Anomalous PL brightening caused by partial Auger recombination of a (D, X) complex during an impact ionization avalanche in n-GaAs

Partial Auger recombination of the (D⁰, X) bound-exciton in n-GaAs at 4.2 K during an impact ionization avalanche under an applied pulse voltage has been investigated. The bright photoluminescence (PL)-pattern observed by applying the pulse voltage, characterizes well the formation of a current density filament. The observation of the bright PL spectra inside the current density filament gives a quite new result concerning the partial Auger recombination process of the (D⁰, X) complex, leaving the neutral donor in the excited states.     

Narrow spectral linewidth characteristics of monolithic integrated-passive-cavity InGaAsP/InP semiconductor lasers

The spectral linewidth of 1.3 ?m monolithic integrated-passive-cavity (IPC) semiconductor laser is measured by a delayed self-heterodyne technique. It is found that the line-width is narrowed when longitudinal submode is suppressed. The narrowest linewidth obtained so far is 900 kHz at 6 mW output power.     

Conditional Data Mapping Flip-Flops for Low-Power and High-Performance Systems

This paper introduces a new family of low-power and high-performance flip-flops, namely conditional data mapping flip-flops (CDMFFs), which reduce their dynamic power by mapping their inputs to a configuration that eliminates redundant internal transitions. We present two CDMFFs, having differential and single-ended structures, respectively, and compare them to the state-of-the-art flip-flops. The results indicate that both CDMFFs have the best power-delay product in their groups, respectively. In the aspect of power dissipation, the single-ended and differential CDMFFs consume the least power at data activity less than 50%, and are 31% and 26% less power than the conditional capture flip-flops at 25% data activity, respectively. In the aspect of performance, CDMFFs achieve small data-to-output delays, comparable to those of the transmission-gate pulsed latch and the modified-sense-amplifier flip-flop. In the aspect of timing reliability, CDMFFs have the best internal race immunity among pulse-triggered flip-flops. A post-layout case study is demonstrated with comparison to a transmission-gate flip-flop. The results indicate the single-ended CDMFF has 34% less in data-to-output delay and 28% less in power at 25% data activity, in spite of the 34% increase in size     

Monolithic rat-race mixers for millimeter waves

In this paper, we report on fully monolithic millimeter-wave Schottky-barrier diode (SBD) down-converters with an IF amplifier using heterojunction bipolar transistors (HBT's). A rat-race circuit is used for the mixer, and is analyzed using a harmonic-balance simulator. The measured conversion gain and the isolation are 7.1 and 29 dB in the V-band design, and 8.0 and 25 dB in the W-band design, respectively. The conversion gains are matched well with the circuit simulation     

Comparison of the effect of a proteolytic enzyme dispase and a chelator for the preparation of epidermal sheet from nude mice.

Histochemical studies of epidermal Langerhans cells require well-preserved epidermal sheets. We studied the conditions for the preparation of the epidermal sheets from the skin of the ear, hind limb and trunk of nude mice. Two types of commercial dispase, and ethylenediaminetetraacetic acid (EDTA), were used at several concentrations and the effects were compared. Dermo-epidermal separation was evaluated by the preservation of ATPase activity of Langerhans cells in the epidermal sheet and by the ultrastructure of epidermal cells (Langerhans cells and keratinocytes) as well as epidermal-dermal junction. Good separation depended on the combination of the concentration of the reagent and site of the skin. The concentrations of both dispase and EDTA effective for separation of the epidermis in the nude mouse were lower than those in other mouse strains reported.     

FPGA-Based Decentralized Control of Arrayed MEMS for Microrobotic Application

In this paper, the authors have developed and implemented a decentralized decision-making strategy using field-programmable gate array (FPGA) technology as a prototype for an integrated controller of a microelectromechanical systems (MEMS) array for air-flow planar micromanipulation. The MEMS array was proposed to be integrated in a hybrid multichip module containing the FPGA-based controller. Algorithms and architectures, used for the decentralized control implementation and the hardware resource optimization, are described. A charge-coupled device camera was used to make each MEMS like an autonomous system when the distributed MEMS chip was tested. Finally, under air-flow condition, the FPGA-based decentralized control system successfully performed an object manipulation.     

Precise synthesis of porphyrin array scaffolding polyisocyanides

Aryl isocyanides bearing free‐base and metallo‐porphyrins were prepared and polymerized with a Pd–Pt μ‐ethynediyl complex as the initiator to give polymers with narrow polydispersity indices. The molecular weights of the resulting polymers were precisely controlled by the initial feed ratio of the porphyrin monomer to the initiator. The UV–VIS spectra suggested that the porphyrin pendants are regularly arranged to form stacked columns. Metallo‐porphyrin polymers were also prepared by reacting free‐base porphyrin polymers with metal salts. The successive reactions of free‐base and zinc‐porphyrin monomers resulted in the formation of diblock polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 585–595, 2006     

Stereocontrol of diene polymers by topochemical polymerization of substituted benzyl muconates and their crystallization properties

We report the stereocontrol of diene polymers by the topochemical polymerization of alkoxy-substituted benzyl muconates in the solid state. A monomer stacking structure is controlled by the weak intermolecular interactions in the monomer crystals, depending on the structure and position of the alkoxy-substituent. The translational and alternating types of molecular stacking structures in a column provide diisotactic and disyndiotactic polymers, respectively, by the solid-state polymerization under UV and γ-ray irradiation. On the other hand, the meso and racemo structures of the resulting polymers are determined by the molecular symmetry of the used muconate monomers. The various substituted benzyl ester polymers are transformed into the same ethyl ester polymers with the four types of tacticities. The structure and crystallization behavior of the substituted benzyl ester polymers as well as the ethyl ester polymers have been revealed in detail. We clarify the effects of the tacticity on the crystallization property of the stereoregular polymuconates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4952–4965, 2006