The accurate dimensional measurements within small internal structures

This paper shows that the dimension of internal structure of a component can be measured remotely to a resolution better than 5 μm by use of the combination of high resolution optical microscopy and image processing.A specialised high resolution, long working distance and diffraction limited lens was used to image within the component. A series of digital images were made to map spatially the interior of the component. An edge detector was then used to localise the specific location of features in order that an accurate internal measurement could be made. A visualisation of the internal surface finish was also achieved.     

A jet appearing when a black hole event horizon touches the rindler horizon

The Hawking effect of a nonuniformly rectilinearly accelerating Kinnersley black hole is studied. Its horizons are rotationally symmetric. Its Hawking temperature depends not only on the time, but also on the polar angle. When a Kinnersley black hole touches its Rindler horizon, the Hawking temperature at the contact point is reduced to zero. But at the opposite pole of the black hole, the Hawking temperature increases rapidly. A jet appears as a tail of the accelerating black hole.     

智能工作站主机的MMPIS实验模型研究──一个全互连式结构MMPIS硬件环境的设计与实现

本文介绍中日国际合作开发研究的Ａ１型智能网（Ａ１型ＩＮ）智能工作站（ＩＷ）主机的并行推理硬件结构的实验模型设计与实现，给出了一种并行推理硬件支持环境实现方案和该方案在实现中若干问题的解决方法。     

硬件握手双向选通型串行通信共享器的设计

本文介绍了ＩＢＭ－ＰＣ系列计算机通过ＲＳ－２３２Ｃ串行口与多个单片微机组成的分布式系统中一种可双向选通串行通信共享器的设计方法。给出通信共享器的设计电路；并对电路工作原理进行了详细剖析。     

Singular value decomposition-based MA order determination ofnon-Gaussian ARMA models

Singular-value-decomposition (SVD)-based moving-average (MA) order determination of non-Gaussian processes using higher-order statistics is addressed. It is shown that the MA order determination of autoregressive moving-average (ARMA) models is equivalent to the rank determination of a certain error matrix, and a SVD approach is proposed. Its simplified form is applied to pure MA models. To improve the robustness of the order selection, a combination of the SVD and the product of diagonal entries (PODE) test is proposed. Some interesting applications of the two SVD approaches are presented, and simulations verify their performance     

Efficient third-harmonic generation of a picosecond laser pulsewith time delay

A new configuration based on the polarization-mismatching scheme with time delay for efficient frequency tripling conversion is proposed in this paper. The calculated results showed that the requirement for the efficient frequency tripling conversion of a 1-ps laser pulse is not only the optimization of peak intensity of the second-harmonic pulse, but also the optimization of the pulse duration ratio and temporal difference between the o-polarization second-harmonic pulse and the e-polarization first-harmonic pulse due to group-velocity mismatch among the interacting pulses. With the proposed scheme the group velocity mismatch can be compensated. Overall energy conversion efficiency increases from 55% to 75% under the optimized conditions at the intensity of 6 GW/cm². The temporal shape of the third-harmonic pulse with 1 ps pulse duration has no subpulses. The optimization of the efficient frequency tripling conversion for intensities of over 75 GW/cm² is also described. The results showed that the maximum tripling energy conversion efficiency is close to 80% with the optimized doubler and tripler     

噪声测量作为筛选光电耦合器件的一种方法

本文针对目前用于光电耦合器件筛选方法的不足，提出了用测量耦合器件噪声功率谱的方法来筛选掉噪声值大的器件，给出一批光电耦合器件的测量统计结果及在不同工作点时的噪声功率谱，并给出相应的筛选标准，实验结果表明，这种方法是有效、可行的。     

THERMAL AND THERMO-ELASTIC-PLASTIC RESPONSE OF CERAMIC-METAL FUNCTIONALLY GRADED MATERIALS—THERMAL SHOCK PROBLEM

The thermal and thermo-elastic-plastic response of newly developed ceramic-metalfunctionally graded materials under a thermal shock load is studied.The materials are heated at the ce-ramic surface with a sudden high-intensity heat flux input,and cooled at the metal surface with aflowing liquid nitrogen.Emphasis is placed on two aspects:(1)the influence of the graded composi-tion of the materials on the temperature and stress response;and(2)the optimum design of the gradedcomposition from a unified viewpoint of the heat insulation property and stress relaxation property.Moreover,a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is alsomade to indicate the plasticity effect.     

气流式加速度传感器的敏感机理

介绍了在研制气流式加速度传感器过程中，为对气流式加速度传感器进行建模，作者对气流式加速度传感器的工作机理进行了理论性探讨。在分析过程中以流体力学、传热学和惯性理论为基础并结合实验结果，建立了适合于气流式加速度传感器的气体运动方程和能量方程。同时还讨论了热线测量加速度的方法及根据实验分析了输入加速度对腔体内温度及传感器输出电压的影响，从而为进一步研究一系列气流式传感器的工作机理提供了方法。     

Vibrational spectrum of uridine obtained by means of nonresonant-background-free CARS spectroscopy

Received: 18 June 1996/Revised version: 3 January 1997