Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。     

稀土元素在含残余砷、锡09Cr2AlMoRE钢中的作用

对加稀土前后09Cr2AlMoRE钢取样分析化学成分,制备金相样用SEM-EDS研究了钢中析出物特征,制备透射电镜(TEM)试样通过TEM研究元素的晶界偏聚,并用热力学计算了稀土Ce,La,S和残余元素As反应固定残余元素As的可能性。研究结果表明:在低氧、硫的条件下,稀土镧可以和09Cr2AlMoRE钢中较低含量的砷(130×10-6)作用生成镧砷金属间化合物;铈、镧主要是通过形成稀土砷硫夹杂物固定钢中残余元素砷。另外,在本实验条件下稀土元素(64×10-6)只有很微量的偏聚在晶界,残余元素As不在晶界偏聚。     

用于直接甲醇燃料电池的侧链型磺化聚芳醚酮/聚乙烯醇交联膜的制备与性能研究

以高磺化度的侧链型磺化聚芳醚酮(S-SPAEK)和聚乙烯醇(PVA)为原料,通过溶液共混的方法在120℃下制备了PVA含量不同的S-SPAEK/PVA交联膜.红外光谱图表明S-SPAEK聚合物中的磺酸基团与PVA中的羟基反应生成酯键而形成共价交联.通过对交联膜的性能测试发现PVA的引入明显降低了膜的甲醇渗透系数,改善了膜的溶胀性,提高了膜的保水能力.S-SPAEK/PVA(85/15)交联膜水的脱附系数从S-SPAEK的3.1×10-8 cm2/s降低到2.9×10-9 cm2/s.在25℃和60℃时S-SPAEK/PVA(85/15)交联膜的甲醇渗透系数分别为2.6×10-7cm2/s和3.9×10-7cm2/s,明显低于相同温度下的纯S-SPAEK膜的8.1×10-7cm2/s与14.5×10-7cm2/s,而其质子传导率虽然有所下降,但是在25℃和80℃时分别达到了0.055 S/cm和0.083 S/cm,能够满足直接甲醇燃料电池(DMFCs)对质子交换膜的要求,有望在DMFCs中得到应用.     

二维柱坐标系辐射输运方程保球对称的离散纵标格式

 离散纵标格式是计算辐射输运方程的常用格式之一. 但是, 传统的离散纵标格式求解二维柱坐标系辐射输运方程模拟一维球对称问题时, 会出现明显的非对称现象, 球对称性被破坏. 针对该问题, 本文分析了传统离散纵标格式不能够保持球对称性的原因, 提出了空间基于柱坐标系、方向基于球坐标系的辐射输运方程, 并对该方程设计了新的离散纵标格式, 从理论上证明了当空间网格取球对称剖分时该离散格式能够保持一维球对称性的充分必要条件. 通过对真空球区域辐射输运、与物质耦合辐射输运等球对称算例的数值模拟, 验证了该格式的保球对称性, 球对称误差能够达到机器精度. 非对称辐射驱动模型以及非对称网格剖分条件下的数值模拟等算例也取得了较好的结果.     

Edge Flips in Surface Meshes

Little theoretical work has been done on edge flips in surface meshes despite their popular usage in graphics and solid modeling to improve mesh equality. We propose the class of \((\varepsilon ,\alpha )\)-meshes of a surface that satisfy several properties: the vertex set is an \(\varepsilon \)-sample of the surface, the triangle angles are no smaller than a constant \(\alpha \), some triangle has a good normal, and the mesh is homeomorphic to the surface. We believe that many surface meshes encountered in practice are \((\varepsilon ,\alpha )\)-meshes or close to being one. We prove that flipping the appropriate edges can smooth a dense \((\varepsilon ,\alpha )\)-mesh by making the triangle normals better approximations of the surface normals and the dihedral angles closer to \(\pi \). Moreover, the edge flips can be performed in time linear in the number of vertices. This helps to explain the effectiveness of edge flips as observed in practice and in our experiments. A corollary of our techniques is that, in \(\mathbb {R}^2\), every triangulation with a constant lower bound on the angles can be flipped in linear time to the Delaunay triangulation.     

Enantioselective sulfenylation of α-nitroesters catalyzed by diarylprolinols

The organocatalytic sulfenylation of α-nitroesters mediated by diaryl-l-prolinols was developed. A range of α-sulfenylated α-nitroesters were obtained in good yields with moderate to good enantioselectivities.     

A Low‐dimensional Viologen/Iodoargentate Hybrid [(BV)2­(Ag5I9)]n: Structure,Properties, and Theoretical Study

A new low‐dimensional benzyl viologen/iodoargentate hybrid, [(BV)₂(Ag₅I₉)]_n ( 1 ) (BV²⁺ = benzyl viologen) was prepared. In 1 , (Ag₆I₉)_n^2– chain exhibits a new type of one‐dimensional chain constructed from vertex‐sharing of Ag₅I₁₀ units, and its two‐dimensional layer structure was constructed from C–H ··· I hydrogen bonds. Strong luminescence at 404 nm can be detected in 1 . DFT calculation suggests that 1 displays a reduced bandgap, which is led by a more dispersed LUMO band of BV²⁺ compared with MV²⁺ in [MV(Ag₂I₄)]_n.     

One‐Pot Synthesis of Highly Substituted Polyheteroaromatic Compounds by Rhodium(III)‐Catalyzed Multiple C?H Activation and Annulation

A new method for the synthesis of highly substituted naphthyridine‐based polyheteroaromatic compounds in high yields proceeds through rhodium(III)‐catalyzed multiple C H bond cleavage and C C and C N bond formation in a one‐pot process. Such highly substituted polyheteroaromatic compounds have attracted much attention because of their unique π‐conjugation, which make them suitable materials for organic semiconductors and luminescent materials. Furthermore, a possible mechanism, which involves multiple chelation‐assisted ortho C H activation, alkyne insertion, and reductive elimination, is proposed for this transformation.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.