Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

X波段同轴腔多注速调管的研究

开展了具有同轴谐振腔互作用电路和双模工作杆控电子枪的X波段同轴腔双模多注速调管的研究工作.结合数值计算和冷测实验,对工作于TM₃₁₀高次模的同轴谐振腔模式分布和特性参数进行研究,获得了可满足多注速调管要求的谐振腔特性阻抗和良好的模式稳定性.采用具有双控制极的新型杆控多注电子枪及电子光学系统,可使多注速调管具有双模的新工作特性,通过数值模拟获得了优化的几何参数和具有良好层流性和波动性的空心多电子注.对采用6个电子注和5个谐振腔的X波段多注速调管进行了注波互作用大信号计算,结果表明当电子注电压为21.5kV,脉冲电流为14.4A时,可在30MHz频带范围内获得的100kW左右的脉冲输出功率,互作用效率大于30%,增益大于36dB.     

非均匀周期采样多率系统的一种辨识方法

本文利用提升技术,推导了非均匀采样多率系统的提升状态空间模型.对于状态可测量的多率系统,利用最小二乘原理,给出了模型参数矩阵辨识方法;对于状态不可测的未知参数多率系统,利用递阶辨识原理,在考虑提升模型的因果约束下,将提升系统分解为子系统进行辨识,形成了状态空间模型递阶辨识方法.仿真例子表明,本文提出的递阶辨识方法是有效的.     

基于激光器RIN抑制的宽带低噪声微波光传输技术

微波光子链路中的核心器件激光器、调制器、光电探测器均为有源器件,在微波信号的电光光电转换过程中会引入额外的噪声,导致微波信号的噪声性能恶化,高的噪声系数会降低电子信息系统的灵敏度、动态范围、探测精度等关键性能指标,因此抑制噪声成为实现高性能微波光子系统的关键。文章针对当前激光器噪声较高的限制,提出采用常规分布反馈(DFB)激光器与光放大器、窄带光子滤波相组合的方式来抑制激光源噪声,实现微波光子链路的宽带低噪声。建立了微波光子链路传输模型,分析了链路性能与器件参数之间的映射关系。实测对比了采用该组合光源方案与常规微波光子链路的噪声性能,结果表明采用高功率光源结合光滤波可对激光器远端相对强度噪声(RIN)实现高的抑制,通过优化,噪声系数较常规水平可改善15 dB以上。     

含酯基和酰胺基支链的苯并菲液晶电荷传输性质的量子化学研究

根据Marcus半经典模型,计算了支链中含酰胺基和含酯基的苯并菲盘状液晶化合物C18H6(OC2H5)3(OCH2CONHCH3)3和C18H6(OC2H5)3(OCH2COOCH3)3的电荷转移反应的速率常数。这两种化合物的支链都可以对称性分布,也可以非对称性分布。计算表明,支链排列的对称性对电荷转移矩阵元和电荷传输速率常数的影响很大,非对称性分子的正电荷传输速率常数和负电荷传输速率常数均大于对称性分子。所以,取代基非对称性排列对增加电荷传输速率常数有利。其原因是支链非对称排列的分子的质量中心与几何中心不重合,当液晶分子绕质量中心旋转的同时形成了分子间的相对平移,从而增大了电荷转移矩阵元。本文为设计、改善液晶分子的电荷传输性能提供了一条新的思路。