On the coherent interference suppression using a spatiallysmoothing adaptive array

The behavior of a spatially smoothing adaptive array is examined. An expression for the weight vector is first derived. Using the array gain on the desired signal and the coherent interference is obtained. Then the expression for output signal-to-noise (SNR) is derived. It shows that the performance of the spatially smoothing array depends on the number of the subarrays, the angle separation, relative power and initial phase difference between the desired signal and the coherent interference. For good interference suppression it is found that the magnitude of the phase difference of the incident and interference signals must be greater than the beamwidths of both the subarray and the equivalent array. There is also a tradeoff between increasing the groups of subarrays and decreasing the number of elements in the subarrays. Computer simulation results are given that validate the analysis     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Design and simulation of waveguide electrooptic beam deflectors

Numerical simulation based on the scalar beam propagation method, was used to investigate the performance of waveguide electrooptic beam deflectors. The deflectors under investigation consist of a stack of electrooptically controlled prisms in a waveguide. The results were compared to earlier simplified analysis. It was found that for given overall device dimensions, the number of interfaces between prisms in a prism-type electrooptic deflector has significant influence on the device performance when it is small. To avoid wavefront distortion, unwanted reflection from the interfaces, and asymmetry in the deflection angles caused by small number of interfaces, one should use more than about ten interfaces in a typical deflector. Additional insights of device operation and design issues are discussed     

Effects of annealing treatment on the properties of MEH-PPV/titania hybrids prepared via in situ sol-gel reaction

A uniform poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylenevinylene] (MEH-PPV)/titania hybrid film was successfully prepared by an in situ sol-gel reaction of titanium isopropoxide (TIP) in the presence of MEH-PPV/2-chlorophenol solution. The annealing treatment increased the conversion of TIP to titania as determined from evidence of the formation of Ti-O-Ti bonds in the Fourier transform infrared (FTIR) spectrum. Scanning electronic microscope (SEM) photographs showed that the morphology and distribution of titania in the hybrid film were strongly related to the amount of water in the in situ sol-gel reaction. The thermal stability of MEH-PPV/titania hybrids was enhanced by the annealing treatment. Small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) analyses indicated that annealing treatment promoted the ordered aggregation of the MEH-PPV chains and crystallization of titania to a certain extent. The blue shift in Ultraviolet-visible (UV-vis) absorption of pure MEH-PPV after annealing was ascribed to the small extent of decomposition and coil conformation which occurred at high temperature. A more-obvious blue shift for the hybrids was observed, which resulted from irregular aggregation and coil conformation of the MEH-PPV chains induced by heterogeneous point, TIP (titania). The red shift in the photoluminescent (PL) emission for pure MEH-PPV resulted from a certain extent of ordered aggregation after annealing. However, only a slight red shift in the PL emission peak for the hybrids was found due to the hindrance of ordered aggregation of MEH-PPV chains in the presence of TIP (titania).     

Nucleophilic substitution by arenethiolates at the carbene carbon of pentacarbonyl(methoxymethylcarbene)-metal(o) complexes (metal = Cr,Mo, or W)

The phenylthiocarbene complexes, [(CO)₅MC(CH₃)(SPh)] (M = Cr, Mo, or W) have been prepared in good yield by the reaction of [(CO)₅MC(CH₃)(OCH₃)] (M = Cr, Mo, or W) with NaSPh in benzene/methanol in the presence of HCl. A series of para-substituted phenylthiocarbene complexes of tungsten. [(CO)₅WC(CH₃)SC₆H₄Y)], (Y = p-Br, p-F, p-H, p-CH₃, p-OCH₃ or p-OH) have also been prepared by the reaction of the appropriate arenethiolate ion with [(CO)₅WC(CH₃)(OCH₃)]. Poor nucleophiles such as p-nitrobenzenethiolate and pentafluorobenzenethiolate did not react with [(CO)₅WC(CH₃)(OCH₃) to form the corresponding phenylthiocarbene complex. A mechanism accounting for the formation of these phenylthiocarbene complexes is proposed. The complexes have been characterized by their infrared, electronic, mass, ¹H NMR, and ¹³C NMR spectra. These spectroscopic data have been used to establish the structure of these complexes in solution and indicate that the phenyl ring bonded to sulfur is probably not coplanar with the “carbene” plane.     

Self-assembly of dendrimers by slippage

[reaction: see text] A dendrimer with rotaxane-like characteristics has been assembled under thermodynamic control from complementary wedge-shaped precursors by slippage in CH(2)Cl(2). The driving force for the self-assembly process is the molecular recognition that exists as a result of [N(+)-H.O] and [C-H.O] hydrogen bonds between an NH(2)(+) center in one Fréchet-type benzyl ether wedge and a dibenzo[24]crown-8 unit that links the other two such wedges.     

Oxidations of 4- and 3-Aminopyridinepentaammineruthenium(ii) Complexes by Ethylenediaminetetraacetatocobaltate(III)

Redox reactions of Co(edta)^? with Ru(NH₃)₅L²⁺ (L = 3- and 4-aminopyridine (AmPy)) were found to follow an outer-sphere electron transfer mechanism. The specific rate constants are (3.26 ± 0.03) × 10² and (3.07 ± 0.04) × 10₃ M^?1S^?1, for L = 3- and 4-AmPy, respectively, at μ, = 0.10 M LiClO₄, pH = 8.0 (tris) and T = 25 °C. The rate constants of oxidations for a series of Ru(NH₃)₅L²⁺ complexes are higher than those of the corresponding Fe(CN)₅L_3- complexes by factors of 4 to 15 even after corrections for differences in reduction potentials and in charges of the complexes. Nonadiabaticity in the reactions of Fe(CN)₅L3 complexes may account for the difference in the relative reactivities.     

A rotaxane-like complex with controlled-release characteristics

A rotaxane-like complex, based on a dumbbell-shaped component containing an NH(2)(+) recognition site for a [25]crown-8 ring component and a slippage stopper in the form of a p-(tert-butyl)phenyl group, has been synthesized by a "threading-followed-by-stoppering" approach. The half-life for dissociation of this complex, which is very sensitive to its environment, can be varied from minutes to months by changing the temperature and the polarity of the solvent.