Development and validation of HPLC coupled with triple quadrupole MS for the simultaneous determination of six phenolic acids,six flavonoids,and a lignan in Polygonum capitatum

Polygonum capitatum, a traditional Miao medicinal plant, has significant effects on the treatment of urinary system infections and pyelonephritis. However, no study about the comprehensive quality evaluation of P. capitatum has been reported. In this contribution, a rapid and validated method based on HPLC coupled with triple quadrupole MS was established for the simultaneous determination of six active flavonoids, six phenolic acids, and a lignan in extracts of P. capitatum. These compounds were separated within 10 min on a C₁₈ analytical column with gradient elution. All analyses were performed on an Agilent XDB C₁₈ column (2.1 × 100 mm, 3.5 μm) with a linear gradient elution of acetonitrile/water. The proposed method was applied to analyze 15 batches of samples with acceptable linearity (r², 0.9923–0.9992), precisions (RSD, 1.0–3.0%), repeatability (RSD, 2.0–3.2%), stability (RSD, 2.2–3.2%), and recovery (RSD, 2.1–3.6%) of the 13 compounds. These results demonstrated that this presented method was effective and reliable for the comprehensive quality evaluation of P. capitatum. Moreover, our study can provide chemical evidence to reveal the material basis of its therapeutic effects.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Glucose Oxidase/Cellulose–Carbon Nanotube Composite Paper as a Biocompatible Bioelectrode for Biofuel Cells

Biofuel cells are devices for generating electrical energy directly from chemical energy of renewable biomass using biocatalysts such as enzymes. Efficient electrical communication between redox enzymes and electrodes is essential for enzymatic biofuel cells. Carbon nanotubes (CNTs) have been recognized as ideal electrode materials because of their high electrical conductivity, large surface area, and inertness. Electrodes consisting entirely of CNTs, which are known as CNT paper, have high surface areas but are typically weak in mechanical strength. In this study, cellulose (CL)–CNT composite paper was fabricated as electrodes for enzymatic biofuel cells. This composite electrode was prepared by vacuum filtration of CNTs followed by reconstitution of cellulose dissolved in ionic liquid, 1-ethyl-3-methylimidazolium acetate. Glucose oxidase (GOx), which is a redox enzyme capable of oxidizing glucose as a renewable fuel using oxygen, was immobilized on the CL–CNT composite paper. Cyclic voltammograms revealed that the GOx/CL–CNT paper electrode showed a pair of well-defined peaks, which agreed well with that of FAD/FADH_2, the redox center of GOx. This result clearly shows that the direct electron transfer (DET) between the GOx and the composite electrode was achieved. However, this DET was dependent on the type of CNTs. It was also found that the GOx immobilized on the composite electrode retained catalytic activity for the oxidation of glucose.     

Synthesis and Stereochemistry of Some new Derivatives of 1,2-O-Cyclohexylidene-α-D-Xylofuranuronic Acid

Abstract

1,2-O-Cyclohexylidene-α-d-xylofuranuronic acid (2) has been converted into its 3-O-acetyl derivative and consecutively to the corresponding acid chloride and ethyl ester. Direct reaction of 2 with ethanol in the presence of p-to-luene sulphonic acid gave the ethyl ester. Reaction of 2 with phosphorus pentachloride in dry ether gave the acid chloride of 1,2-O-cyclohexylidene-3-O-dichlorophosphoryl–α-d-xylofuranuronic acid. Conformational data have been obtained from ¹H and ¹³C NMR measurements.     

Validity of Inorganic Nanosheets as an Efficient Planar Substituent To Enhance the Enantioselectivity of Transition‐Metal‐Catalyzed Asymmetric Synthesis

Effectively enhancing the enantioselectivity is a persistent challenge in heterogeneous asymmetric catalysis. Here, the validity of a layered double hydroxides (LDH) nanosheet as an efficient planar substituent to enhance the enantioselectivity has been investigated theoretically; first in vanadium‐catalyzed asymmetric epoxidation of allylic alcohols, and then in zinc‐catalyzed direct asymmetric aldol addition. The computational predication is further confirmed experimentally in zinc‐catalyzed direct asymmetric aldol addition by controlling the location of catalytic sites.     

A Triazatruxene‐Based Glycocluster as a Fluorescent Sensor for Concanavalin A

A new triazatruxene‐based fluorescent glycocluster has been designed, synthesized, and fully characterized by NMR spectroscopy and mass spectrometry. Furthermore, its specific and selective binding properties with concanavalin A (Con A) have been investigated by fluorescence spectroscopy, circular dichroism (CD) spectroscopy, and turbidity assay. The obtained results showed that the multivalent mannose‐modified triazatruxene exhibited specific binding with Con A, but no binding to peanut agglutinin (PNA) lectin or bovine serum albumin (BSA), corresponding to a two‐orders‐of‐magnitude higher affinity than that of monovalent mannose ligands. Most interestingly, a fluorescence enhancement of the triazatruxene‐based glycocluster was observed upon binding with Con A because of hydrophobic interactions involving sites close to the triazatruxene moiety. Furthermore, the inhibitory ability of the triazatruxene‐based glycocluster against ORN178‐ induced haemagglutination has been investigated by haemagglutination inhibition assay. The results indicated selective binding with ORN178.     

Ultraviolet light absorber with low surface energy: synthesis and characterization

Novel fluorine-containing ultraviolet absorbers (FBPs) with low surface energy were successfully synthesized based on 2,4-dihydroxy benzophenone (BP-1), and their structures were characterized by ¹H NMR, ¹³C NMR, FTIR, and HRMS. UV absorption of FBPs was studied in 10⁻⁴ M dichloromethane (CH₂Cl₂), which demonstrated the superior UV absorption capability of FBPs (ca. ?=1.7×10⁴ to 2.2×10⁴ at λ_max) over the matrix (?=1.7×10⁴ at λ_max). Quantum chemistry calculation was performed to investigate the stable structure and UV electronic absorption bands of FBPs. The surface chemistry information of high-chlorinated polyethylene (HCPE) coating films embedded with ultraviolet absorbers (UVAs) was given by X-ray photoelectron spectroscopy (XPS) and contact angle measurement. The results show that the surface enrichment capability of FBPs is remarkably better than traditional UVAs (including BP-1, BP-3, BP-12) because of the low surface energy properties of FBPs.     

[2,5‐Bis(2,2′‐bipyridyl‐6‐yl)‐3,4‐diazahexa‐2,4‐diene]dichloridomanganese(II): from a mononuclear compound to a three‐dimensional supramolecular framework through C—H...Cl hydrogen bonds and π–π stacking interactions

The title compound, [MnCl₂(C₂₄H₂₀N₆)], has been synthesized and characterized based on the multifunctional ligand 2,5‐bis(2,2′‐bipyridyl‐6‐yl)‐3,4‐diazahexa‐2,4‐diene (L). The Mn^II centre is five‐coordinate with an approximately square‐pyramidal geometry. The L ligand acts as a tridendate chelating ligand. The mononuclear molecules are bridged into a one‐dimensional chain by two C—H...Cl hydrogen bonds. These chains are assembled into a two‐dimensional layer through π–π stacking interactions between adjacent uncoordinated bipyridyl groups. Furthermore, a three‐dimensional supramolecular framework is attained through π–π stacking interactions between adjacent coordinated bipyridyl groups.     

Dual Sulfide–Disulfide Crosslinked Networks with Rapid and Room Temperature Self‐Healability

Polymer‐based crosslinked networks with intrinsic self‐repairing ability have emerged due to their built‐in ability to repair physical damages. Here, novel dual sulfide–disulfide crosslinked networks (s‐ssPxNs) are reported exhibiting rapid and room temperature self‐healability within seconds to minutes, with no extra healing agents and no change under any environmental conditions. The method to synthesize these self‐healable networks utilizes a combination of well‐known crosslinking chemistry: photoinduced thiol‐ene click‐type radical addition, generating lightly sulfide‐crosslinked polysulfide‐based networks with excess thiols, and their oxidation, creating dynamic disulfide crosslinkages to yield the dual s‐ssPxNs. The resulting s‐ssPxN networks show rapid self‐healing within 30 s to 30 min at room temperature, as well as self‐healing elasticity with reversible viscoelastic properties. These results, combined with tunable self‐healing kinetics, demonstrate the versatility of the method as a new means to synthesize smart multifunctional polymeric materials.