Rapid Identification for the Pterocarpus Bracelet by Three-Step Infrared Spectrum Method

In order to explore a rapid identification method for the anti-counterfeit of commercial high value collections, a three-step infrared spectrum method was used for the pterocarpus collection identification to confirm whether a commercial pterocarpus bracelet (PB) was made from the precious species of Pterocarpus santalinus (P. santalinus). In the first step, undertaken by Fourier transform infrared spectroscopy (FTIR) spectrum, the absorption peaks intensity of PB was slightly higher than that of P. santalinus only at 1594 cm⁻¹, 1205 cm⁻¹, 1155 cm⁻¹ and 836 cm⁻¹. In the next step of second derivative IR spectra (SDIR), the FTIR features of the tested samples were further amplified, and the peaks at 1600 cm⁻¹, 1171 cm⁻¹ and 1152 cm⁻¹ become clearly defined in PB. Finally, by means of two-dimensional correlation infrared (2DIR) spectrum, it revealed that the response of holocellulose to thermal perturbation was stronger in P. santalinus than that in PB mainly at 977 cm⁻¹, 1008 cm⁻¹, 1100 cm⁻¹, 1057 cm⁻¹, 1190 cm⁻¹ and 1214 cm⁻¹, while the aromatic functional groups of PB were much more sensitive to the thermal perturbation than those of P. santalinus mainly at 1456 cm⁻¹, 1467 cm⁻¹, 1518 cm⁻¹, 1558 cm⁻¹, 1576 cm⁻¹ and 1605 cm⁻¹. In addition, fluorescence microscopy was used to verify the effectiveness of the above method for wood identification and the results showed good consistency. This study demonstrated that the three-step IR method could provide a rapid and effective way for the anti-counterfeit of pterocarpus collections.     

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide

Soluble sulfur (S₈) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS₂) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS₂) and S₈, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS₂ solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.     

Electrochemical Immunoassay for Tumor Marker CA19-9 Detection Based on Self-Assembled Monolayer

A CA19-9 electrochemical immunosensor was constructed using a hybrid self-assembled membrane modified with a gold electrode and applied to detect real samples. Hybrid self-assembled membranes were selected for electrode modification and used to detect antigens. First, the pretreated working electrodes were placed in a 3-mercaptopropionic acid (MPA)/β-mercaptoethanol (ME) mixture for 24 h for self-assembly. The electrodes were then placed in an EDC/NHS mixture for 1 h. Layer modification was performed by stepwise dropwise addition of CA19-9 antibody, BSA, and antigen. Differential pulse voltammetry was used to characterize this immunosensor preparation process. The assembled electrochemical immunosensor enables linear detection in the concentration range of 0.05–500 U/mL of CA19-9, and the detection limit was calculated as 0.01 U/mL. The results of the specificity measurement test showed that the signal change of the interfering substance was much lower than the response value of the detected antigen, indicating that the sensor has good specificity and strong anti-interference ability. The repeatability test results showed that the relative standard deviations were less than 5%, showing good accuracy and precision. The CA19-9 electrochemical immunosensor was used for the actual sample detection, and the experimental results of the standard serum addition method showed that the RSD values of the test concentrations were all less than 10%. The recoveries were 102.4–115.0%, indicating that the assay has high precision, good accuracy, and high potential application value.     

First Organic–Inorganic Hybrid Compounds Formed by Ge-V-O Clusters and Transition Metal Complexes of Aromatic Organic Ligands

Three compounds based on Ge-V-O clusters were hydrothermally synthesized and characterized by IR, UV-Vis, XRD, ESR, elemental analysis and X-ray crystal structural analysis. Both [Cd(phen)(en)]₂[Cd₂(phen)₂V₁₂O₄₀Ge₈(OH)₈(H₂O)]∙12.5H₂O (1) and [Cd(DETA)]₂[Cd(DETA)₂]_0.5[Cd₂(phen)₂V₁₂O₄₁Ge₈(OH)₇(0.5H₂O)]∙7.5H₂O (2) (1,10-phen = 1,10-phenanthroline, en = ethylenediamine, DETA = diethylenetriamine) are the first Ge-V-O cluster compounds containing aromatic organic ligands. Compound 1 is the first dimer of Ge-V-O clusters, which is linked by a double bridge of two [Cd(phen)(en)]²⁺. Compound 2 exhibits an unprecedented 1-D chain structure formed by Ge-V-O clusters and [Cd₂(DETA)₂]⁴⁺ transition metal complexes (TMCs). [Cd(en)₃]{[Cd(η₂-en)₂]₃[Cd(η₂-en)(η₂-μ₂-en)(η₂-en)Cd][Ge₆V₁₅O₄₈(H₂O)]}∙5.5H₂O (3) is a novel 3-D structure which is constructed from [Ge₆V₁₅O₄₈(H₂O)]¹²⁻ and four different types of TMCs. We also synthesized [Zn₂(enMe)₃][Zn(enMe)]₂[Zn(enMe)₂(H₂O)]₂[Ge₆V₁₅O₄₈(H₂O)]∙3H₂O (4) and [Cd(en)₂]₂{H₈[Cd(en)]₂Ge₈V₁₂O₄₈(H₂O)}∙6H₂O (5) (enMe = 1,2-propanediamine), which have been reported previously. In addition, the catalytic properties of these five compounds for styrene epoxidation have been assessed.     

The Influence of Tyrosol-Enriched Rhodiola sachalinensis Extracts Bioconverted by the Mycelium of Bovista plumbe on Scopolamine-Induced Cognitive,Behavioral, and Physiological Responses in Mice

Alzheimer’s disease (AD) is an age-related neurodegenerative disorder characterized by cognitive deficits, which are accompanied by memory loss and cognitive disruption. Rhodiola sachalinensis (RSE) is a medicinal plant that has been used in northeastern Asia for various pharmacological activities. We attempted to carry out the bioconversion of RSE (Bio-RSE) using the mycelium of Bovista plumbe to obtain tyrosol-enriched Bio-RSE. The objective of this study was to investigate the effects of Bio-RSE on the activation of the cholinergic system and the inhibition of oxidative stress in mice with scopolamine (Sco)-induced memory impairment. Sco (1 mg/kg body weight, i.p.) impaired the mice’s performance on the Y-maze test, passive avoidance test, and water maze test. However, the number of abnormal behaviors was reduced in the groups supplemented with Bio-RSE. Bio-RSE treatment improved working memory and avoidance times against electronic shock, increased step-through latency, and reduced the time to reach the escape zone in the water maze test. Bio-RSE dramatically improved the cholinergic system by decreasing acetylcholinesterase activity and regulated oxidative stress by increasing antioxidant enzymes (superoxide dismutase (SOD) and catalase (CAT)). The reduction in nuclear factor erythroid 2-related factor 2 (Nrf2)/heme oxygenase-1 (HO-1) signaling in the brain tissue due to scopolamine was restored by the administration of Bio-RSE. Bio-RSE also significantly decreased amyloid-beta 1–42 (Aβ1–42) and amyloid precursor protein (APP) expression. Moreover, the increased malondialdehyde (MDA) level and low total antioxidant capacity in Sco-treated mouse brains were reversed by Bio-RSE, and an increase in Nrf2 and HO-1 was also observed. In conclusion, Bio-RSE protected against Sco-induced cognitive impairment by activating Nrf2/HO-1 signaling and may be developed as a potential beneficial material for AD.     

An electrically conductive metallocycle: densely packed molecular hexagons with π-stacked radicals

Electrical conduction among metallocycles has been unexplored because of the difficulty in creating electronic transport pathways. In this work, we present an electrocrystallization strategy for synthesizing an intrinsically electron-conductive metallocycle, [Ni₆(NDI-Hpz)₆(dma)₁₂(NO₃)₆]·5DMA·nH₂O (PMC-hexagon) (NDI-Hpz = N,N′-di(1H-pyrazol-4-yl)-1,4,5,8-naphthalenetetracarboxdiimide). The hexagonal metallocycle units are assembled into a densely packed ABCABC… sequence (like the fcc geometry) to construct one-dimensional (1D) helical π-stacked columns and 1D pore channels, which were maintained under the liberation of H₂O molecules. The NDI cores were partially reduced to form radicals as charge carriers, resulting in a room-temperature conductivity of (1.2–2.1) × 10⁻⁴ S cm⁻¹ (pressed pellet), which is superior to that of most NDI-based conductors including metal–organic frameworks and organic crystals. These findings open up the use of metallocycles as building blocks for fabricating conductive porous molecular materials.

Intrinsically electron-conductive metallocycle was synthesized. π-Radicals play a key role in constructing π-stacked columns among molecular hexagons and achieving high electrical conductivity over 10⁻⁴ S cm⁻¹ in polycrystalline pellet.     

Rapid Detection of Five Estrogens Added Illegally to Dietary Supplements by Combining TLC with Raman Imaging Microscope

Estrogens added illegally to dietary supplements are hazardous to human health. Traditional detection and analysis methods have many limitations, and we have developed an assay that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). The five estrogens (estrone, estradiol, estriol, ethinyl estradiol, and diethylstilbestrol) were initially separated by TLC, then detected by area scanning Raman imaging with a 532 nm laser under a microscope. Raman spectra were obtained for each estrogen, which were used for detecting estrogen illegally added to botanical dietary supplements. The LOD of each estrogen was 0.4, 1.0, 0.8, 0.2, and 0.2 mg/mL, respectively. The matrix in the real sample did not interfere with the detection of estrogens. The method was fast, sensitive, stable, specific, and reliable.     

Impact of the Acetaldehyde-Mediated Condensation on the Phenolic Composition and Antioxidant Activity of Vitis vinifera L. Cv. Merlot Wine

Acetaldehyde is a critical reactant on modifying the phenolic profile during red wine aging, suggesting that the acetaldehyde-mediated condensation can be responsible for the variation of antioxidant activity during the aging of this beverage. The present study employs exogenous acetaldehyde at six levels of treatment (7.86 ± 0.10–259.02 ± 4.95 mg/L) before the bottle aging of Merlot wines to encourage phenolic modification. Acetaldehyde and antioxidant activity of wine were evaluated at 0, 15, 30, 45, 60 and 75 days of storage, while monomeric and polymeric phenolics were analyzed at 0, 30 and 75 days of storage. The loss of acetaldehyde was fitted to a first-order reaction model, the rate constant (k) demonstrated that different chemical reaction happened in wines containing a different initial acetaldehyde. The disappearance of monomeric phenolics and the formation of polymeric phenolics induced by acetaldehyde could be divided into two phases, the antioxidant activity of wine did not alter significantly in the first phase, although most monomeric phenolics vanished, but the second phase would dramatically reduce the antioxidant activity of wine. Furthermore, a higher level of acetaldehyde could shorten the reaction time of the first phase. These results indicate that careful vinification handling aiming at controlling the acetaldehyde allows one to maintain prolonged biological activity during wine aging.     

Ag/CNT‐catalyzed hydroamination of activated alkynes with aromatic amines

As a nanoparticle support material, carbon nanotubes (CNTs) provide a certain potential activation of catalysis in heterogeneous catalytic organic reactions. Herein, an efficient Ag/CNT‐catalyzed synthesis of enamines via hydroamination of activated alkynes with aromatic amines has been described. This catalyst still retains catalytic activity after being recycled and reused three times. In addition, it represents a green and environmentally friendly process for preparation of enamines. Copyright © 2013 John Wiley & Sons, Ltd.     

Approach for the Direct Synthesis of β-Dichlorosubstituted Acetanilides Using Iodine Trichloride (ICl3) as the Oxidant and Catalyst

A reliable method for direct synthesis of β‐dichlorosubstituted acetanilides is reported. The key transformation involves the oxidative and catalytic cleavage of a carbon‐carbon bond in the presence of iodine trichloride (ICl₃). In this protocol ICl₃ is used not only as the catalyst but also as the oxidant which widely broadens the scope of its application in organic synthetic chemistry.