Nitrosation of amides involves a pseudopericyclic 1,3-sigmatropic rearrangement

Two possible pathways for the nitrosation of formamide and N-methyl formamide by nitrosonium ion (NO(+)) have been investigated at the B3LYP/6-31G(d,p) level. The key steps are pseudopericyclic 1,3-sigmatropic rearrangements to give the observed N-nitrosamides. The transition structures (8a and 8b) are close to planar on the amide moiety and have remarkably low barriers of only 6.6 and 4.8 kcal/mol from the lowest energy conformations of 6a and 6b, respectively. [reaction: see text]     

Self-assembly between silver(I) and di- and tri-2-pyridines with flexible spacer: formation of discrete metallocycle versus coordination polymer

The self-assembly of metallosupramolecules from reactions of flexible 2-pyridyl ligands and silver salts is described. When 1,3-bis(2-pyridyl)propane (L1), tris[(2-pyridyl)methyl]methane (L2), and 1,3-bis(2-pyridyl)-2-tolylpropane (L3) are used in combination with silver ions, novel discrete metallocyclic complexes are formed in crystals. Moreover, the self-assembly of 1,3-bis(2-pyridyl)-2-phenylpropane (L4) with silver nitrate yields a coordination polymer. The examination of its solution shows that this coordination polymer is formed via the solution-based discrete metallocyclic species.     

Effect of liquid chromatography separation of complex matrices on liquid chromatography-tandem mass spectrometry signal suppression

The effect of liquid chromatography separation on liquid chromatography-tandem mass spectrometry (LC-MS-MS) signal response for the characterization of low-molecular-mass compounds in a complex matrix was investigated. Matrix induced signal suppression appears throughout the entire LC-MS-MS analysis of wheat forage extract, with greatest suppression occurring at early retention times. Experimental results show that co-elution of matrix components and analytes from the LC column may be most strongly attributed to column overloading rather than similar analyte and matrix retention behavior. As a result, two-dimensional (LC-LC) separation can be a highly effective approach to address signal suppression effects for the quantitative LC-MS-MS analysis of complex matrix samples.     

QSAR models using a large diverse set of estrogens

Endocrine disruptors (EDs) have a variety of adverse effects in humans and animals. About 58,000 chemicals, most having little safety data, must be tested in a group of tiered assays. As assays will take years, it is important to develop rapid methods to help in priority setting. For application to large data sets, we have developed an integrated system that contains sequential four phases to predict the ability of chemicals to bind to the estrogen receptor (ER), a prevalent mechanism for estrogenic EDs. Here we report the results of evaluating two types of QSAR models for inclusion in phase III to quantitatively predict chemical binding to the ER. Our data set for the relative binding affinities (RBAs) to the ER consists of 130 chemicals covering a wide range of structural diversity and a 6 orders of magnitude spread of RBAs. CoMFA and HQSAR models were constructed and compared for performance. The CoMFA model had a r2 = 0.91 and a q2LOO = 0.66. HQSAR showed reduced performance compared to CoMFA with r2 = 0.76 and q2LOO = 0.59. A number of parameters were examined to improve the CoMFA model. Of these, a phenol indicator increased the q2LOO to 0.71. When up to 50% of the chemicals were left out in the leave-N-out cross-validation, the q2 remained significant. Finally, the models were tested by using two test sets; the q2pred for these were 0.71 and 0.62, a significant result which demonstrates the utility of the CoMFA model for predicting the RBAs of chemicals not included in the training set. If used in conjunction with phases I and II, which reduced the size of the data set dramatically by eliminating most inactive chemicals, the current CoMFA model (phase III) can be used to predict the RBA of chemicals with sufficient accuracy and to provide quantitative information for priority setting.     

Energetics of radical transfer in DNA photolyase

Charge separation and radical transfer in DNA photolyase from Escherichia coli is investigated by computing electrostatic free energies from a solution of the Poisson-Boltzmann equation. For the initial charge separation 450 meV are available. According to recent experiments [Aubert et al. Nature 2000, 405, 586-590] the flavin receives an electron from the proximal tryptophan W382, which consequently forms a cationic radical WH(*)(+)382. The radical state is subsequently transferred along the triad W382-W359-W306 of conserved tryptophans. The radical transfer to the intermediate tryptophan W359 is nearly isoenergetic (58 meV uphill); the radical transfer from the intermediate W359 to the distal W306 is 200 meV downhill in energy, funneling and stabilizing the radical state at W306. The resulting cationic radical WH(*)(+)306 is further stabilized by deprotonation, yielding the neutral radical W(*)306, which is 214 meV below WH(*)(+)306. The time scale of the charge recombination process yielding back the resting enzyme with FADH(*) is governed by reprotonation of W306, with a calculated lifetime of 1.2 ms that correlates well with the measured lifetime of 17 ms. In photolyase from Anacystis nidulans the radical state is partially transferred to a tyrosine [Aubert et al. Proc. Natl. Acad. Sci. U.S.A. 1999, 96, 5423-5427]. In photolyase from Escherichia coli, there is a tyrosine (Y464) close to the distal tryptophan W306 that could play this role. We show that this tyrosine cannot be involved in radical transfer, because the electron transfer from tyrosine to W306 is much too endergonic (750 meV) and a direct hydrogen transfer is likely too slow. Coupling of specific charge states of the tryptophan triad with protonation patterns of titratable residues of photolyase is small.     

Spectroscopic studies on inclusion properties of fullerenocalix[4]arene conjugates with metal ions

Metal-chelating properties-in the ground and excited states-of fullerenocalix[4]arenes containing two malonamide substituents at the upper rim and four alkyl ester chains at the lower rim have been studied by means of steady-state absorption, fluorescence spectroscopy, and time-resolved transient absorption spectra. In particular, the influence that Ag+ enforces on the fullerene electronic spectra is due to direct interactions between Ag+ and the surface of C60. The effects stemming from Na+, Mg2+, and Ba2+, on the other hand, are indirect and are introduced through chelating the metal ions to the calix[4]arene moiety. They strongly depend on the molecular structure of the fullerenocalix[4]arenes. No spectroscopic evidence was obtained for any influence caused by Mn2+, although the malonamide groups provide good chelating ability even for this transition metal ion.     

X-ray photoelectron spectroscopy and magnetic studies on the effect of pore size, wall thickness, and wall composition on superparamagnetic cobaltocene mesoporous Nb, Ta, and Ti composites

Recent results in our group demonstrated that mixed oxidation state mesoporous niobium oxide cobaltocene composites display superparamagnetism at certain composition ratios. This was the first report of superparamagnetism in nanoscale molecular ensembles. A series of mesoporous niobium oxide materials were synthesized in order to understand the role of pore size and thickness of the walls in the mesostructure on the magnetic properties. Mesoporous Ti oxide and Ta oxide composites were also synthesized in order to investigate the effect of changing the wall composition on the magnetic properties of this new series of materials. All samples were characterized by X-ray diffraction, nitrogen adsorption, ultraviolet spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and superconducting quantum interference device magnetometry. The results of this study showed that variation of wall thickness or pore size in the Nb system had little effect on the properties and that superparamagnetism most likely arises from mixed oxidation state cobaltocene grains residing in the individual pores and not from the free electrons in the mesostructure or much larger domains. The Langevin function was applied to the isothermal magnetic data from the Nb composites and gave mean superparamagnetic particle sizes of ca. 14 nm in each system. The Co(II) to Co(III) ratios in these materials were approximately 1:1. The Ti and Ta materials showed no sign of superparamagnetism and only very low levels of neutral cobaltocene in the pores. This suggests that a critical amount of cobaltocene is required to bring about superparamagnetic behavior.     

Off-resonance R(1rho) NMR studies of exchange dynamics in proteins with low spin-lock fields: an application to a Fyn SH3 domain

An (15)N NMR R(1rho) relaxation experiment is presented for the measurement of millisecond time scale exchange processes in proteins. On- and off-resonance R(1rho) relaxation profiles are recorded one residue at a time using a series of one-dimensional experiments in concert with selective Hartmann-Hahn polarization transfers. The experiment can be performed using low spin-lock field strengths (values as low as 25 Hz have been tested), with excellent alignment of magnetization along the effective field achieved. Additionally, suppression of the effects of cross-correlated relaxation between dipolar and chemical shift anisotropy interactions and (1)H-(15)N scalar coupled evolution is straightforward to implement, independent of the strength of the (15)N spin-locking field. The methodology is applied to study the folding of a G48M mutant of the Fyn SH3 domain that has been characterized previously by CPMG dispersion experiments. It is demonstrated through experiment that off-resonance R(1rho) data measured at a single magnetic field and one or more spin-lock field strengths, with amplitudes on the order of the rate of exchange, allow a complete characterization of a two-site exchange process. This is possible even in the case of slow exchange on the NMR time scale, where complementary approaches involving CPMG-based experiments fail. Advantages of this methodology in relation to other approaches are described.     

Application of time-resolved infrared spectroscopy to electronic structure in metal-to-ligand charge-transfer excited states

Infrared data in the nu(CO) region (1800-2150 cm(-1), in acetonitrile at 298 K) are reported for the ground (nu(gs)) and polypyridyl-based, metal-to-ligand charge-transfer (MLCT) excited (nu(es)) states of cis-[Os(pp)2(CO)(L)](n)(+) (pp = 1,10-phenanthroline (phen) or 2,2'-bipyridine (bpy); L = PPh3, CH(3)CN, pyridine, Cl, or H) and fac-[Re(pp)(CO)3(4-Etpy)](+) (pp = phen, bpy, 4,4'-(CH3)2bpy, 4,4'-(CH3O)2bpy, or 4,4'-(CO2Et)2bpy; 4-Etpy = 4-ethylpyridine). Systematic variations in nu(gs), nu(es), and Delta(nu) (Delta(nu) = nu(es) - nu(gs)) are observed with the excited-to-ground-state energy gap (E(0)) derived by a Franck-Condon analysis of emission spectra. These variations can be explained qualitatively by invoking a series of electronic interactions. Variations in dpi(M)-pi(CO) back-bonding are important in the ground state. In the excited state, the important interactions are (1) loss of back-bonding and sigma(M-CO) bond polarization, (2) pi(pp*-)-pi(CO) mixing, which provides the orbital basis for mixing pi(CO)- and pi(4,4'-X(2)bpy)-based MLCT excited states, and (3) dpi(M)-pi(pp) mixing, which provides the orbital basis for mixing pipi- and pi(4,4'-X(2)bpy*-)-based MLCT states. The results of density functional theory (DFT) calculations on the ground and excited states of fac-[Re(I)(bpy)(CO)3(4-Etpy)](+) provide assignments for the nu(CO) modes in the MLCT excited state. They also support the importance of pi(4,4'-X2bpy*-)-pi(CO) mixing, provide an explanation for the relative intensities of the A'(2) and A' ' excited-state bands, and provide an explanation for the large excited-to-ground-state nu(CO) shift for the A'(2) mode and its relative insensitivity to variations in X.     

Protein profiles and identification of high performance liquid chromatography isolated proteins of cancer cell lines using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has been used to rapidly profile the protein content of human cell lysates from MCF-10 cell and variant lines. The method was used to study the protein profiles of these cells as they progressed from normal breast epithelium to fully malignant cells. Distinct differences in the protein profiles were observed with progression, and specific proteins associated with carcinogenesis (p53, c-myc, and c-erbB-2) were heavily expressed in these cells as detected by MALDI-TOFMS. These proteins were also isolated using non-porous reversed-phase high performance liquid chromatography (NP-RP-HPLC) and mass analyzed by MALDI-TOFMS to provide molecular weight information without interference from other proteins in the whole cell lysates, and to avoid suppression effects in mixtures of proteins detected by MALDI-TOFMS. In order to confirm the identity of these oncoproteins, the cell lysates were subjected to one-dimensional (1-D) gel separation and subsequently electroblotted onto a poly(vinylidene difluoride) (PVDF) membrane for further analysis. Trypsin and cyanogen bromide digestions were performed on these proteins eluted from excised PVDF bands which were then analyzed by MALDI-TOFMS. The identity of these proteins was confirmed by database matching procedures.