A Conductive 2D Conjugated Tetrathia[8]circulene-Based Nickel Metal–Organic Framework for Energy Storage

Herein, a novel D₄ symmetrical redox-active ligand tetrathia[8]circulene-2,3,5,6,8,9,11,12-octaol (8OH-TTC) is designed and synthesized, which coordinates with Ni²⁺ ions to construct a 2D conductive metal-organic framework (2D c-MOF) named Ni-TTC. Ni-TTC exhibits typical semiconducting properties with electrical conductivity up to ≈1.0 S m⁻¹ at 298 K. Furthermore, magnetism measurements show the paramagnetic property of Ni-TTC with strong antiferromagnetic coupling due to the presence of semiquinone ligand radicals and Ni²⁺ sites. In virtue of its decent electrical conductivity and good redox activity, the gravimetric capacitance of Ni-TTC is up to 249 F g⁻¹ at a discharge rate of 0.2 A g⁻¹, which demonstrates the potential of tetrathia[8]circulene-based redox-active 2D c-MOFs in energy storage applications.     

Interfacial Proton Supply/Filtration Regulates the Dynamics of Electrocatalytic Nitrogen Reduction Reaction: A Perspective

As a promising energy carrier, ammonia synthesis by electrocatalytic nitrogen reduction reaction (eNRR) is a promising green and low-carbon ammonia synthesis strategy that can replace the traditional Haber–Bosch process. However, the development of eNRR processes is mainly severely constrained by competitive hydrogen evolution reaction (HER), and the corresponding strategies to inhibit this adverse side reaction to obtain high eNRR selectivity are still limited. In addition, for this complex reaction involving gas–liquid–solid three-phase interface and proton/electron transfer, it is great significance to analyze and summarize the existing inhibition HER strategies from the viewpoint of dynamics. In view of this, this work reviews proton supply/filtration regulation strategy in catalytic system, allowing a systematic survey of the literature focusing on interface membrane regulation (inorganic membrane and organic membrane), electrolyte regulation (metal-mediated strategy and electrolyte ion regulation strategy) and system device design (electrode structure design and electrolytic cell device design). Constructive catalytic system design guidance is also suggested to inhibit hydrogen evolution and improve NH₃ selectivity, aiming for scalable and economically feasible applications.     

Dual-band reflective polarization converter based on metasurface

In this paper, a dual-band and reflective polarization converter based on metasurface is proposed. Its unit cell is composed of two layers of metal plates separated by a dielectric substrate. The simulation results show that the proposed converter is able to convert x- or y-polarized incident waves into cross-polarized waves perfectly in frequency bands of 6.75—10.59 GHz and 17.78—19.61 GHz, and the polarization conversion ratio (PCR) is nearly 100%, which can also convert linearly polarized waves into circularly polarized waves at four frequencies. It can be widely used in applications of radar satellites, antenna design and telecommunication with the function of realizing polarization conversion in two bands and achieving high PCR simultaneously.     

Nanocellulose-Carboxymethylcellulose Electrolyte for Stable,High-Rate Zinc-Ion Batteries

Aqueous Zn ion batteries (ZIBs) are one of the most promising battery chemistries for grid-scale renewable energy storage. However, their application is limited by issues such as Zn dendrite formation and undesirable side reactions that can occur in the presence of excess free water molecules and ions. In this study, a nanocellulose-carboxymethylcellulose (CMC) hydrogel electrolyte is demonstrated that features stable cycling performance and high Zn²⁺ conductivity (26 mS cm⁻¹), which is attributed to the material's strong mechanical strength (≈70 MPa) and water-bonding ability. With this electrolyte, the Zn-metal anode shows exceptional cycling stability at an ultra-high rate, with the ability to sustain a current density as high as 80 mA cm⁻² for more than 3500 cycles and a cumulative capacity of 17.6 Ah cm⁻² (40 mA cm⁻²). Additionally, side reactions, such as hydrogen evolution and surface passivation, are substantially reduced due to the strong water-bonding capacity of the CMC. Full Zn||MnO₂ batteries fabricated with this electrolyte demonstrate excellent high-rate performance and long-term cycling stability (>500 cycles at 8C). These results suggest the cellulose-CMC electrolyte as a promising low-cost, easy-to-fabricate, and sustainable aqueous-based electrolyte for ZIBs with excellent electrochemical performance that can help pave the way toward grid-scale energy storage for renewable energy sources.     

Ultrahigh Energy Storage Capacitors Based on Freestanding Single-Crystalline Antiferroelectric Membrane/PVDF Composites

Inorganic/organic dielectric composites are very attractive for high energy density electrostatic capacitors. Usually, linear dielectric and ferroelectric materials are chosen as inorganic fillers to improve energy storage performance. Antiferroelectric (AFE) materials, especially single-crystalline AFE oxides, have relatively high efficiency and higher density than linear dielectrics or ferroelectrics. However, adding single-crystalline AFE oxides into polymers to construct composite with improved energy storage performance remains elusive. In this study, high-quality freestanding single-crystalline PbZrO₃ membranes are obtained by a water-soluble sacrificial layer method. They exhibit classic AFE behavior and then 2D–2D type PbZrO₃/PVDF composites with the different film thicknesses of PbZrO₃ (0.1-0.4 µm) is constructed. Their dielectric properties and polarization response improve significantly as compared to pure PVDF and are optimized in the PbZrO₃(0.3 µm)/PVDF composite. Consequently, a record-high energy density of 43.3 J cm⁻³ is achieved at a large breakdown strength of 750 MV m⁻¹. Phase-field simulation indicates that inserting PbZrO₃ membranes effectively reduces the breakdown path. Single-crystalline AFE oxide membranes will be useful fillers for composite-based high-power capacitors.     

Sufficient Utilization of Mn2+/Mn3+/Mn4+ Redox in NASICON Phosphate Cathodes towards High-Energy Na-Ions Batteries

Na superionic conductor of Na₃MnTi(PO₄)₃ only containing high earth-abundance elements is regarded as one of the most promising cathodes for the applicable Na-ion batteries due to its desirable cycling stability and high safety. However, the voltage hysteresis caused by Mn²⁺ ions resided in Na⁺ vacancies has led to significant capacity loss associated with Mn reaction centers between 2.5–4.2 V. Herein, the sodium excess strategy based on charge compensation is applied to suppress the undesirable voltage hysteresis, thereby achieving sufficient utilization of the Mn²⁺/Mn³⁺ and Mn³⁺/Mn⁴⁺ redox couples. These findings indicate that the sodium excess Na_3.5MnTi_0.5Ti_0.5(PO₄)₃ cathode with Ti⁴⁺ reduction has a lowest Mn²⁺ occupation on the Na⁺ vacancies in its initial composition, which can improve the kinetics properties, finally contributing to a suppressed voltage hysteresis. Based on these findings, it is further applied the sodium excess route on a Mn-richer phosphate cathode, which enables the suppressed voltage hysteresis and more reversible capacity. Consequently, this developed Na_3.6Mn_1.15Ti_0.85(PO₄)₃ cathode achieved a high energy density over 380 Wh kg⁻¹ (based on active substance mass of cathode) in full-cell configurations, which is not only superior to most of the phosphate cathodes, but also delivers more application potential than the typical oxides cathodes for Na-ion batteries.     

Toward Flexible Embodied Energy: Scale-Inspired Overlapping Lithium-Ion Batteries with High-Energy-Density and Variable Stiffness

High performance flexible batteries are essential ingredients for flexible devices. However, general isolated flexible batteries face critical challenges in developing multifunctional embodied energy systems, owing to the lack of integrative design. Herein, inspired by scales in creatures, overlapping flexible lithium-ion batteries (FLIBs) consisting of energy storage scales and connections using LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523) and graphite electrodes are presented. The scale-dermis structure ensures a high energy density of 374.4 Wh L⁻¹ as well as a high capacity retention of 93.2% after 200 charge/discharge cycles and 40 000 bending times. A variable stiffness property is revealed that can be controlled by battery configurations and deformation modes. Furthermore, the overlapping FLIBs can be housed directly into the architecture of several flexible devices, such as robots and grippers, allowing to create multifunctionalities that go far beyond energy storage and include load-bearing and variable flexibility. This study broadens the versatility of FLIBs toward energy storage structure engineering of flexible devices.     

Amorphization Boost Multi-Ions Storage for High-Performance Aqueous Batteries

Regarding the complex properties of various cations, the design of aqueous batteries that can simultaneously store multi-ions with high capacity and satisfactory rate performance is a great challenge. Here an amorphization strategy to boost cation-ion storage capacities of anode materials is reported. In monovalent (H⁺, Li⁺, K⁺), divalent (Mg²⁺, Ca²⁺, Zn²⁺) and even trivalent (Al³⁺) aqueous electrolytes, the capacity of the resulting amorphous MoO_x is more than quadruple than that of crystalline MoO_x and exceeds those of other reported multiple-ion storage materials. Both experimental and theoretical calculations reveal the generation of ample active sites and isotropic ions in the amorphous phase, which accelerates cation migration within the electrode bulk. Amorphous MoO_x can be coupled with multi-ion storage cathodes to realize electrochemical energy storage devices with different carriers, promising high energy and power densities. The power density exceeded 15000 W kg⁻¹, demonstrating the great potential of amorphous MoO_x in advanced aqueous batteries.     

Probing into Reverse Bias Dark Current in Perovskite Photodiodes: Critical Role of Surface Defects

Minimizing reverse bias dark current density (J_dark) while retaining high external quantum efficiency is crucial for promising applications of perovskite photodiodes, and it remains challenging to elucidate the ultimate origin of J_dark. It is demonstrated in this study that the surface defects induced by iodine vacancies are the main cause of J_dark in perovskite photodiodes. In a targeted way, the surface defects are thoroughly passivated through a simple treatment with butylamine hydroiodide to form ultrathin 2D perovskite on its 3D bulk. In the passivated perovskite photodiodes, J_dark as low as 3.78 × 10^-10 A cm^-2 at -0.1 V is achieved, and the photoresponse is also enhanced, especially at low light intensities. A combination of the two improvements realizes high specific detectivity up to 1.46 × 10¹² Jones in the devices. It is clarified that the trap states induced by the surface defects can not only raise the generation-recombination current density associated with the Shockley–Read–Hall mechanisms in the dark (increasing J_dark), but also provide additional carrier recombination paths under light illumination (decreasing photocurrent). The critical role of surface defects on J_dark of perovskite photodiodes suggests that making trap-free perovskite thin films, for example, by fine preparation and/or surface engineering, is a top priority for high-performance perovskite photodiodes.     

Optoelectronic Synapses and Photodetectors Based on Organic Semiconductor/Halide Perovskite Heterojunctions: Materials,Devices, and Applications

Both photodetectors (PDs) and optoelectronic synaptic devices (OSDs) are optoelectronic devices converting light signals into electrical responses. Optoelectronic devices based on organic semiconductors and halide perovskites have aroused tremendous research interest owing to their exceptional optical/electrical characteristics and low-cost processability. The heterojunction formed between organic semiconductors and halide perovskites can modify the exciton dissociation/recombination efficiency and modulate the charge-trapping effect. Consequently, organic semiconductor/halide perovskite heterojunctions can endow PDs and OSDs with high photo responsivity and the ability to simulate synaptic functions respectively, making them appropriate for the development of energy-efficient artificial visual systems with sensory and recognition functions. This article summarizes the recent advances in this research field. The physical/chemical properties and preparation methods of organic semiconductor/halide perovskite heterojunctions are briefly introduced. Then the development of PDs and OSDs based on organic semiconductor/halide perovskite heterojunctions, as well as their innovative applications, are systematically presented. Finally, some prospective challenges and probable strategies for the future development of optoelectronic devices based on organic semiconductor/halide perovskite heterojunctions are discussed.