbital is identified in STM dI/dV(V) curves just negative of the 0 V sample bias for both molecules. Nearly identical constant-current contours are observed over the central Co2+ ions of CoTPP and CoPc, indicating that the attenuation of the d(z)2 orbital-mediated tunneling current induced by the structure of TPP relative to Pc is at most a factor of about 10. The orbital-mediated tunneling spectra of CoTPP and CoPc are distinctly different and allow these structurally similar species to be differentially identified.     

Potential-controlled switching of 2-(2'-thienyl)pyridine adsorbed on Au(111)

Switching between three different adsorbed states was achieved using potential control to separately induce electrochemical behaviour associated with changes in binding and orientation of the thiophene and pyridine moieties of 2-(2'-thienyl)pyridine adsorbed to Au(111) in neutral and basic solution.     

Thermochemistry of rare earth complexes [Ln(Ala)2(Im)(H2O)](ClO4)3 (Ln=Pr, Gd)

The two complexes, [Ln(Ala)₂(Im)(H₂O)](ClO₄)₃ (Ln=Pr, Gd), were synthesized and characterized. Using a solution-reaction isoperibol calorimeter, standard enthalpies of reaction of two reactions: LnCl₃⋅6H₂O(s)+2Ala(s)+Im(s)+3NaClO₄(s)=[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l) (Ln=Pr, Gd), at T=298.15 K, were determined to be (39.26±0.10) and (5.33±0.12) kJ mol^–1 , respectively. Standard enthalpies of formation of the two complexes at T=298.15 K, Δ_fH^Θ_m {[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)} (Ln=Pr, Gd), were calculated as –(2424.2±3.3) and –(2443.4±3.3) kJ mol^–1 , respectively.     

Two new triterpenoids from Gardenia jasminoides fruits

A new cycloartane triterpenoid, named gardenolic acid C (1), a new ursane triterpenoid, named 3β,16β,21β,23,24-pentahydroxy urs-12,18,20-trien-28-oic acid γ-lactone (2), together with three know triterpenoids, gardenolic acid A (3), gardenolic acid B (4), and 3α,16β,23,24-tetrahydroxy-28-nor-ursane-12,17,19,21-tetraen (5) were isolated from the fruits of Gardenia jasminoides Ellis. The structures of these compounds were elucidated by analyses of spectroscopic data. All isolates were evaluated for their neuroprotective effects in vitro.

     

Discovery of an all-donor aromatic [2]catenane

We report herein the first all-donor aromatic [2]catenane formed through dynamic combinatorial chemistry, using single component libraries. The building block is a benzo[1,2-b:4,5-b′]dithiophene derivative, a π-donor molecule, with cysteine appendages that allow for disulfide exchange. The hydrophobic effect plays an essential role in the formation of the all-donor [2]catenane. The design of the building block allows the formation of a quasi-fused pentacyclic core, which enhances the stacking interactions between the cores. The [2]catenane has chiro-optical and fluorescent properties, being also the first known DCC-disulphide-based interlocked molecule to be fluorescent.

An all-donor [2]catenane has been synthesised via dynamic combinatorial chemistry. It features stacked benzodithiophenes which are quasi-pentacyclic through hydrogen bonding.     

高中有机化学教材“烃类化合物”的国际比较研究

基于闫春更等建立的二维度四指标教材难度微观评价模型，重点对中国、美国、新加坡、澳大利亚、日本、英国的高中化学教材中"烃类化合物"内容的整合广度、表征深度进行测评和比较。研究发现6国教材内容的整合广度整体上差异不大，但其表征深度差异明显；美国教材注重学生认识物质的思路和方法的渗透，日本教材注重基本知识与技能的掌握，中国教材将概念诠释与样例分析相融合；英国、新加坡、美国教材注重情境推理或比较等信息处理策略的运用，对学习者学习的引导性较强。     

On-line Separation and Detection of Peptides by Capillary Electrophoresis / Electrospray FT-ICR-MS

Recently, capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI- MS) has been rapidly developed as a powerful analytical tool for charged species ranged from small molecules such as carboxylic acids1, phenolic compounds2, metal species3, tetramines4, herbicides5, drugs and drug metabolites6 to peptides and proteins7, 8. The ESI mode has proven to be sensitive, versatile and relatively easy to use in combination with CE. CE confers rapid analysis and efficient separ…     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

Mixed solutions of an associating polymer with a cleavable surfactant

Mixtures of hydrophobically modified hydroxyethyl cellulose (HMHEC) and alkali-sensitive cleavable betaine ester surfactants have been studied by viscometry, 1H NMR, absorbance measurements, and birefringence determinations. Before the hydrolysis, the surfactants behaved as conventional nondegradable surfactants in terms of the effect on the viscosity of increasing surfactant concentration. As the surfactants were hydrolyzed, systems with time-dependent viscosity were obtained. The viscosity either decreased monotonically or went through a maximum as a function of time, depending on the initial surfactant concentration. Different surfactant chain lengths gave rise to different viscosity profiles. The rate of hydrolysis, and thus the time-dependency of the surfactant concentration, could be controlled by changing the pH of the solution.