Ultraviolet-C light for treatment of Candida albicans burn infection in mice

Burn patients are at high risk of invasive fungal infections, which are a leading cause of morbidity, mortality, and related expense exacerbated by the emergence of drug resistant fungal strains. In this study, we investigated the use of UVC light (254 nm) for the treatment of yeast Candida albicans infection in mouse third degree burns. In vitro studies demonstrated that UVC could selectively kill the pathogenic C. albicans compared with a normal mouse keratinocyte cell line in a light exposure dependent manner. A mouse model of chronic C. albicans infection in non-lethal third degree burns was developed. The C. albicans strain was stably transformed with a version of the Gaussia princeps luciferase gene that allowed real-time bioluminescence imaging of the progression of C. albicans infection. UVC treatment with a single exposure carried out on day 0 (30 min postinfection) gave an average 2.16-log(10)-unit (99.2%) loss of fungal luminescence when 2.92 J cm(-2) UVC had been delivered, while UVC 24 h postinfection gave 1.94-log(10)-unit (95.8%) reduction of fungal luminescence after 6.48 J cm(-2). Statistical analysis demonstrated that UVC treatment carried out on both day 0 and day 1 significantly reduced the fungal bioburden of infected burns. UVC was found to be superior to a topical antifungal drug, nystatin cream. UVC was tested on normal mouse skin and no gross damage was observed 24 h after 6.48 J cm(-2). DNA lesions (cyclobutane pyrimidine dimers) were observed by immunofluorescence in normal mouse skin immediately after a 6.48 J cm(-2) UVC exposure, but the lesions were extensively repaired at 24 h after UVC exposure.     

Development of interdigitated arrays coated with functional polyaniline/MWCNT for electrochemical biodetection: application for human papilloma virus

In this study, polyaniline-multiwalled carbon nanotube film (PANi-MWCNT) has been polymerized on interdigitated platinum electrode arrays (IDA), fabricated by MEMS technology for the detection of human papillomavirus (HPV) infection, using immobilized peptide aptamers as affinity capture reagent. Label-free, electrochemical detection of the specific immune reaction between antigen peptide aptamer HPV-16-L1 (with a molecular weight of 1825 Da), the most common genotype in cytological normal women worldwide, and its specific antibody of HPV-16 (which is much bigger with molecular weight of ca. 150 kDa) on multifunctional PANi-MWCNT based arrays was reported. The most significant advantage of this technique consists of reagentless and multiple detection of antigen-antibody complex formation on well conducting IDA interface of PANi-MWCNT, without intermediate steps or any labeling reagents, as normally required in the previous works.     

Di-p-nitrobenzyl azodicarboxylate (DNAD): an alternative azo-reagent for the Mitsunobu reaction

Di-p-nitrobenzyl azodicarboxylate is prepared in 83.6% yield in two steps as a bright yellow solid, which can be used as an azo-reagent in the Mitsunobu reaction. When a chiral secondary alcohol was used, sufficient configurational inversion of alcohol occurred under Mitsunobu conditions. That the hydrazine produced from DNAD is semisoluble in some solvents such as THF and CH₂Cl₂ makes it separated easily from the reaction mixture just via filtration. Then the recovered hydrazine compound can be re-exposed to oxidant to produce DNAD. Because DNAD is more stable than DIAD at ambient temperatures and allows easy separation, it is a good alternative azo-reagent for the Mitsunobu reaction.     

Differentiating a diverse range of volatile organic compounds with polyfluorophore sensors built on a DNA scaffold

Oligodeoxyfluorosides (ODFs) are short DNA-like oligomers in which DNA bases are replaced with fluorophores. A preliminary study reported that some sequences of ODFs were able to respond to a few organic small molecules in the vapor phase, giving a change in fluorescence. Here, we follow up on this finding by investigating a larger range of volatile organic analytes, and a considerably larger set of sensors. A library of tetramer ODFs of 2401 different sequences was prepared by using combinatorial methods, and was screened in air for fluorescence responses to a set of ten different volatile organics, including multiple aromatic and aliphatic compounds, acids and bases, varied functional groups, and closely related structures. Nineteen responding sensors were selected and characterized. These sensors were cross-screened against all ten analytes, and responses were measured qualitatively (by changes in color and intensity) and quantitatively (by measuring ΔR, ΔG, and ΔB values averaged over five to six sensor beads; R=red, G=green, B=blue). The results show that sensor responses were diverse, with a single sensor responding differently to as many as eight of the ten analytes; multiple classes of responses were seen, including quenching, lighting-up, and varied shifts in wavelength. Responses were strong, with raw ΔR, ΔG, and ΔB values of as high as >200 on a 256-unit scale and unamplified changes in many cases apparent to the naked eye. Sensors were identified that could distinguish clearly between even very closely related compounds such as acrolein and acrylonitrile. Statistical methods were applied to select a small set of four sensors that, as a pattern response, could distinguish between all ten analytes with high confidence. Sequence analysis of the full set of sensors suggested that sequence/order of the monomer components, and not merely composition, was highly important in the responses.     

Typing of unknown microorganisms based on quantitative analysis of fatty acids by mass spectrometry and hierarchical clustering

Rapid identification of unknown microorganisms of clinical and agricultural importance is not only critical for accurate diagnosis of infections but also essential for appropriate and prompt treatment. We describe here a rapid method for microorganisms typing based on quantitative analysis of fatty acids by iFAT approach (Isotope-coded Fatty Acid Transmethylation). In this work, lyophilized cell lysates were directly mixed with 0.5M NaOH solution in d3-methanol and n-hexane. After 1 min of ultrasonication, the top n-hexane layer was combined with a mixture of standard d0-methanol derived fatty acid methylesters with known concentration. Measurement of intensity ratios of d3/d0 labeled fragment ion and molecular ion pairs at the corresponding target fatty acids provides a quantitative basis for hierarchical clustering. In the resultant dendrogram, the Euclidean distance between unknown species and known species quantitatively reveals their differences or shared similarities in fatty acid related pathways. It is of particular interest to apply this method for typing fungal species because fungi has distinguished lipid biosynthetic pathways that have been targeted for lots of drugs or fungicides compared with bacteria and animals. The proposed method has no dependence on the availability of genome or proteome databases. Therefore, it is can be applicable for a broad range of unknown microorganisms or mutant species.     

Preparation of a novel cyclodextrin derivative of benzimido-β-cyclodextrin and its enantioseparation performance in HPLC

A novel cyclodextrin (CD) derivative, mono-6-deoxy-benzimide-β-CD (MB-β-CD), in which a rigid substituent was linked to the narrow edge of the CD with a flexible H(2)C-N group, was successfully synthesized through the condensation of mono-6-deoxy-6-amino-β-cyclodextrin and benzaldehyde. To evaluate its enantioseparation abilities and investigate the role of the CD substituents and linkage in chiral recognition, MB-β-CD and mono-6-deoxyphenylimine-β-CD (MP-β-CD) with a rigid linkage were compared in the separation of 36 chiral compounds in a methanol/water mobile phase. The separation results showed that most of the analytes with rigid structures afforded better enantioresolutions on the MP-β-CD (with a rigid linkage) chiral stationary phase (CSP), while better enantioseparations for analytes with flexible structures and big steric hindrance were obtained on the MB-β-CD (with a flexible linkage) CSP. The former exhibited a specificity for the analyte structures, while the latter was more adaptable. Molecular dynamics simulations were performed to further understand the discrimination process and the function of the CD side arm.     

基于液滴微流控接口的高效液相色谱-毛细管电泳二维分离平台初探

蛋白质组体系的高度复杂性需要更高分辨率的多维分离技术。近年兴起的液滴技术在微纳尺度样品操控方面具有微体积、低扩散、无返混等独特优势,有望为多维分离平台的接口提供解决方案。通过采用不同结构的液滴微流控芯片可以实现“液滴生成”与“油相排除”功能,进行样品由连续流-非连续流-连续流的高效转移,将不同的分离模式进行二维耦联。本研究利用液滴作为接口技术耦联高效液相色谱与毛细管电泳构建二维分离系统,以蛋白质降解的复杂多肽混合物为样品,考察了液滴接口二维分离平台的可行性和有效性,并获得3000以上的峰容量,初步展示了该接口技术在多维分离分析领域的应用潜力。     

基于液相色谱-质谱联用技术的代谢组学方法用于中药通心络和人参对过度疲劳大鼠干预作用的评价

用代谢组学方法评价了中药通心络和人参对过度疲劳大鼠的干预作用.通过构造大鼠过度疲劳模型,并分别用通心络和人参进行干预,采用快速液相色谱-离子阱飞行时间质谱(UFLC-IT-TOF-MS)获取大鼠血浆代谢轮廓,并用正交偏最小二乘法(OPLS)进行多变量统计分析,分别找出用于区分通心络和人参干预组大鼠同正常对照大鼠、过度疲...     

Unexpected Adsorption Capacity of Ca-deficient Hydroxyapatite in Oil/water System

Symmetrical diynes were synthesized by ligand‐free copper‐catalyzed homocoupling reaction of 1,1‐dibromo‐1‐alkenes using a DBU/DMSO system at room temperature in good to excellent yields dot.^?1.