Catalytic allylic transfer reactions of functionalized aldehydes promoted by BINOL-Ti(IV) with synergistic reagent

Practical and efficient catalytic asymmetric allylic transfer reactions of tin reagents promoted by BINOL-Ti[OCH(CF₃)₂]₂ complex by the utilization of t-BuSBEt₂ are successful with a variety of functionalized aldehydes containing ketone, aldehyde, ester, amide, or carbamoyl functionality and affords products in high levels of enantioselectivity.     

Virtual Fiber Configuration for Dynamic Lightpath Establishment in Large-scaled Optical Networks

Recently, progress has been made in the Generalized Multi-Protocol Label Switching (GMPLS) and Automatic Switched Optical Networks (ASON) standardizations. These technologies realize construction of large-scaled optical networks, interconnections among single-domain Wavelength Division Multiplexing (WDM) networks, and direct communication over multi-domain WDM networks. Meanwhile, it is known that the topology of the Internet exhibits the power-law attribute. Since the topology of the Internet, which is constructed by interconnecting ASs, exhibits the power-law, there is a possibility that large-scale WDM networks, which are constructed by interconnecting WDM networks, will also exhibit the power-law attribute. One of the structural properties of a topology that adheres to the power-law is that most nodes have just a few links, although some have a tremendous number of them. Another property is that the average distance between nodes is smaller than in a mesh-like network. A natural question is how such a structural property performs in WDM networks. In this paper, we first investigate the property of the power-law attribute of physical topologies for WDM networks. We compare the performance of WDM networks with mesh-like and power-law topologies, and show that links connected to high-degree nodes are bottlenecks in power-law topologies. To relax this, we introduce a concept of virtual fiber, which consists of two or more fibers, and propose its configuration method to utilize wavelength resources more effectively. We compare performances of power-law networks with and without our method by computer simulations. The results show that our method reduces the blocking probabilities by more than one order of magnitude.     

AN INVARIANCE OF CDF EQUATION

ＡＮＩＮＶＡＲＩＡＮＣＥＯＦＣＤＦＥＱＵＡＴＩＯＮ￥ＴＩＡＮＣＨＯＵＡｂｓｔｒａｃｔ：ＴｈｉｓｐａｐｅｒｐｒｅｓｅｎｔｓａｎｅｗｉｎｖａｒｉａｎｃｅｆｏｒｔｈｅＣＤＦｅｑｕａｔｉｏｎ．Ｕｓｉｎｇｔｈｉｓｉｎｖａｒｉａｎｃｅ，ｔｈｅａｕｔｈｏｒｏｂｔａ...     

Chemical Speciation of Amphoteric Ions on Semi‐Dry Scrubber Residue and Bag‐House Ash from MSWI

Two series of size‐fractionated combusted residues, a bag‐house ash and a scrubber residue, from a municipal solid waste incinerator (MSWI) were prepared and extracted by means of sequential chemical extraction (SCE) procedures proposed by Tessier. Concentrations of water‐soluble phase, exchangeable phase, carbonated phase, Fe/Mn oxide phase, organic matter phase, and residual phase bound amphoteric metals (Pb and Zn) were obtained, and have been compared with those of single batch extraction of toxic characteristic leaching procedure (TCLP). In each size fraction of baghouse ash or scrubber residue, lead or zinc shows a common phenomena that the TCLP value is always lower than the content of the water‐soluble fraction. For lead, baghouse ash has a significant size‐dependent distribution on the water‐soluble phase to perform a size‐dependent test of lead in the TCLP test. The zinc TCLP data having less size dependence might be due to that neither the baghouse ash nor the scrubber residue has a size‐dependent distribution on the water‐soluble zinc phase.     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Destination-driven routing for low-cost multicast

We present a destination-driven algorithm that optimizes for applications, such as group video or teleconferencing, that require multicast trees with low total cost. The destination-driven algorithm uses a greedy strategy based on shortest-path trees and minimal spanning trees but biases routes through destinations. The performance of the algorithm is analyzed through extensive simulation and compared with several Steiner tree heuristics and the popular shortest-path tree (SPT) method. The algorithm is found to produce trees with significantly lower overall cost than the SPT while maintaining reasonable per-destination performance. Its performance also compares well with other known Steiner heuristics. Moreover, the algorithm does not suffer from high complexity common to most Steiner tree heuristics and builds a route by querying only incident links for cost information     

Analysis of a grating metal structure with broad back-scatteringfield pattern for applications in vehicle collision avoidancesystem

In this paper, grating metal structures with broad and flat back-scattering field patterns are studied for possible applications in a vehicle collision avoidance system. The two-dimensional TE scattering of a planar grating structure and a curved grating structure are analyzed at a frequency of 77 GHz. For the planar structure, the method of moments and Floquet's theorem are used to solve the induced current and the resultant back-scattering field. Based on the results of the planar structure, the scattering field of the curved grating structure is obtained by using a perturbation method. The influence on the field pattern of the curvature as well as other structure parameters, such as the width and geometry of each period in the grating structure, is investigated     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Phase-Only Encryption and Single Path Decryption System Using Phase-Encoded Exclusive-OR Rules in Fourier Domain

A phase-only encryption scheme using phase-encoded exclusive-OR (XOR) rules in a Fourier plane and a single path decryption system are presented. To generate phase-only encrypted data, a zero-padded original image, multiplied by a random phase image, is Fourier transformed and its real-valued data is encrypted with key data by using phase-encoded XOR rules. Since the original information is encrypted on the Fourier plane, the proposed encryption is more tolerant to loss of key information by scratching or cutting than previous XOR encryption in a space domain. A decryption is simply performed based on 2-f setup with spatial filter by Fourier transform for multiplication phase-only encrypted data with phase-only key data. Due to single path architecture without a reference wave, the proposed system is resistant to mechanical vibrations and fluctuation. Numerical simulations have confirmed the validity of the proposed encryption scheme and simple decryption architecture.