Rheology of asphaltene-toluene/water interfaces

The stability of water-in-crude oil emulsions is frequently attributed to a rigid asphaltene film at the water/oil interface. The rheological properties of these films and their relationship to emulsion stability are ill defined. In this study, the interfacial tension, elastic modulus, and viscous modulus were measured using a drop shape analyzer for model oils consisting of asphaltenes dissolved in toluene for concentrations varying from 0.002 to 20 kg/m(3). The effects of oscillation frequency, asphaltene concentration, and interface aging time were examined. The films exhibited viscoelastic behavior. The total modulus increased as the interface aged at all asphaltene concentrations. An attempt was made to model the rheology for the full range of asphaltene concentration. The instantaneous elasticity was modeled with a surface equation of state (SEOS), and the elastic and viscous moduli, with the Lucassen-van den Tempel (LVDT) model. It was found that only the early-time data could be modeled using the SEOS-LVDT approach; that is, the instantaneous, elastic, and viscous moduli of interfaces aged for at most 10 minutes. At longer interface aging times, the SEOS-LVDT approach was invalid, likely because of irreversible adsorption of asphaltenes on the interface and the formation of a network structure.     

Perylene synthesis by the parallel cycloaromatization of adjacent enediynes

As part of an investigation into new synthetic routes to poly(peri-naphthalene), the synthesis and cycloaromatization of tetraethynylbiphenyls is described. The temperature-dependent cyclization of biphenyls containing unsubstituted alkynes provides the desired perylene in good yield.     

Incorporation of a DNAzyme into Au-coated nanocapillary array membranes with an internal standard for Pb(ii) sensing

A Pb(ii)-specific DNAzyme has been successfully incorporated into Au-coated polycarbonate track-etched (PCTE) nanocapillary array membranes (NCAMs) by thiol-gold immobilization. Incorporation of the DNAzyme into the membrane provides a substrate-bound sensor using a novel internal control methodology for fluorescence-based detection of Pb(ii). A non-cleavable substrate strand, identical to the cleavable DNAzyme substrate strand except the RNA-base is replaced by the corresponding DNA-base, is used for ratiometric comparison of intensities. The cleavable substrate strand is labeled with fluorescein, and the non-cleavable strand is labeled with a red fluorophore (Cy5 or Alexa 546) for detection after release from the membrane surface. This internal standard based ratiometric method allows for real-time monitoring of Pb(ii)-induced cleavage, as well as standardizing variations in substrate size, solution detection volume, and monolayer density. The result is a Pb(ii)-sensing structure that can be stored in a prepared state for 30 days, regenerated after reaction, and detect Pb(ii) concentrations as low as 17 nM (3.5 ppb).     

Trimethylsilylation of framework Brønsted acid sites in microporous zeolites and silico-aluminophosphates

Framework-bound alkoxy groups are well-studied intermediates in zeolite chemistry, but their low stability complicates their spectroscopic study in high-temperature reactions such as alkylation or dealkylation. Taking advantage of the much higher bond strength of Si-O versus C-O, we synthesized trimethylsilylated zeolites by reacting them with phenyltrimethylsilane in a catalytic flow reactor at 648 K. In favorable cases, the reaction accurately titrated the acid sites, and 29Si and 13C MAS NMR spectra of the derivatized catalysts measured at room temperature confirmed the proposed reaction.     

CO2 in supramolecular chemistry: preparation of switchable supramolecular polymers

CO2 gas was used to construct novel types of supramolecular polymers. Self-assembling nanostructures 11 and 13 were prepared, which employ both hydrogen bonding and dynamic, thermally reversible carbamate bonds. As precursors, calixarene ureas 1 and 2 were synthesized, which strongly aggregate/dimerize (K(D)>/=10(6) M(-1) per capsule) in apolar solution with the formation of self-assembling capsules 7 and linear polymeric chains 8, respectively, and also possess "CO2-philic" primary amino groups on the periphery. CO2 effectively reacts with molecules 7 and 8 in apolar solvents and cross-links them with the formation of multiple carbamate salt bridges. Oligomeric aggregate 11 and three-dimensional polymeric network 13 were prepared and characterized by 1H and 13C NMR spectroscopy. The morphology of supramolecular gel 13 was studied by scanning electron microscopy. Addition of a competitive solvent destroyed the hydrogen bonding in assembling structures 11 and 13, but did not influence the carbamate linkers; carbamate salts 12 and 14, respectively, were obtained. On the other hand, thermal release of CO2 from 11 and 13 was easily accomplished (1 h, 100 degrees C) while retaining the hydrogen-bonding capsules. Thus, three-dimensional polymeric network 13 was transformed back to linear polymeric chain 8 without breaking up. Encapsulation and storage of solvent molecules by 11 and 13 was demonstrated. This opens the way for switchable materials, which reversibly trap, store, and then release guest molecules. A two-parameter switch and control over hydrogen bonding and CO2-amine adducts was established.     

Evaporation of microdroplets of ethanol-water mixtures on gold surfaces modified with self-assembled monolayers

The wetting property and evaporation behavior of ethanol-water mixtures of various concentrations on gold surfaces modified with 1-decanethiolate self-assembled monolayers (SAMs) were studied by digital contact angle analysis. It has been shown that the initial contact angle decreases monotonically with increased concentration of ethanol in the mixture. Evaporation studies revealed a general trend with a preliminary increase in contact angle accompanied with a decrease in contact area, then a constant contact angle accompanied with a slower, linear decrease in contact area. At the very beginning of the evaporation process, the contact angles showed a rapid decrease for the microdroplets of a binary mixture with equal volume fractions (i.e., 50% ethanol). Three distinct stages of the evaporation profile for the ethanol-water mixtures were observed, which differ from the inclusive "pinning" and "shrinking" behavior observed for the pure liquid case. Ultimately, the study makes possible the use of an evaporation profile to monitor the change in concentration of a binary system and allows a better understanding of the interactions between liquid microdroplets with solid substrates.     

Stereocontrolled syntheses of kainoid amino acids from 7-azabicyclo[2.2.1]heptadienes using tandem radical addition-homoallylic radical rearrangement

[reaction; see text] N-Boc syn-7-(2-hydroxyethyl)-4-(alkyl or aryl)sulfonyl-2-azabicyclo[2.2.1]hept-5-enes serve as precursors in syntheses of the neuroexcitants 3-(carboxymethyl)pyrrolidine-2,4-dicarboxylic acid 43, alpha-kainic acid 12, alpha-isokainic acid 14, and alpha-dihydroallokainic acid 77. The key step in these syntheses is the intermolecular radical addition of 2-iodoethanol to a N-Boc 2-(alkyl or aryl)sulfonyl-7-azabicyclo[2.2.1]heptadiene 7 to induce nitrogen-directed homoallylic radical rearrangement. Oxidative cleavage of the resulting 2-azabicyclo[2.2.1]hept-5-enes provide straightforward access to polysubstituted pyrrolidines and, in particular, an efficient entry to the kainoid amino acids.     

Structural analysis of articular cartilage using multiphoton microscopy: input for biomechanical modeling

The 3-D morphology of chicken articular cartilage was quantified using multiphoton microscopy (MPM) for use in continuum-mechanical modeling. To motivate this morphological study we propose aspects of a new, 3-D finite strain constitutive model for articular cartilage focusing on the essential load-bearing morphology: an inhomogeneous, poro-(visco)elastic solid matrix reinforced by an anisotropic, (visco)elastic dispersed fiber fabric which is saturated by an incompressible fluid residing in strain-dependent pores. Samples of fresh chicken cartilage were sectioned in three orthogonal planes and imaged using MPM, specifically imaging the collagen fibers using second harmonic generation. Employing image analysis techniques based on Fourier analysis, we derived the principal directionality and dispersion of the collagen fiber fabric in the superficial layer. In the middle layer, objective thresholding techniques were used to extract the volume fraction occupied by extracellular collagen matrix. In conjunction with information available in the literature, or additional experimental testing, we show how this data can be used to derive a 3-D map of the initial solid volume fraction and Darcy permeability.     

Toward a robust and general molecular simulation method for computing solid-liquid coexistence

A rigorous and generally applicable method for computing solid-liquid coexistence is presented. The method overcomes some of the technical difficulties associated with other solid-liquid simulation procedures and can be implemented within either a molecular dynamics or Monte Carlo framework. The method consists of three steps: First, relative Gibbs free energy curves are created for the solid and liquid phases using histogram reweighting. Next, the free energy difference between the solid and liquid phases is evaluated at a single state point by integrating along a pseudosupercritical transformation path that connects the two phases. Using this result, the solid and liquid free energy curves are referenced to a common point, allowing a single coexistence point to be determined. Finally, Gibbs-Duhem integration is used to determine the full coexistence curve. To evaluate its utility, this method is applied to the Lennard-Jones and NaCl systems. Results for solid-liquid coexistence agree with previous calculations for these systems. In addition, it is shown that the NaCl model does not correctly describe solid-liquid coexistence at high pressures. An analysis of the accuracy of the method indicates that the results are most sensitive to the transformation free energy calculation.