聚甲基丙烯酸甲酯辐射裂解和消旋的空间立构效应

本文研究了三种不同空间立构聚甲基丙烯酸甲酯的辐射效应,提出裂解过程是一种裂解与重合的动态平衡过程。分子量降低和消旋作用对温度的依赖性,是由于分子运动和笼罩效应以及重合的空间位阻效应所致。辐照温度愈高,裂解产额愈大。相同条件下辐照,全同立构比无规立构试样的裂解产额更大。 全同立构聚甲基丙烯酸甲酯辐照后,不仅分子链断裂,而且空间立构也发生很大变化。随着辐照剂量的增加,全同立构含量逐渐减少,而无规立构含量和间同立构含量却逐渐增加。     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

弱耦合映射系统在周期窗口内的行为

通过解析讨论及数值计算的验证,发现弱耦合映射系统的周期窗口只存在于耦合强度极小的范围内(对于3周期窗口大约为10^-3),这个范围可以定义为周期窗口的深度。在周期窗口内耦合映射的行为可以通过讨论少数几个模(相对简单的耦合三映射,实质是一维映射)而确定。耦合映射的第一Lyapunov指数随耦合强度增大的变化曲线呈锯齿形状。 关键词：     

用Monte-Carlo方法研究八面沸石的脱铝过程

八面沸石中的骨架铝可按其环境次邻位上出现的铝数分为4类。环境无次邻铝的铝离子形成分子筛的强酸中心;周围有1至3个次邻铝的铝离子形成的酸中心酸性较弱,与前者相比易于从骨架上解脱。基于一级动力学近似,用Monte-Carlo方法模拟八面沸石脱铝过程,得到4种类型铝离子的数目随硅铝比改变而演化的规律。预计硅铝比在6.68附近,脱铝八面沸石中的强酸中心数目达到极大值;如果强、弱酸中心铝离子的解脱速率差别较大,则脱铝八面沸石中强酸中心浓度较高。 关键词：     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

X波段同轴腔多注速调管的研究

开展了具有同轴谐振腔互作用电路和双模工作杆控电子枪的X波段同轴腔双模多注速调管的研究工作.结合数值计算和冷测实验,对工作于TM₃₁₀高次模的同轴谐振腔模式分布和特性参数进行研究,获得了可满足多注速调管要求的谐振腔特性阻抗和良好的模式稳定性.采用具有双控制极的新型杆控多注电子枪及电子光学系统,可使多注速调管具有双模的新工作特性,通过数值模拟获得了优化的几何参数和具有良好层流性和波动性的空心多电子注.对采用6个电子注和5个谐振腔的X波段多注速调管进行了注波互作用大信号计算,结果表明当电子注电压为21.5kV,脉冲电流为14.4A时,可在30MHz频带范围内获得的100kW左右的脉冲输出功率,互作用效率大于30%,增益大于36dB.