The solution of a convection–diffusion–reaction equation arising from cathodic reduction in a pulsating crack

This paper derives the convection–diffusion-reaction equation governing the reaction between the dissolved oxygen in sea-water and the steel walls of a pulsating crack. By the neglect of the diffusion term it is shown that an exact solution of the convection-reaction equation can be obtained. A numerical method for the solution of the complete convection–diffusion-reaction equation is derived by the use of finite differences. The numerical computation of the initial transient and the final periodic steady-state values is also discussed.     

Colour in flat-panel CRTs

Picture-on-the-wall television has long been a dream of display engineers throughout the world. This vision, combined with the enormous growth in applications for electronic displays over recent years, has resulted in major efforts aimed at achieving a cathode-ray tube design which is both flat and thin. Moreover, there is evidence of increasing activity in this field, in spite of the many advances being made with other flat-panel display technologies. The author provides an introduction to the wide range of flat-panel CRT designs, and describes some of the leading approaches to the achievement of colour in these displays. Some photographic results are also included     

Constriction resistance at high signal frequencies

This paper describes the dependence of constriction resistance on signal frequency. This dependence was calculated for circular constrictions ranging in diameter from 10 to 100 /spl mu/m, and for frequencies ranging from dc to 1 GHz. The results indicate that the magnitude of constriction resistance does not deviate appreciably from values predicted by Holm's classical analytical expression, as long as the skin depth is large compared with the constriction radius. For skin depths that are much smaller than the constriction radius, constriction resistance decreases with increasing frequency to an apparent limiting value independent of the constriction radius. At high frequencies, constriction resistance constitutes only one of two components of the total connection resistance measured in practice. The second component of connection resistance is determined by details of the geometry and dimensions of the contact interface, and increases with signal frequency.     

Molecular orbital momentum distributions and binding energies for nitric oxide

Binding energy spectra of the valence electrons of the open shell molecule NO have been obtained up to 55 eV at azimuthal angles of 0° and 7° using binary (e, 2e) spectroscopy at an impact energy of 1200 eV. The momentum distribution has been obtained for the least tightly bound (unpaired) electron, removal of which leads to formation of the X ¹Σ⁺ ground state of NO⁺. Momentum distributions have also been measured at 21.0 and 40.5 eV. The measured momentum distributions are compared with several literature wavefunctions of varying complexity. They are found to be in excellent agreement with those calculated using the natural spin orbital wavefunctions of Kouba and Ohrn.     

A Proposed Receiver Structure for Optical Communication Systems that Employ Heterodyne Detection and a Semiconductor Laser as a Local Oscillator

Coherent heterodyne detection in optical communication is degraded by phase instabilities present when a semiconductor laser is used as a local oscillator. Postdetection processing that accounts for these instabilities is suggested, based on a diffusion-process model for oscillator instabilities and a maximum-likelihood sequence-estimator of information symbols modulating the received light.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

圆形区域内香枞芽虫的分布模型

本文讨论圆形区域内芽虫分布模型,特别研究了芽虫与天敌接触时产生与避免outbreak状态的可能性。     

Observation of hydrogen induced intermediate borides in PrFeB based alloys by Mössbauer effect spectroscopy

In the present work, a quantitative analysis of the phase compositions by Mössbauer effect spectroscopy of solid and conventional hydrogen disproportionated Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys was carried out. Significant amounts of intermediate borides t-Fe₃B and Pr(Fe, Co)₁₂B₆ were detected after solid hydrogen disproportionation treatment in Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys, respectively. After conventional hydrogenation–disproportionation–desorption–recombination treatment these phases were not detected and in no case residual Pr₂Fe₁₄B-phase was found. It was observed that the amount of intermediate borides after disproportionation can be correlated with the degree of texture after recombination at various temperatures.