A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

Quantum HeisenbergS=1/2 spin glass with ferromagnetic coupling and random Dzyaloshinskii-Moriya interactions

By means of the generalized static replica symmetric spin glass theory, a quantum HeisenbergS=1/2 spin glass model with the infinite-ranged random Dzyaloshinskii-Moriya (DM) interaction and ferromagnetic coupling is investigated. The dependence of entropy, specific heat, susceptibility and the corresponding order parameters on temperature is studied numerically for different ferromagnetic interactions and fixed anisotropy. Two spin glass phases has been found including transverse and mixed spin glass phases. It has been shown that the local susceptibility exhibits double-cusp features for different ferromagnetic coupling (J ₀). Phase transition poins are found in the specific heat-temperature plane at various ferromagnetic coupling values. Additionally, the dependence of the spontaneous moment on temperature is calculated.     

PEO-based composite lithium polymer electrolyte, PEO-BaTiO3-Li(C2F5SO2)2N

Polyethylene oxide (PEO) based polymer electrolytes with BaTiO₃ as filler and Li(C₂F₅SO₂)₂N as salt have been examined in lithium polymer batteries. The aluminum disolution potential in PEO-Li(C₂F₅SO₂)₂N was estimated to be 4.1 V vs. Li/Li⁺ at 80 °C, which was compared to that of 3.8 V vs. Li/Li⁺ in PEO-Li(CF₃SO₂)₂N. The electrical conductivity of the system was measured as a function of O/Li ratio. The highest conductivity was observed in O/Li=8. The conductivity was 1.65×10⁻³ S/cm at 80 °C and 1.5×10⁻⁵ S/cm at 25 °C. The interfacial resistance of Li/polymer electrolyte/Li annealed at 80 °C for 15 days was lower than 100 Ωcm². Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16 – 22, 2001.     

新颖的PPLN电光开关

在分析基于级联二阶非线性效应的准相位匹配周期极化铌酸锂(PPLN)波导全光波长变换器的有关参量容限的基础上,提出PPLN波长变换器的电光调控设想,并给予简要论证,论证结果是可行的,从而可实施电控调谐来自动补偿其失配,进而也可实现光开关的功能 关键词： 准相位匹配 周期极化铌酸锂 波长变换 光开关 电光效应调控     

一种改进的射频加解扰方法

文中提出了一种改进的射频加解扰新方法，采用视频加扰与射频解扰相结合的技术，利用（Ｎ＋１）个电视射频频道实现对Ｎ路电视信号的加扰。     

双轴晶体Nd^3＋：KGd（WO4）2的非偏振吸收光谱研究

报道了用三个方向相互垂直的非偏振吸收光谱测量计算Ｊｕｄｄ－Ｏｆｅｌｔ参数从而算出双轴晶体Ｎｄ３＋ＫＧｄ（ＷＯ４）２的荧光寿命、荧光分支比和发射截面的方法。得到的荧光寿命为１１９μｓ，平均发射截面为２．３×１０－１９ｃｍ２。     

单模光纤的传输衰减随温度变化的研究

本文从实验上测量了单模石英光纤在－50～120℃范围内的损耗。随着温度升高，光纤的损耗随之降低，在常温附近达到最小。其后损耗随着温度的继续升高而增加。损耗的变化主要是由于杂质的吸收和微弯损耗。本文对杂质的吸收以及微弯损耗进行了数值模拟，并且从理论上定性地解释了损耗对温度的依赖关系。     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

矩孔金属光栅矢量模式理论的数值计算

根据矩孔金属光栅的矢量模式理论，计算了不同入射方向，波长及偏振态情况下衍射场的分布，研究了不同光栅结构对衍射效率，偏振态变化的影响；同时，根据实际需要，加工制作了一批不同深度的矩孔光栅样品，进行了实验测量，并将计算值与实验值进行了比较，两者基本相符。     

线列阵甚宽频带恒定束宽的数字实现方法

线性嵌套阵可以很好地在很宽的频率（N个倍频程，N=7）上实现恒定束宽。这种方法设计简单，又节省线阵阵元。本文给出了线性嵌套阵具体的数字化实现方法，解决了FIR滤波器设计，滤波器时间延迟等问题。由于数字化实现过程中使用了很多组FIR滤波器，计算量很大，文章采用了DSP信号处理板实现数字化算法，利用DSP处理板可以多任务同时处理优势，解决了计算量大的问题。经过实验验证，在DSP上实现的数字化的线性嵌套阵宽带恒定束宽方法满足了工程上实时处理的需要。