A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

Coding approaches to fault tolerance in linear dynamic systems

This paper discusses fault tolerance in discrete-time dynamic systems, such as finite-state controllers or computer simulations, with focus on the use of coding techniques to efficiently provide fault tolerance to linear finite-state machines (LFSMs). Unlike traditional fault tolerance schemes, which rely heavily-particularly for dynamic systems operating over extended time horizons-on the assumption that the error-correcting mechanism is fault free, we are interested in the case when all components of the implementation are fault prone. The paper starts with a paradigmatic fault tolerance scheme that systematically adds redundancy into a discrete-time dynamic system in a way that achieves tolerance to transient faults in both the state transition and the error-correcting mechanisms. By combining this methodology with low-complexity error-correcting coding, we then obtain an efficient way of providing fault tolerance to k identical unreliable LFSMs that operate in parallel on distinct input sequences. The overall construction requires only a constant amount of redundant hardware per machine (but sufficiently large k) to achieve an arbitrarily small probability of overall failure for any prespecified (finite) time interval, leading in this way to a lower bound on the computational capacity of unreliable LFSMs.     

Outage capacities and optimal power allocation for fading multiple-access channels

We derive the outage capacity region of an M-user fading multiple-access channel (MAC) under the assumption that both the transmitters and the receiver have perfect channel side information (CSI). The outage capacity region is implicitly obtained by deriving the outage probability region for a given rate vector. Given a required rate and average power constraint for each user, we find a successive decoding strategy and a power allocation policy that achieves points on the boundary of the outage probability region. We discuss the scenario where an outage must be declared simultaneously for all users (common outage) and when outages can be declared individually (individual outage) for each user.     

The thermodynamic characteristics of formation of vacancies in carbon subgroup element crystals

A method for calculating the parameters of formation of vacancies in crystals formed by spherically symmetrical atoms was developed. Both quantum effects at low temperatures and the possibility of the delocalization of atoms at high temperatures were studied. The parameters of formation of vacancies in carbon subgroup element crystals C-diam, Si, Ge, α-Sn, and Pb were calculated. The inclusion of the delocalization of atoms was shown to increase the enthalpy, entropy, and volume of vacancy formation. At low temperatures, the parameters of vacancy formation were found to depend strongly on the temperature, and the entropy of vacancy formation became negative. At high temperatures, close agreement with experimental data and theoretical estimates reported by other authors was obtained. The temperature dependence of vacancy parameters was studied for diamond heated isobarically from 100 to 4500 K. The applicability scope of the Arrhenius equation with a temperature-independent activation energy is discussed. The validity of the “compensation rule” (correlation between the entropy and enthalpy of vacancy formation) was demonstrated. It was also shown that the volume and entropy of vacancy formation were correlated over the whole temperature range studied.

     

Calculation of diatomic molecules with the lctoc method. Excited states of some homonuclear molecules and ions

Calculations are performed, using a basis of two-center functions described previously, for excited states of the following three-and four-electron compounds: H₂ ^–, He₂ ⁺, He₂, Li₂ ⁺². High efficiency is demonstrated for the frozen ionic core approximation and the nonorthogonal orbital method in such calculations. For four-electron systems the practical feasibility of the frozen hybrid core approximation is demonstrated.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 53–56, August, 1987.     

Power spectral density of CMI-coded TV signal transmitted through fibre-optic heterodyne system

An expression is derived for the power spectral density of a coded mark inversion (CMI) TV signal transmitted through a fibre-optic heterodyne system. An illustrative example is given, and its power spectral density has been computed numerically.     

ISLAND—Inverse Square Law Acceleration Measurement Using iNertial Drift

By using a novel free-flying, rotating, optical bench aboard the International Space Station (ISS) as the basis for a measurement of differential acceleration between two gravitating bodies, in principle the Newtonian inverse-square law and the constant of gravitation, G, can be determined at the parts in 10⁶ level.     

Model-driven systems development and integration environment

Telecommunications operators are undergoing massive transformations in order to metamorphose themselves into the ICT world and compete with agile, lean IT organisations. The main challenges facing telecommunications operators, such as BT, are to reduce costs and increase agility in deploying software systems for provisioning ICT services. Despite using reusable capabilities and COTS packages, the major source of increased cost lies in the heavy integration tax we incur for integrating diverse systems implemented on diverse platforms and middleware, with heterogeneous data and process models. This paper looks at cost implications of lengthy and often manual migration to-and-from systems and platforms, and shows the clear business benefits of model-driven development (MDD) as defined by the Object Management Group (OMG). It is clearly demonstrated that model-driven development has matured into a practical, industrialised, scalable and evolvable technology, culminating from decades of R&D on specification and design languages, executable formalisms and domainspecific languages and language transformations.     

Remotely powered addressable UHF RFID integrated system

This paper presents a fully integrated remotely powered and addressable radio frequency identification (RFID) transponder working at 2.45 GHz. The achieved operating range at 4 W effective isotropically radiated power (EIRP) base-station transmit power is 12 m. The integrated circuit (IC) is implemented in a 0.5 /spl mu/m silicon-on-sapphire technology. A state-of-the-art rectifier design achieving 37% of global efficiency is embedded to supply energy to the transponder. The necessary input power to operate the transponder is about 2.7 /spl mu/W. Reader to transponder communication is obtained using on-off keying (OOK) modulation while transponder to reader communication is ensured using the amplitude shift keying (ASK) backscattering modulation technique. Inductive matching between the antenna and the transponder IC is used to further optimize the operating range.