Broad-band GaAs monolithic equalizing amplifiers formultigigabit-per-second optical receivers

The authors discuss the development of ICs (integrated circuits) for a preamplifier, a gain-controllable amplifier, and main amplifiers with and without a three-way divider for multigigabit-per-second optical receivers using a single-ended parallel feedback circuit, two (inductor and capacitor) peaking techniques, and advanced GaAs process technology. An optical front-end circuit consisting of a GaAs preamplifier and an InGaAs p-i-n photodiode achieves a 3-dB bandwidth of 7 GHz and -12-dBm sensitivity at 10 Gb/s. Moreover, a gain-controllable amplifier obtains a maximum gain of 15 dB, a gain dynamic range of 25 dB, and a 3-dB bandwidth of 6.1 GHz by controlling the source bias of the common-source circuit. Gain, 3-dB bandwidth, and output power of the main amplifier with the three-way divider are 17.4 dB, 5.2 GHz, and 5 dBm, respectively. These ICs can be applied to optical receivers transmitting NRZ signals in excess of 7 Gb/s     

A variational approach to distribution function theory

We present a novel formalism for the generation of integral equations for the distribution functions of fluids. It is based on a cumulant expansion for the free energy. Truncation of the expansion at theKth term and minimization of the resulting approximation leads to equations for the distribution functions up toKth order.The formalism is not limited to systems with two-body interactions and does not require the addition of closure relations to yield a complete set of equations. In fact, it automatically generates superposition approximations, such as the Kirkwood three-body superposition approximation or the Fisher-Kopeliovich four-body one.The conceptual approach is adapted from the cluster variation method of lattice theory.     

Preparation and phase behavior of poly(4‐trimethylsilylstyrene)‐block‐polyisoprene

Three poly(4‐trimethylsilylstyrene)‐block‐polyisoprenes (TIs), the molecular weights of which were 82,000, 152,000 and 291,000 (TI‐82K, TI‐152K, and TI‐291K), were synthesized by sequential anionic polymerizations. The component polymers were a miscible pair that presented a lower critical solution temperature phase diagram if blended. The TI phase behavior was investigated with transmission electron microscopy. The order–disorder transition could be observed at a temperature between 200 °C (the ordered state) and 150 °C (the disordered state) for the block copolymer TI‐152K. The block copolymer TI‐82K presented the disordered state at 200 °C, whereas TI‐291K was in the ordered state at 150 °C. With the Flory–Huggins interaction parameter between poly(4‐trimethylsilylstyrene) and polyisoprene, which was evaluated by small‐angle neutron scattering for the block copolymers, the TI phase behavior could be reasonably explained by mean‐field theory. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1214–1219, 2005     

Novel High Precision Optoelectronic Device Fabrication Technique Using Guided Fluidic Assembly

High precision assembly of laser diodes (LDs) on silicon wafer substrates for use in advanced optoelectronic devices is an important issue from a mass production point of view. An acceptable alternative to replace an obsolete pick and place flip chip bonding robotic technology with a simple, low cost and high speed technique is desired for industrial applications. We have investigated a novel assembling technique with micrometer order accuracy for LDs and other microchips. Its feasibility for rapidly assembling a large number of high power edge emitting LDs is practically demonstrated. A 150 $mUm thick nickel metal mask is used to confine as well as guide the unassembled LDs into the recesses by its restricted displacements. This technique is based on guiding the LDs within a suitable fluidic medium and the assembling process is performed in two steps: (i) coarse precision with a confinement mask to bring LDs near the recesses to achieve high assembling efficiency and (ii) fine precision due to the electrode patterns on the base surface of LDs, under fluidic as well as gravitational force. The assembly of 80 red LDs of the same size and of 40 pairs of red and infrared LDs of two different sizes is successfully demonstrated within less than ±2 $mUm precision and 100% efficiency in a few seconds after transferring them into a confinement mask region.     

Novel design method for all-optical ultrafast gate switches using cascaded second-order nonlinear effect in quasi-phase matched LiNbO/sub 3/ devices

The authors propose a novel method of designing all-optical ultrafast gate switches that employ the cascade of the second harmonic generation and difference frequency mixing in quasi-phase matched LiNbO/sub 3/ devices. In this design method, the device length is maximized under the condition that crosstalk of the switch is maintained below a certain allowable value at a given bit rate. Following the design method, the authors find that the switching efficiency can significantly be enhanced by compensation for the walkoff between the fundamental and second harmonic pulses.     

Convergence of Rothe's Method in Hölder Spaces

The convergence of Rothe's method in Hölder spaces is discussed. The obtained results are based on uniform boundedness of Rothe's approximate solutions in Hölder spaces recently achieved by the first author. The convergence and its rate are derived inside a parabolic cylinder assuming an additional compatibility conditions.     

Low energy SIMS study on multi-built-up layer of cobalt(II) stearate

The surface of multi-built-up layer of cobalt(II) stearate on copper substrate has been studied by means of low energy SIMS. The sampling surfaces were impacted with 700 eV, 8 × 10^?7 Å/cm², Ar⁺ ions. In each group (odd-numbered accumulated and even-numbered accumulated samples), the ⁵⁸Co⁺ intensities at the initial bombardment responded to the number of the accumulation, respectively. The ⁵⁸Co⁺ ion intensities from even-numbered accumulated samples were observed more than the expected values from a proportionality between the accumulation number and ⁵⁸Co⁺ intensities.     

Reliable Polymer-Stabilized Ferroelectric Liquid Crystal Device Using Thin Plastic Substrates

We developed a rollable polymer-stabilized ferroelectric liquid crystal (FLC) display device using thin plastic substrates. In a device using 200-μm-thick substrates which are fastened by polymer walls and networks made by photopolymerization-induced phase separation, disorder of the FLC alignment was caused by exfoliation of these walls in curvature radii of under 30 mm. Otherwise, the uniformity of the FLC alignment was maintained even after a device using 100-μm-thick substrates was bent at a radius of 7 mm. The enhanced bending tolerance does not depend on the FLC alignment direction, and the device could be bent both convexly and concavely without any FLC alignment change. A rollable device with a size of 100 × 100 mm exhibited uniform grayscale display operation between crossed polarizers when bent with a radius of 15 mm.     

Tunneling spectroscopy of isolated gold clusters grown on thiol/dithiol mixed self-assembled monolayers

We report a scanning tunneling spectroscopy study on the size-tunable isolated gold nanoclusters grown on thiol/dithiol mixed self-assembled monolayers (SAMs) where the effect of neighboring clusters are practically excluded. The structure forms double tunnel junction system in which the spectra exhibit Coulomb staircases. With increasing cluster size the standard deviation of the offset charge distribution for clusters increases, accompanied with the increase of total capacitance. The results are qualitatively same with the previous ones where clusters are densely grown on the substrate, indicating that this behavior is an intrinsic property for the double tunnel junction structures of tip/vacuum/single cluster/SAMs/Au(1 1 1) systems.