A low-resistance self-aligned T-shaped gate for high-performancesub-0.1-μm CMOS

This paper describes the high performance of T-shaped-gate CMOS devices with effective channel lengths in the sub-0.1-μm region. These devices were fabricated by using selective W growth, which allows low-resistance gates smaller than 0.1 μm to be made without requiring fine lithography alignment. We used counter-doping to scale down the threshold voltage while still maintaining acceptable short-channel effects. This approach allowed us to make ring oscillators with a gate-delay time as short as 21 ps at 2 V with a gate length of 0.15 μm. Furthermore, we experimentally show that the high circuit speed of a sub-0.1-μm gate length CMOS device is mainly due to the PMOS device performance, especially in terms of its drivability     

Quick estimation of rare events in stochastic networks

This paper presents a method for fast estimation of probabilities of rare events in stochastic networks, with a particular emphasis on coherent reliability systems. The method is based on the concepts of likelihood-ratios (LR), change of probability measure and the bottleneck-cut in the network. Both polynomial and exponential-time Monte Carlo estimators are defined, and conditions under which the time complexity of the proposed LR estimators is bounded by a polynomial are discussed. The accuracy of the method depends only on the size (cardinality) of the bottleneck-cut, not on the topology and actual size of the network. Supporting numerical results are presented, with the cardinality of the bottleneck-cut ⩽20     

`Minting' electronic cash

Electronic equivalents of traditional cash payment systems are being launched worldwide. Electronic cash can combine the benefits of traditional cash with those of payment by debit and credit card, while circumventing both their shortcomings. As with traditional cash, electronic cash should have high acceptability and be suitable for low value payment from person to person. With the possible exception of online payment platforms such as the Internet, it is preferred that payments be verifiable offline, without the bank's involvement, for reasons of cost effectiveness and speed. To facilitate electronic cash payments over the phone and the Internet, physical proximity of payer and payee should not be necessary. Moreover, electronic cash should offer privacy of payments. In particular, payments by an honest payer should be untraceable, and information about transaction content should remain privy to payer and payee. Yet a payer ought to always be able to trace the payee; traceability suits electronic cash and is as open to extortion, money laundering, and bribery as a check or wire transfer. Lastly, as with payments by debit and credit card, electronic cash should be convenient to store and transport, while protecting users against loss, theft, and accidental destruction     

Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Estimating local mean signal strength of indoor multipathpropagation

We explore techniques for the measurement of local mean signal strength at 900 MHz and 2 GHz. In particular, we characterize the impact of transmitter and receiver antenna rotation on the estimated local mean. Then, we explore the collection of high resolution data while moving along a linear trajectory and using linear averaging techniques to estimate the local mean. With this information, the best measurement techniques can be chosen depending on the required speed versus accuracy tradeoff. Finally, we use a ray tracing propagation model to evaluate different methods of calculating the local mean signal strength for indoor environments     

Temperature and frequency dependence of the spin-lattice relaxation times of E′1 centers in neutron-irradiated quartz glass

Results are reported for measurements of the spin-lattice relaxation times of E′₁ centers in quartz glass, produced by neutron irradiation, with the measurements made at two frequencies 9.25 and 24.0 GHz over a wide temperature interval 1.5–300 K. The experimental data are interpreted on the basis of interaction mechanisms of the spins with two-level systems with excitation energies ∼6, ∼26, and ∼420 cm⁻¹. A small modification of the existing theory allows us to explain a number of features of the observed temperature and frequency dependence of the relaxation rate. The results are compared with the data available in the literature on spin-lattice relaxation of irradiation centers in crystalline quartz and quartz glass. Fiz. Tverd. Tela (St. Petersburg) 39, 1335–1337 (August 1997)     

A poincaré-bendixson theorem for analytic families of vector fields

We provide a characterization of the limit periodic sets for analytic families of vector fields under the hypothesis that the first jet is non-vanishing at any singular point. Also, applying the family desingularization method, we reduce the complexity of some of these sets.     

Experimental studies of microwave amplification in the ion-focusedregime

Studies of microwave amplification with an in-focused electron beam drawn from an induction injector are reported. A free-electron laser (FEL) operating at 9.4 GHz and employing ion-focusing within the interaction region has achieved power in excess of 30 MW at 9.4 GHz, with a beam energy of 0.8 MeV and current of 0.7 kA. Peak gain is 20 dB/m, with no saturation after 15 wiggler periods. Also reported are the first evolution and detuning data for an ion-channel laser/maser (ICL). Two shortcomings of the prematurely halted ICL studies are poor frequency discrimination and a large axial plasma gradient. Prospects for operation with an upgraded 1.6 MeV accelerator are discussed