Highly Efficient C?H Oxidative Activation by a Porous MnIII–Porphyrin Metal–Organic Framework under Mild Conditions

A simple strategy to rationally immobilize metalloporphyrin sites into porous mixed‐metal–organic framework (M′MOF) materials by a metalloligand approach has been developed to mimic cytochrome P450 monooxygenases in a biological system. The synthesized porous M′MOF of [Zn₂(MnOH–TCPP)(DPNI)] ? 0.5 DMF ? EtOH ? 5.5 H₂O ( CZJ‐1 ; CZJ=Chemistry Department of Zhejiang University; TCPP=tetrakis(4‐carboxyphenyl)porphyrin); DPNI=N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenetetracarboxydiimide) has the type of doubly interpenetrated cubic α‐Po topology in which the basic Zn₂(COO)₄ paddle‐wheel clusters are bridged by metalloporphyrin to form two‐dimensional sheets that are further bridged by the organic pillar linker DPNI to form a three‐dimensional porous structure. The porosity of CZJ‐1 has been established by both crystallographic studies and gas‐sorption isotherms. CZJ‐1 exhibits significantly high catalytic oxidation of cyclohexane with conversion of 94 % to the mixture of cyclohexanone (K) and cyclohexanol (A) (so‐called K–A oil) at room temperature. We also provided solid experimental evidence to verify the catalytic reaction that occurred in the pores of the M′MOF catalyst.     

Self‐Assembled Poly(N‐methylaniline)–Lignosulfonate Spheres: From Silver‐Ion Adsorbent to Antimicrobial Material

Self‐assembled poly(N‐methylaniline)–lignosulfonate (PNMA–LS) composite spheres with reactive silver‐ion adsorbability were prepared from N‐methylaniline by using lignosulfonate (LS) as a dispersant. The results show that the PNMA–LS composite consisted of spheres with good size distribution and an average diameter of 1.03–1.27 μm, and the spheres were assembled by their final nanofibers with an average diameter of 19–34 nm. The PNMA–LS composite spheres exhibit excellent silver‐ion adsorption; the maximum adsorption capacity of silver ions is up to 2.16 g g^?1 at an adsorption temperature of 308 K. TEM and wide‐angle X‐ray results of the PNMA–LS composite spheres after absorption of silver ions show that silver ions are reduced to silver nanoparticles with a mean diameter of about 11.2 nm through a redox reaction between the PNMA–LS composite and the silver ions. The main adsorption mechanism between the PNMA–LS composite and the silver ions is chelation and redox adsorption. In particular, a ternary PNMA–LS–Ag composite achieved by using the reducing reaction between PNMA–LS composite spheres and silver ions can be used as an antibacterial material with high bactericidal rate of 99.95 and 99.99 % for Escherichia coli and Staphylococcus aureus cells, respectively.     

Monoester Copillar[5]arenes: Synthesis,Unusual Self‐Inclusion Behavior,and Molecular Recognition

The self‐inclusion behavior of monoester copillar[5]arenes depends on the position of the ester group, which causes different guest selectivities. Monoester copillar[5]arenes bearing an acetate chain can form stable self‐inclusion complexes in low‐ and high‐concentration solution and exhibit high guest selectivity. However, a monoester copillar[5]arene bearing a butyrate chain can not form a self‐inclusion complex and exhibits low guest selectivity. Thus, a new class of stable self‐inclusion complexes of copillar[5]arenes was explored to improve the selectivity of molecular recognition.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Estimation of cellulose nanofibre aspect ratio from measurements of fibre suspension gel point

Cellulose nanofibre aspect ratio controls the properties of sheets made from nanofibres and processing conditions, but aspect ratio is very difficult to measure. In this paper, aspect ratio was estimated from the gel point of a cellulose nanofibre suspension, the solids concentration at which the transition from a dilute to a semi-dilute suspension occurs. Four batches of cellulose nanofibres were tested. Two were produced from softwood fibres using ball milling. Commercially produced microfibrillated cellulose material was also used, both in as supplied form and after removal of the larger fibres by filtering. The average diameter measured from SEM images of fibres ranged from 33 to 73 nm. One sample was too heavily treated and an average dimension could not be measured. The gel-point was measured both from the height of a layer of cellulose nanofibres sedimented from a dilute suspension or from the lowest solids concentration at which a yield stress could be measured using a vane rheometer. The two methods were closely in agreement for all samples. Aspect ratio was then calculated using either the effective medium (EMT) or crowding number (CN) theories. Aspect ratio calculated with an assumed fibre density of 1,500 kg/m³, using the CN theory ranged from 155 to 60. Use of the EMT theory reduced the calculated aspect ratio by between 11 and 23 %. Reducing the assumed density in suspension from 1,500 to 1,166 kg/m³ reduced the calculated aspect ratio by 12–14 %. The heavily treated sample had by far the lowest aspect ratio.     

“One pot” homogeneous synthesis of thermoplastic cellulose acetate-graft-poly(l-lactide) copolymers from unmodified cellulose

Using native cellulose as the starting material, cellulose acetate-graft-ploy (l-lactide) (CA-g-PLA) copolymers were successfully synthesized by “one-pot” process in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). In this process, cellulose was first reacted with acetic anhydride, yielding cellulose acetate (CA), and then ring opening graft copolymerization of l-lactide was carried out from the residual hydroxyl groups of CA in the same solution using 4-dimethylaminopridine (DMAP) as the catalyst. Both acetyl and ploy (l-lactide) contents in CA-g-PLA copolymers could be well controlled by changing reaction conditions. The structures and thermal properties of CA-g-PLA copolymers were characterized. The glass transition temperature T_g of copolymers decreased with increasing PLA content. Compared to the pure PLA and cellulose-graft-PLA copolymers, the CA-g-PLA copolymers possessed better thermo mechanical properties in a temperature range of 60–130 °C. When the molar substitution of PLA (MS_PLA) was above 1.71, the CA-g-PLA copolymers exhibited thermoplastic behavior and could be processed by conventional thermal processing methods, such as injection molding and melt spinning.     

Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites

Highly intrinsic conductive polypyrrole/cellulose fiber composites (CF) were successfully prepared through in situ chemical oxidation polymerization simply by increasing fiber concentration at the same dosage of pyrrole, oxidant and dopant (based on the weight of dry fiber). FeCl₃ and anthraquinone-2-sulfonic acid sodium salt (AQSNa) were utilized as oxidant and dopant. As fiber concentration increased from 1 % (CF1) to 20 % (CF20), N and S content increased from 0.24 and 0.25 % to 1.24 and 0.89 %, and great increase in the retention of PPy and AQSNa was confirmed by elemental analysis. In addition, on the surface of conductive fiber, PPy of compact fibroid structure was detected instead of interconnected globular structure at higher fiber concentration. Furthermore, scanning transmission electron microscope and X-ray photoelectron spectroscopy (XPS)-depth profile analysis demonstrated denser and more uniformly distributed PPy inside fiber wall for CF20, while PPy tended to deposit on the surface of fiber for CF1. Fourier transform infrared spectroscopy, together with XPS certified that the PPy with longer conjugation length and higher doping level across the conductive fiber was obtained at higher fiber concentration. The doping level for CF10 decreased from 21.55 to 16.39 % with increasing fiber wall thickness, while that of CF20 decreased slightly from 30.73 to 24.10 %. The resulting CF20 showed lowest surface resistivity of 0.433 KΩ/square, as well as improved electro-conductivity stability. The incorporation of more PPy in CF improved the thermal stability.     

Preparation and characterization of oxidized regenerated cellulose film for hemostasis and the effect of blood on its surface

Hemostatic effects of oxidized regenerated cellulose (ORC) are well-known but its mechanism has never been demonstrated clearly. Since thrombus formation is a kind of surface phenomenon, we changed the morphology of cellulose to form a kind of membrane with ionic liquid as solution, and also we prepared ORC films with nitrogen dioxide(NO₂)/carbon tetrachloride(CCl₄) oxidation system reacting for 16, 40, 64 and 88 h, respectively. FTIR and NMR spectra showed that NO₂/CCl₄ oxidation system had a high selectivity on hydroxyl group at C6 of regenerated cellulose. With the oxidation time prolonging, the carboxyl content was enhanced and the DP was reduced. The XPS results suggested that a new carboxyl bond was formed due to the increasing of oxygen content. From contact angle analysis, the wettability of blood on the ORC film surface was better than that of the regenerated cellulose film, which was beneficial for the blood to spread. SEM photographs showed that the ORC film oxidized for 40 h could adsorb and activate more platelets and erythrocytes. Hemostatic evaluation and enzyme-linked immunosorbent assay indicated that the ORC film had a dramatic hemostatic performance, and the products of platelets release reaction, activated platelets glycoprotein and activated clotting enzymes were increased simultaneously. Moreover, the possible mechanism of the hemostasis for ORC film was discussed.     

Buildup mechanism of carboxymethyl cellulose and chitosan self-assembled films

Films with different numbers of layers have been built by alternating the adsorption of carboxymethyl cellulose (CMC) and chitosan (CHI) at different pH levels. The adsorption process was recorded by quartz crystal microbalance (QCM). The results showed that under all pH conditions considered, the growth of the films is nonlinear. The film construction performed at pH 4.0 (preferred assembly pH) with different numbers of bilayers (CMC/CHI as one bilayer) was also observed step by step by atomic force microscopy (AFM). Comparing the growth process from QCM with the surface morphological changes from AFM shows the existence of an inhomogeneous structure for the first nine bilayers, and, after a coalescence of islands, an increase in the number of bilayers was demonstrated. The possible growth mechanism was also evaluated.     

3D打印技术制备生物医用高分子材料的研究进展

3D打印技术能够根据不同患者需要,快速精确制备适合不同患者的个性化生物医用高分子材料,并能同时对材料的微观结构进行精确控制.因此,这种新兴的医用高分子材料制备技术在未来生物医学应用(尤其是组织工程应用)中具有独特的优势.近年来,对于3D打印技术制备生物医用高分子材料的研究开发受到了越来越多的关注.不同的生物相容高分子原料被应用于3D打印技术,而这些3D成型高分子材料被用于体外细胞培养,或动物模型的软组织或硬组织修复中.本文主要介绍了近年来3D打印技术在生物医用高分子材料制备中的研究进展,并对该领域的未来应用和挑战进行了展望.