雪崩光电探测器的击穿效应模型分析

基于CMOS工艺制备了空穴触发的Si基雪崩探测器(APD),基于不同工作温度下器件的击穿特性,建立空穴触发的雪崩器件的击穿效应模型。根据雪崩击穿模型和击穿电压测试结果,拟合曲线得到击穿电场与温度的关系参数(dE/dT),器件在250～320 K区间内,击穿电压与温度是正温度系数,器件发生雪崩击穿为主,dV/dT=23.3 mV/K,其值是由倍增区宽度以及载流子碰撞电离系数决定的。在50～140 K工作温度下,击穿电压是负温度系数,器件发生隧道击穿,dV/dT=-58.2 mV/K,其值主要受雪崩区电场的空间延伸和峰值电场两方面因素的影响。     

Metal Single-Site Molecular Complex–MXene Heteroelectrocatalysts Interspersed Graphene Nanonetwork for Efficient Dual-Task of Water Splitting and Metal–Air Batteries

Development of multifunctional electrocatalysts with high efficiency and stability is of great interest in recent energy conversion technologies. Herein, a novel heteroelectrocatalyst of molecular iron complex (Fe_MC)-carbide MXene (Mo₂TiC₂T_x) uniformly embedded in a 3D graphene-based hierarchical network (GrH) is rationally designed. The coexistence of Fe_MC and MXene with their unique interactions triggers optimum electronic properties, rich multiple active sites, and favorite free adsorption energy for excellent trifunctional catalytic activities. Meanwhile, the highly porous GrH effectively promotes a multichannel architecture for charge transfer and gas/ion diffusion to improve stability. Therefore, the Fe_MC–MXene/GrH results in superb performances towards oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The practical tests indicate that Zn/Al–air batteries derived from Fe_MC–MXene/GrH cathodic electrodes produce high power densities of 165.6 and 172.7 mW cm⁻², respectively. Impressively, the liquid-state Zn–air battery delivers excellent cycling stability of over 1100 h. In addition, the alkaline water electrolyzer induces a low cell voltage of 1.55 V at 10 mA cm⁻² and 1.86 V at 0.4 A cm⁻² in 30 wt.% KOH at 80 °C, surpassing recent reports. The achievements suggest an exciting multifunctional electrocatalyst for electrochemical energy applications.     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.     

Implementation of mmWave long-range backhaul for UAV-BS

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.     

Hydropolymerization of ethylene,initiated by carbon monoxide,on Co-zeolite catalysts at temperatures below 100°C

Conclusions Both the extent of C₂H₄ hydropolymerization, initiated by 0.01% CO, on Co zeolites at a temperature below 100°C, and the initiating effect increase symbatically with increase in the ratio of SiO₂/Al₂O₃ in the zeolite in the investigated limits (from 2 to 10).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 894–896, April, 1974.     

Calculation of vertical ionization potentials of difluoramine by perturbation corrections to koopmans' theorem

The vertical ionization potentials of difluoramine are calculated by perturbation corrections to Koopmans' theorem. The calculation shows that difluoraimine has three overlapping bands between 15 and 16 eV. The calculated results compare well with the experimental values. The photoelectron spectrum of difluoramine is compared with that of OF₂ and CH₂F₂.     

Shake-up satellites in Hel photoelectron spectra: N2O4 and CH3O

Low-lying vacant molecular orbitals may lead not only to a breakdown of Koopmans' theorem but also to satellite structure in photoelectron spectra. This paper reports examples of the relatively infrequent appearance of shake-up satellites in Hel photoelectron spectra, namely those of N₂O₄ and CH₃NO. An extended version of the HAM/3 program was used to interpret these spectra.     

旋转填充床的流体力学特性与传递过程的理论研究进展

旋转填充床(RPB)是一种高效的强化传递过程设备，亦是一种高效的混合与多相反应设备，在化工、材料、冶金、能源、环保等领域有着广泛的应用前景。本文概要地介绍了近年来对该类装置的流体力学特性和传递过程的理论研究进展。     

Rheology of hydrophobically modified polyacrylamide-co-poly(acrylic acid) on addition of surfactant and variation of solution pH

Constant shear and shear dependent viscosity measurements are reported in aqueous systems of co- and terpolymers of acrylamide (AM), N-n-alkylacrylamide (C10, C12, and C14 alkyl groups), and acrylic acid (AA) with added anionic surfactant sodium dodecyl sulfate (SDS). The results are presented as three-dimensional plots of viscosity vs surfactant concentration and pH at constant shear rate or viscosity vs shear rate and surfactant concentration at constant pH. For terpolymers incorporating AA, a strong viscosity maximum is observed at intermediate pH values (pH 4-6) where the AA groups are partially ionized and at SDS concentrations close to the critical micelle concentration. At high pH, all AA incorporating terpolymer solutions with SDS are strongly shear thinning, but at pH 3-4 the systems of terpolymers with SDS are strongly shear thickening at low shear, followed by a shear-thinning region at high shear. These results are explained in terms of surfactant-mediated network formation with polymer coil expansion and hydrogen bonding between partially ionized AA groups as additional factors.