On the enumeration of self-dual codes

We give the complete classification of all binary, self-dual, doubly-even (32, 16) codes. There are 85 non-equivalent, self-dual, doubly-even (32, 16) codes. Five of these have minimum weight 8, namely, a quadratic residue code and a Reed-Muller code, and three new codes. A set of generators is given for a code in each equivalence class together with its entire weight distribution and the order of its entire group with other information facilitating the computation of permutation generators. From this list it is possible to identify all self-dual codes of length less than 32 and the numbers of these are included.     

An analysis of seismic attenuation in random porous media

The attenuation of seismic wave in rocks has been one of the interesting research topics, but till now no poroelasticity models can thoroughly explain the strong attenuation of wave in rocks. In this paper, a random porous medium model is designed to study the law of wave propagation in complex rocks based on the theory of Biot poroelasticity and the general theory of stochastic process. This model sets the density of grain, porosity, permeability and modulus of frame as random parameters in space, and only one fluid infiltrates in rocks for the sake of better simulation effect in line with real rocks in earth strata. Numerical simulations are implemented. Two different inverse quality factors of fast P-wave are obtained by different methods to assess attenuation through records of virtual detectors in wave field (One is amplitude decay method in time domain and the other is spectral ratio method in frequency domain). Comparing the attenuation results of random porous medium with those of homogeneous porous medium, we conclude that the attenuation of seismic wave of homogeneous porous medium is far weaker than that of random porous medium. In random porous media, the higher heterogeneous level is, the stronger the attenuation becomes, and when heterogeneity σ = 0.15 in simulation, the attenuation result is consistent with that by actual observation. Since the central frequency (50 Hz) of source in numerical simulation is in earthquake band, the numerical results prove that heterogeneous porous structure is one of the important factors causing strong attenuation in real stratum at intermediate and low frequency.     

匹配滤波器组与FFT结合的伪码快速捕获方案研究

文中提出了部分匹配滤波器组与FFT相结合的伪码快速捕获的一种实现方案.该方案采用部分匹配滤波器组完成时域内完全并行搜索,同时采用128点FFT以实现频域的部分或完全并行搜索,以增加移位寄存器长度的较小代价去除大规模用以相干累加的SRAM,并且有效降低了FfT的工作时钟频率,便于硬件实现.该方案在一块FPGA上验证通过,并在0.18μm的CMOS的工艺下综合,电路规模是约合150.2万个晶体管,最高工作时钟频率是103MHz.该捕获方案最终等效于13.1万个串行相关器,极大提高了伪码的捕获速度.     

An Antennas and Propagation Approach to Improving Physical Layer Performance in Wireless Body Area Networks

A combined antennas and propagation study has been undertaken with a view to directly improving link conditions for wireless body area networks. Using tissue-equivalent numerical and experimental phantoms representative of muscle tissue at 2.45 GHz, we show that the node to node |S₂₁| path gain performance of a new wearable integrated antenna (WIA) is up to 9 dB better than a conventional compact Printed-F antenna, both of which are suitable for integration with wireless node circuitry. Overall, the WIA performed extremely well with a measured radiation efficiency of 38% and an impedance bandwidth of 24%. Further benefits were also obtained using spatial diversity, with the WIA providing up to 7.7 dB of diversity gain for maximal ratio combining. The results also show that correlation was lower for a multipath environment leading to higher diversity gain. Furthermore, a diversity implementation with the new antenna gave up to 18 dB better performance in terms of mean power level and there was a significant improvement in level crossing rates and average fade durations when moving from a single-branch to a two-branch diversity system.     

基于dynamips模拟器的帧中继网络仿真研究

本文利用dynamips模拟器仿真了一个较为复杂的帧中继网络,通过仿真测试对帧中继原理运行过程有了深刻的认识,实现了迅速检测真实路由上的配置功能,测试过程中排除故障能够很大的提高实际故障处理能力.因此具有极大的实用和学术价值.     

交通产业链上企业工程项目成本控制的影响因素研究

一些企业以轨道交通产业为纽带形成了交通产业链,轨道交通产业链上的企业要注重对相关工程项目实施全过程中的成本控制.从产业链的视角出发,围绕财务指标、内部业务流程指标、客户指标、学习与成长能力指标这4个方面,构建了评价指标体系和成本控制指标体系.运用层次分析法和模糊综合评价法进行评价和分析,找出了影响轨道交通产业链上企业工程项目成本控制的主要因素.研究表明,有55%的人认为财务指标、内部业务流程指标、客户指标、学习与成长能力指标这4个因素对轨道交通工程项目成本控制的影响较大.     

高补偿硅的阻–温特性

采用5Ω·cm的p型单晶硅,通过在高温下扩散金属锰的方法,可以得到高补偿硅.笔者选择没有光照下,室温电阻率为5.84×104Ω·cm的样品,进行测量电阻随温度的变化关系(温度从77 K上升到300 K).测试结果表明:在没有光照条件下测试时,电阻随温度的变化同普通的半导体;但在受到光照时,却出现极不相同的情况,这种不同,可能来自所掺杂的硅是一种光敏材料及掺入的杂质是一种深能级杂质.     

高补偿硅的光敏感特性

对电阻率为5 ·cm的p型单晶硅,在高温条件下采用扩散金属锰的方法,得到高补偿硅。并在室温(25℃)和液氮温度(196℃)下,测试了这种高补偿硅材料对光强的敏感性。测试结果表明:这种材料是一种光敏感材料,其敏感性受外加的电压、样品的温度及补偿后样品的电阻率影响。     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity. Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-access and hazardous. In addition, optical fiber dosimeters are immune to electrical and radio-frequency interference. In this paper, a novel remote optical fiber radiation dosimeter is described. The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL. The measuring range of the dosimeter is from 0.1 to 100 Gy.