钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

中物院远红外自由电子激光实验研究

中国工程物理研究院基于射频直线加速器技术的远红外自由电子激光(FIR-FEL)实验取得阶段性进展,于2005年3月24晚8时30分首次出光, 并多次重复. 中心波长115μm, 谱宽1%.介绍了实验系统的主要组成部分和主要实验结果.     

Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

A New View on Fuzzy Hypermodules

We describe the relationship between the fuzzy sets and the algebraic hyperstructures. In fact, this paper is a continuation of the ideas presented by Davvaz in （Fuzzy Sets Syst., 117： 477- 484, 2001） and Bhakat and Das in （Fuzzy Sets Syst., 80： 359-368, 1996）. The concept of the quasicoincidence of a fuzzy interval value with an interval-valued fuzzy set is introduced and this is a natural generalization of the quasi-coincidence of a fuzzy point in fuzzy sets. By using this new idea, the concept of interval-valued （α,β）-fuzzy sub-hypermodules of a hypermodule is defined. This newly defined interval-valued （α,β）-fuzzy sub-hypermodule is a We shall study such fuzzy sub-hypermodules and sub-hypermodules of a hypermodule. generalization of the usual fuzzy sub-hypermodule. consider the implication-based interval-valued fuzzy     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Microwave-assisted Regioselective 1-O-Deacylation of Peracylated Glycopyranoses on Alumina

A facile, rapid and regioselective method for the 1-O-deacylation of peracylated glycopyranoses is described which occurs under mild conditions by absorption onto alumina using microwave irradiation.     

广义预测控制系统的仿真软件设计与开发

介绍了基于广义预测控制的模型预测控制（MPC）系统仿真软件的开发与实现过程。该软件包含了MAC，IMAC，DMC，DDMC和GPC五种预测控制算法，可以用不同的方法实现对预测控制系统的综合性仿真以及控制器参数的调整。利用该软件可对模型预测控制系统的作用机理做进一步仿真分析，并有助于定性分析各种算法中设计参数对系统性能的影响以及不同算法之间的区别。     

采用多级技术的DBF雷达CCAB算法

数字波束形成算法中,CCAB算法在较高信干噪比条件下具有一定优势。但是计算时需要求逆矩阵,在阵元数较多的情形下运算量极大,很难实时实现,严重制约了其进一步的应用。提出了一种基于原有CCAB算法的多级计算方法,可以有效地减少运算量。实验表明,该方法虽然其信噪比性能比普通CCAB算法有所下降,但是仍能在干扰方向上形成较深的零陷并有效地抑制干扰,能够进一步应用于实际工程中。