Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.     

Electrochemical control of CO/NO ligand exchange in a triruthenium cluster monolayer assembled on a gold electrode surface

A highly selective ligand exchange reaction is realized in the self-assembled monolayer (SAM) of a triruthenium cluster on a gold electrode surface under precise electrochemical potential control. CO as well as NO molecules, which are known to play key roles in many chemical, biological, and environmental systems, can be efficiently introduced into the SAM by electrochemically tuning the electronic state of the Ru site. These unique surface reactions are more convenient and efficient than conventional ligand exchange reactions in solution and could be used for the elucidation of the electron-transfer mechanism in a biological system as well as in the development of molecular sensors and devices.     

含胺基功能性单体的聚合研究 Ⅴ.4-N,N-二甲胺基苯乙烯的合成及其作为氧化还原引发体系组分的研究

<正> 前文我们报告了含有芳香叔胺基的丙烯酸酯、甲基丙烯酸-4-N,N-二甲氨基苄酯(DMABMA)在过氧化二月桂酰(LPO)引发下的聚合动力学。从所得的聚合速度方程式及低的聚合活化能,认为DMABMA与LPO形成氧化还原体系而使DMABMA聚合,在本文第Ⅳ报中报道了DMABMA不仅能引发甲基丙烯酸甲酯的聚合,还参与聚甲基丙烯酸甲酯的链中,因此称这种既能参与引发聚合反应,又参与聚合物链中的引发“引发剂单体(initiatomer)”。这种含有可聚合胺引发体系的优点是,用于丙烯酸酯类医用     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。     

聚丙烯腈高分子半导体纤维的研究——聚丙烯腈高分子半导纤维的制备及其半导体特性

经四氯化锡处理的聚丙烯腈纤维,在进一步热处理过程中可以成为一种高分子半导纤维。它具有如下四个特点:1.纤维电阻率在10~3—10~(12)欧姆·厘米范围内可以控制热处理温度而随意调节。2.水解处理干燥后纤维的电阻值基本不变。3.有足够的机械强度可以进行多种形式的加工。4.纤维的电阻-温度、电导率-频率依赖关系,直流伏-安特性的试验结果表明它具有有机半导体特性,是一种兼有良好电性能和力学性能的高分子半导纤维。     

Surprisingly efficient catalytic Cr-mediated coupling reactions

[reaction: see text] With use of 1 mol % of Cr catalyst 5, surprisingly efficient Cr-mediated couplings of aldehydes with various types of nucleophiles have been realized. The catalyst set of Cr catalyst 5 and Ni catalyst 4 is used for alkenylation, alkynylation, and arylation, whereas the catalyst set of Cr catalyst 5 and CoPc (cobalt phthalocyanine) is used for 2-haloallylation, alkylation, and propargylation. Only the Cr catalyst 5 is required for allylation. The reaction rates in DME and THF have been found significantly faster than that in MeCN.     

模板组装Fe纳米线阵列及其微结构

铝在硫酸溶液中经直流阳极氧化,得到多孔铝阳极氧化膜(AAO). 以AAO膜为模板,通过交流电沉积的方法,在AAO模板孔内成功组装了Fe纳米线.TEM分析表明,Fe纳米线的长度约为2.5 μm,其长度分布十分均匀；粗细均匀,直径约为25 nm. XRD实验分析证实,所制备的Fe纳米线为α-Fe.选区电子衍射（SAED）实验分析表明,α-Fe纳米线具有单晶结构.     

无亲水基团取代的四苯基卟吩类LB膜的制备与表征

拉制了4种无亲水基团的四苯基卟吩LB膜,用透射电镜、荧光寿命、荧光光谱和紫外-可见光谱测量表征了膜的形貌和结构,发现膜中卟吩主要以聚集体形式存在。     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。