介绍《电工电子实践课程丛书》--东南大学电工电子系列实践课程教改成果之一

本文介绍由东南大学组织编写，东南大学出版社出版的《电工电子实践课程丛书》的编写背景，每本教材内容的简要内容，特色与使用情况。     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Analysis of Surface Plasmon Polariton Using Anisotropic Finite Elements

The anisotropic finite-element mesh is deployed in a vector finite-element method to numerically derive surface plasmon polaritons (SPPs) more efficiently. The superiority of the anisotropic mesh lies in the fact that SPP modes, predictably, have a sharp field variation in the surface-normal direction, whereas the variation along the surface-tangent direction is comparably gentle. A case study on metallic fiber shows that the employment of anisotropic finite elements reduces the problem size by a factor of seven.     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

利用谱线宽度测人发中的微量元素

通过实验证明了可以利用谱线宽度做永久工作曲线用于光谱定量分析。给出了用于测量人发中微量元素Ｃｕ，Ｚｎ，Ｆｅ和Ｃａ的永久工作曲线，利用这些工作曲线对实际样品进行了测定，所得结果与用ＩＣＰ－ＡＥＳ测得的结果相吻合。     

超高真空中银表面垂直谐波电流的实验测量

在超高真空的条件下,测量了清洁、自由银表面产生的光学二次谐波随基波电矢量与入射面之间夹角(?)的变化,从而通过理论公式,求得由Rudnick和Stern引入的,用于衡量垂直面电流密度的唯象参数a的值,在入射基频光波长为1.064μm时,被测定为-4.0±0.8.     

一种由[Ag(CN)2]-和Mn(Ⅱ)建筑块组装的三个三维网穿插的超分子配合物的结构和荧光性质

0 Introduction Recently, a considerable effort on crystal engi- neering has been devoted to the research of supramolecular assemblies because they show abun- dant topologic structures and offer possibilities for po- tential applications of functional mate…