V_2O_5/C催化氧化乙二醛制备乙醛酸

利用等体积浸渍法制备了V2O5/C催化剂,并应用于乙二醛的液相氧化反应,采用XRD、TEM手段对催化剂进行了物化性质表征.结果表明,V2O5/C对乙二醛的氧化表现出较高的催化活性和乙醛酸选择性,反应10h,乙二醛的转化率达29.2%,乙醛酸得率13.6%.与贵金属Pd-Bi/C催化剂相比,V2O5/C催化剂的稳定性和重复使用效果都比较好.     

Nitration Reaction Catalyzed by Horseradish Peroxidase in the Presence of H2O2 and NaNO2

The enzymatic nitration of phenol and m-cresol catalyzed by horseradish peroxidase was studied in the presence of H2O2 and NaNO2. The results showed that the nitration products of phenol were 2-nitro and 4-nitrophenols. There was also a small amount of by-products of hydroquinone and catechol. The influences of various reaction parameters, including pH, organic solvent type, and concentrations of NaNO2 and H2O2, on the nitration products were investigated. The yields of 4-nitrophenol and 2-nitrophenol were 14% and 12%, respectively. The nitration products of m-cresol were 4-nitro-m-cresol and 6-nitro-m-cresol, and the yields of 4-nitro-m-cresol and 6-nitro-m-cresol were 19% and 30%, respectively.     

锂离子二次电池电解质材料LiPF6的制备及表征

0引言 液态锂离子电池自1990年开发成功以来,由于具有比能量高、工作电压高、应用温度范围宽、自放电率低、循环寿命长、无污染、安全性能好等许多独特的优势[1],所以其发展前景十分广阔.目前液态锂离子二次电池中开发使用的无机阴离子导电盐主要有LiClO4、LiPF6、LiAsF6等,但LiClO4为强氧化剂,使用不安全而不宜用于电池,LiAsF6虽然性能颇佳,但有毒且价格较贵,故也不宜广泛使用.LiPF6被认为是目前较合适的电解质[1],但其制备困难,价格较贵,且目前报道的合成方法也多是以HF为介质[2～5].本文作者以PF5和LiF为原料在CH3CN溶剂中简单有效地合成了高纯LiPF6,并通过在手套箱中制样的方法对目标产物进行了红外、热重和X射线衍射分析,给出了LiPF6的红外光谱图、热重分析数据和X射线衍射图.     

丙烯酸酯和甲基丙烯酸酯基团转移共聚研究

研究了三种丙烯酸酯分别和四种甲基丙烯酸酯的基团转移共聚，用１Ｈ ＮＭＲ法测定共聚物组成，扩展的Ｋｅｌｅｎ Ｔｕｄｏｓ法测定竞聚率，结果为γＭＡ＝９２３、γＭＭＡ＝００６；γＥＡ＝１４１５、γＭＭＡ＝００１；γＢＡ＝７５１、γＭＭＡ＝００２；γＭＡ＝１４４１、γＥＭＡ＝００１；γＭＡ＝１３９６、γＢＭＡ＝０２３；γＭＡ＝８６６、γｉ ＢＭＡ＝００８，表明基团转移聚合同阴离子聚合有明显的相似之处．     

东太平洋深海锰结核的化学元素研究

用ICP-AES法测定了东太平洋深海锰结核样品中二十多种主，次及微量元素，结果表明，表面瘤状和表面光滑两种类型锰结核的化学元素含量有较明显的区别，如表面光滑的锰结核TiO2含较高，而表面瘤状的锰结核Mn/Fe之值较高等。     

Tuning the band gap of the CIGS solar buffer layer Cd1-xZnxS (x=0—1) to achieve high efficiency

To evaluate the impact of zinc sulfate (ZnSO4) concentration on the structural properties of the films, Cd1-xZnxS thin films were formed on glass substrates using chemical bath deposition (CBD) in this study. The effect of ZnSO4 precursor concentration on the surface morphology, optical properties, and morphological structure of the Cd1-xZnxS films was investigated. To study the impact of zinc doping content on the performance metrics of Cu(In1-xGax)Se2 (CIGS) cells in the experimental group and to improve the buffer layer thickness, simulations were run using one-dimensional solar cell capacitance simulator (SCAPS-1D) software.     

PLC-RF无线传输网络中的能效最优设计方法

针对电力线通信（PLC）和射频（RF）无线通信混合传输的室内通信场景,提出了一种基于角度信息的信道状态信息（AI-CSI）的能效优先传输方案。首先,Wi-Fi无线网络和PLC网络分别作为主网络和次级网络,并且采用认知无线电技术来提高频谱效率的情况下,建立次级网络总能效最大化为目标函数的优化问题。其次,为了求解该问题,通过基于AI-CSI的迫零波束成形方法,获得波束成形权矢量,并进一步提出Dinkelbach与拉格朗日乘子法相结合的优化方法,进行最优的功率分配。最后,计算机仿真结果不仅验证了所提方案的有效性和优越性,而且分析了中继天线数和用户个数等典型参数对系统能效带来的影响,从而为实际系统设计提供了参考和依据。     

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

LiNi0.8Co0.1Mn0.1O2 cathode material is prepared by sol-gel method and the effects of Nb5+ doping and different calcination temperatures on cathode materials were deeply investigated. Structural and morphological characterizations revealed that the optimal content of 1 mol% Nb5+ can stabilize layered structures, mitigate Ni2+ migration to Li layers, improve lithium diffusion capacity, and reduce lattice expansion/shrinkage while cycling. And calcination temperature at 800 °C can not only ensure good morphology, but also suppress the mixed discharge of lithium and nickel in the internal structure. Electrochemical performance evaluation revealed that Nb5+ doping improves the discharge-specific capacity of the material, which is conducive to ameliorating its rate capability and cycle performance. And the material at 800 °C exhibits the highest discharge specific capacity, the best magnification performance, low polarizability, and the best cycle reversibility.     

InPBi薄膜材料的结构性能和光学性能研究

室温下,InPBi表现出强而宽的光致发光光谱,其宽光谱特性来自于材料中的PIn反位深能级和与Bi相关的深能级。该特性使得InPBi有希望应用于制备光学相干层析扫描系统中的超辐射光源。文章利用透射电子显微镜和三维原子探针研究了InPBi薄膜材料的结构性能,发现Bi原子在InPBi薄膜中的分布极不均匀,在InPBi/InP界面出现了Bi的富集区,从该区域沿[001]方向出现了Bi的纳米面,此纳米面位于(110)平面上。这种Bi原子的富集分布阻碍了PIn反位参与的载流子复合过程,对InPBi的光学性能有显著的影响。研究结果可为制造光学相干层析扫描系统的超辐射发光二极管提供一定的理论基础。     

LD泵浦Pr∶YLF固体激光器

研究了LD泵浦Pr∶YLF固体激光器。激光器采用LD端面泵浦结构,通过建立激光器热效应模型,对激光晶体内部温度场进行了解析计算,模拟分析了不同掺杂浓度Pr∶YLF晶体的光吸收以及温度场分布,对激光器泵浦耦合系统和输出镜的透射率等参数进行了优化设计,实现了LD泵浦Pr∶YLF固体激光器的高功率、高效率输出。当LD泵浦功率为2W时,获得了最大输出功率为287mW,光光转换效率达16.1,光束质量因子为M2X=1.38,M2Y=1.35的640nm激光。