Photoemission of polarized electrons from InAlGaAs/GaAs superlattices with minimum conduction band offsets

Photoemission of polarized electrons from heterostructures based on InAlGaAs/GaAs superlattices with minimum conduction-band offsets is investigated. The comparison of the excitation energy dependence of the photoemission polarization degree with the calculated spectra make it possible to determine the polarization losses at different stages of the photoemission. A maximum polarization of P = 91% and a quantum yield of 0.14% are close to the best results obtained for photocathodes on the basis of strained semiconductor superlattices.     

Detecting and characterising returns in a pulsed ladar system

A new multi-spectral laser radar (ladar) system based on the time-correlated single photon counting, time-of-flight technique has been designed to detect and characterise distributed targets at ranges of several kilometres. The system uses six separated laser channels in the visible and near infrared part of the electromagnetic spectrum. The authors present a method to detect the numbers, positions, heights and shape parameters of returns from this system, used for range profiling and target classification. The algorithm has two principal stages: non-parametric bump hunting based on an analysis of the smoothed derivatives of the photon count histogram in scale space, and maximum likelihood estimation using Poisson statistics. The approach is demonstrated on simulated and real data from a multi-spectral ladar system, showing that the return parameters can be estimated to a high degree of accuracy.     

A military perspective on small unmanned aerial vehicles

In recent years, advancements in three technology areas, microelectronics, MEMS sensors, and GPS receivers, have allowed small UAVs to overcome critical deficiencies and become practical for insertion into the military mainstream. The maturation and commercialization of these technologies have resulted in readily available components that have decreased in both size and cost, to the point where truly low-cost, highly capable, small UAVs are possible. In particular, inertial devices such as MEMS accelerometers and angular rate sensors, pressure sensors, and magnetometers have reached the point where they are reliable, accurate, and affordable. These devices allow the determination of vehicle state with the precision required to enable autonomous flight. In addition, advanced microelectronic devices, such as digital signal processors, field programmable gate arrays, and microcontrollers have enabled sophisticated flight control functions, including fully autonomous flight using GPS waypoints. In combination, these advances have allowed small UAVs such as Pointer, Raven, and Dragon Eye to move into full-scale production and continue to allow the progression of UAVs into smaller and smaller packages. To address several of the deployment issues connected with small UAVs, a gun-launched version, along with the underpinning technologies, is under development. This device represents a clear departure from conventional UAVs with several clear advantages; however, it also contains severe design challenges, as well as test and evaluation dilemmas. An option of this type is envisioned not as a replacement for conventional small UAVs but rather as an augmenting capability.     

Intercarrier bandwidth exchange: an engineering framework

A mismatch between demand and supply for bandwidth is common in transport carrier networks. This mismatch is generally a result of the disparity between a carrier's capacity buildout and its anticipated customer demand. A carrier with temporary bandwidth deficit or lack of presence in a geographical region and a carrier with surplus capacity in the right locations can be brought together by the emerging bandwidth exchange technology. Bandwidth exchange offers a win-win solution, in which the carrier with a deficit avoids losing revenue by buying capacity from the carrier with surplus, and the latter makes additional revenue by retail sale of its excess capacity. While the concept of real-time purchase and exchange of bandwidth has attracted a lot of attention, many technical challenges stand in the way of making it a reality. The purpose of this article is to provide an engineering framework for enabling real-time bandwidth exchange with committed quality of service and service level agreement among transport carriers. Special emphasis is given to identifying the architectural requirements and the enabling infrastructure necessary for building a viable bandwidth exchange that can be used for creating revenue out of surplus stranded capacity. Indepth analysis of cross-carrier service level agreement specification, capacity publication, route design, and service provisioning are also provided in the article.     

Analytical multipoint moment matching reduction of distributed thermal networks

In this paper, the multipoint moment matching method for model order reduction of discretized linear thermal networks is extended to distributed linear thermal networks. As a result, from the analytical canonical forms of distributed linear thermal networks, reduced thermal networks are derived analytically. This direct construction of the reduced network, from the exact analytical solutions, avoids the inevitable inaccuracies inherent in conventional surface and volume meshing. It allows nearly exact reduced thermal network construction by domain decomposition for arbitrarily complicated structures.     

Injection-seeded Q-switched fiber ring laser

We present a narrow linewidth, injection-seeded Q-switched Er fiber ring oscillator, that provides over 600 /spl mu/W of average output power at 500 Hz, with 1.2 /spl mu/J per pulse, before the output appears to be significantly affected by stimulated Brillouin scattering. This laser configuration provides multiple advantages in LIDAR systems because it offers the possibility of broad and rapid tunability.     

A 0.18-/spl mu/m SiGe BiCMOS receiver and transmitter chipset for SONET OC-768 transmission systems

A 43-Gb/s receiver (Rx) and transmitter (Tx) chip set for SONET OC-768 transmission systems is reported. Both ICs are implemented in a 0.18-/spl mu/m SiGe BiCMOS technology featuring 120-GHz f/sub T/ and 100 GHz f/sub max/. The Rx includes a limiting amplifier, a half-rate clock and data recovery unit, a 1:4 demultiplexer, a frequency acquisition aid, and a frequency lock detector. Input sensitivity for a bit-error rate less than 10/sup -9/ is 40 mV and jitter generation better than 230 fs rms. The IC dissipates 2.4 W from a -3.6-V supply voltage. The Tx integrates a half-rate clock multiplier unit with a 4:1 multiplexer. Measured clock jitter generation is better than 170 fs rms. The IC consumes 2.3 W from a -3.6-V supply voltage.     

Bandwidth of reflectarrays

It is shown that the dominant factor controlling reflectarray bandwidth is the bandwidth of the radiating element, and that the effect of non-constant path delays over the surface of the flat reflector has little significance unless the aperture is electrically very large and the f/D ratio is small. An example of a polarisation-twist reflectarray using aperture coupled elements with time delay lines is used to demonstrate this conclusion.     

Extending orthogonal block codes with partial feedback

During the last few years a number of space-time block codes have been proposed for use in multiple transmit antennas systems. We propose a method to extend any space-time code constructed for m transmit antennas to m p transmit antennas through group-coherent codes (GCCs). GCCs make use of very limited feedback from the receiver (as low as 1 bit). In particular the scheme can be used to extend any orthogonal code (e.g., Alamouti code) to more than two antennas while preserving low decoding complexity, full diversity benefits, and full data rate.     

Approximate inverse computation using Frobenius inner product

Parallel preconditioners are presented for the solution of general linear systems of equations. The computation of these preconditioners is achieved by orthogonal projections related to the Frobenius inner product. So, min_M∈??∥AM?I∥ _F and matrix M₀∈?? corresponding to this minimum (?? being any vectorial subspace of ??_n(?)) are explicitly computed using accumulative formulae in order to reduce computational cost when subspace ?? is extended to another one containing it. Every step, the computation is carried out taking advantage of the previous one, what considerably reduces the amount of work. These general results are illustrated with the subspace of matrices M such that AM is symmetric. The main application is developed for the subspace of matrices with a given sparsity pattern which may be constructed iteratively by augmenting the set of non‐zero entries in each column. Finally, the effectiveness of the sparse preconditioners is illustrated with some numerical experiments. Copyright © 2002 John Wiley & Sons, Ltd.