分散固相萃取-超高效液相色谱-串联质谱法测定水产品中5种硝基咪唑类和6种苯二氮卓类药物北大核心CSCD

建立了分散固相萃取-超高效液相色谱-串联质谱法同时测定水产品中5种硝基咪唑类和6种苯二氮卓类药物残留的方法。样品用1%(v/v)氨水乙腈提取,提取液经十八烷基键合硅胶(C18)和N-丙基乙二胺(PSA)吸附剂净化,在45℃下用氮气吹至近干,用1 mL甲醇-水(1∶9,v/v)溶液复溶,过0.22μm尼龙-66滤膜后用超高效液相色谱-串联质谱测定。目标化合物采用Kinetex F5色谱柱(100 mm×3.0 mm,2.6μm)分离,以0.1%(v/v)甲酸水溶液和甲醇作为流动相进行梯度洗脱,在电喷雾离子源(ESI)、正离子扫描和多反应监测(MRM)模式下进行测定,基质匹配外标法定量。结果表明,5种硝基咪唑类和6种苯二氮卓类药物在8.5 min内完成色谱分离分析,目标物在0.5~20μg/L范围内线性关系良好,相关系数均大于0.995,检出限和定量限分别为0.2~0.5μg/kg和0.5~1.0μg/kg。以草鱼、对虾和大黄鱼为样品基质,在3个不同的添加水平下,5种硝基咪唑类和6种苯二氮卓类药物的平均回收率为73.2%~110.6%,相对标准偏差(RSD)小于15%。本研究建立的方法具有简单、快速、灵敏度高和成本低等优势,可用于水产品中5种硝基咪唑类和6种苯二氮卓类药物的快速检测。该方法的建立为我国水产品质量安全相关监管部门同时监控水产品中硝基咪唑类和苯二氮卓类药物残留提供了技术支持。     

Upgrading Solid Digestate from Anaerobic Digestion of Agricultural Waste as Performance Enhancer for Starch-Based Mulching Biofilm

Developing a green and sustainable method to upgrade biogas wastes into high value-added products is attracting more and more public attention. The application of solid residues as a performance enhancer in the manufacture of biofilms is a prospective way to replace conventional plastic based on fossil fuel. In this work, solid digestates from the anaerobic digestion of agricultural wastes, such as straw, cattle and chicken manures, were pretreated by an ultrasonic thermo-alkaline treatment to remove the nonfunctional compositions and then incorporated in plasticized starch paste to prepare mulching biofilms by the solution casting method. The results indicated that solid digestate particles dispersed homogenously in the starch matrix and gradually aggregated under the action of a hydrogen bond, leading to a transformation of the composites to a high crystalline structure. Consequently, the composite biofilm showed a higher tensile strength, elastic modulus, glass transition temperature and degradation temperature compared to the pure starch-based film. The light, water and GHG (greenhouse gas) barrier properties of the biofilm were also reinforced by the addition of solid digestates, performing well in sustaining the soil quality and minimizing N₂O or CH₄ emissions. As such, recycling solid digestates into a biodegradable plastic substitute not only creates a new business opportunity by producing high-performance biofilms but also reduces the environmental risk caused by biogas waste and plastics pollution.     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

Research on gamma-ray irradiation-assisted synthesis of cross-linked polystyrene via bulk polymerization

Journal of Radioanalytical and Nuclear Chemistry - Controlling heat accumulation is one of the major challenges for block materials synthesizing via bulk polymerization. In the paper, cross-linked...     

Chromatographic study of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse phase stationary phase with methyl-β-cyclodextrin as mobile additive

Abstract

The elution behavior of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse-phase high-performance liquid chromatography with methyl-β-cyclodextrin as mobile phase additive was studied, including germacrone, curzerene, furanodiene, and β-elemene. Stoichiometric ratio and apparent formation constants of inclusion complex formed by methyl-β-cyclodextrin and each analyte were calculated by varying the concentration of the additive in the mobile phase composed of methanol and water (90:10, v/v), in which the association constant for inclusion complex formed by the organic modifier methanol and methyl-β-cyclodextrin was also determined. Results showed that the stoichiometric ratio of all the inclusion complex was 1:1 when 0–9?mmol L^?1 of methyl-β-cyclodextrin was added in the mobile phase. Unusual retention behavior of the analyte germacrone was found, which was further investigated by the calculation of thermodynamic parameters. Meanwhile, enthalpy and entropy of the inclusion complexes and solute-stationary phase interactions were determined by linear van’t Hoff plots.     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

稀土双(11-钨硅酸)钾的质子导电性研究(英)

研究了K13［Ln（SiW11O39）2］nH2O（Ln=La，Ce，Pr，Nd，Sm，Gd）的质子导电性研究表明其导电性不仅与物质本性有关，也与外界条件如温度、频率等有关，不同结构的杂多化合物给出不同结构的质子导电性．总结了质子导电性随温度、结晶水数目、频率的变化总趋势．基于实验数据得出一些重要结论，所得数据未见文献报道．     

高温煤焦油的超临界萃取分馏研究

采用正戊烷溶剂,在超临界状态下,于220℃和5MPa~15MPa循序升压条件下,将高温煤焦油萃取分馏为10个液相窄馏分和1个固相沥青产物;切割深度达78.36%,萃余沥青收率为21.64%,明显低于常规蒸馏沥青收率。研究发现,所用高温煤焦油的初馏分萃取收率最高,随着萃取压力的增加,较低压力段一次萃取液相馏分的收率迅速减少;压力达到10 MPa,液相馏分总收率趋于峰值。元素分析和色质联用分析数据表明,随着萃取压力的增加,一次萃取获得窄馏分的碳氢原子比逐渐增加,平均环数和相对分子质量均逐渐增大,萃取馏分逐渐变重。     

一种微型FAIMS传感器芯片的研制

基于微机电系统(MEMS)技术,研制了一种微型高场非对称波形离子迁移谱(FAIMS)传感器芯片.芯片尺寸为18.8mm×12.4mm×1.2mm,由离子化区、迁移区、离子检测区组成.采用真空紫外灯离子源在大气压环境下对样品进行离子化,经过离子化区中聚焦电极的电场作用,实现离子在进入迁移区之前的聚焦,提高离子信号的强度.通过在上下玻璃上溅射Au/Cr(300nm/30nm)金属,并与厚度为200μm、采用感应耦合等离子体(ICP)工艺刻蚀的硅片键合,形成迁移区的矩形通道,尺寸为10mm×5mm×0.2mm.离子检测区为三排直径200μm、间距100μm交错排列的圆柱阵列式微法拉第筒,能同时检测正负离子.采用频率为2MHz,最大电压为364V,占空比为30%的高场非对称方波电压进行FAIMS芯片实验.以丙酮和甲苯为实验样品,载气流速80L·h-1,补偿电压从-10V到3V以0.1V的步长进行扫描,得到了丙酮和甲苯的FAIMS谱图,验证了FAIMS芯片的性能.丙酮和甲苯的FAIMS-MS实验进一步表明FAIMS系统实现了离子分离和过滤功能.