Adsorption Kinetic Characteristics of H2S on Activated Carbon

This study compared H₂S adsorption kinetic parameters in both grain adsorption and column adsorption systems. Results indicated that when the nondimensional mass transfer parameter for adsorption column design was included, the axial dispersion (Pe > 1, < 1) and external film resistance (B 1) could be neglected, the fluid viscosity effect was small (Sc = 0.76), and the adsorbate affinity was fine (). Surface and pore diffusion controlled the adsorbent and fluid mass transfer. In addition, spent activated carbon could be treated by a thermal process and then impregnated with NaOH. After the pretreatment, the spent activated carbon could be used for H₂S adsorption. Furthermore, we also propose that the H₂S adsorption reaction on the carbon is due to the formation of sulfur crystals.     

Metal Oxide Film Anodes in the Electrolysis of Water or Brine

Metal (M) oxide (M: Ir, Os, Pd, Pt, Rh, Ru) together with MaO₂ and MnO₂ alone, were coated on SnO₂ films and the anode behavior was examined in 1.0 N H₂SO₄, 1.0 N NaOH and 1.0, N NaCl aqueous solutions at 25°. The results are compared with those of DSA and of metallic Pt.     

A selective voltammetric method for uric acid detection at Nafion(R)-coated carbon paste electrodes

A square-wave voltammetric method together with Nafion®-coated carbon paste electrodes were used for the selective determination of uric acid in the presence of a high concentration of ascorbic acid. Since the oxidation potential of uric acid is about 200 mV more positive than that of ascorbic acid at the Nafion®-coated carbon paste electrode, the selectivity can be greatly improved simply by applying an electrolysis potential of +0.4 V vs. Ag/AgCl where only ascorbic acid is oxidised. The acceptable tolerance of ascorbic acid concentration for the determination of uric acid is as high as 1.5 mM. With 30 s of electrolysis time, a linear calibration curve is obtained over the 0–50 μM range in 0.05 M citrate buffer solution, pH 4.0, with slope (μA/μM) and correlation coefficient of 0.34 and 0.9984, respectively. The detection limit (3σ) is 0.25 μM. The practical analytical utility is illustrated by selective measurements of uric acid in human urine without any preliminary treatment.     

Selection of terms for a CI wavefunction to preserve potential surface features

A cumulative selection procedure for choosing configuration functions for inclusion in CI calculations is described. The objective of the method is to obtain equal energy loss, relative to unselected calculations, for different states and different regions of the potential surface. Results obtained from calculations on the BH molecule indicate an overall advantage in comparison to the threshold selection procedure, particularly with regard to molecular geometry changes.     

Synthesis and Mesogenic Properties of Liquid Crystals Containing Terminal Cyclohexylmethanol,Cyclopentylmethanol, Cyclobutylmethanol and Cyclopropylmethanol Moiety

Four series of compounds 11?50 containing terminal alicyclic rings such as cyclohexylmethyl, cyclopentylmethyl, cyclobutylmethyl, and cyclopropylmethyl rings were synthesized and their liquid crystal behavior studied. The ring size and the length of flexible alkoxy chain influence the phase formation in different ways. While the smaller ring and the shorter alkoxy chain tend to favor the formation of the N phase, the larger ring and the longer alkoxy chain tend to favor the formation of the SmC phase. All the compounds except 11 and 21 exhibit SmA phases. The widest temperature range of the N, SmA, and SmC phases are found in the compounds 41 , 46 , and 20 , respectively, which are 75 °C for 41 , 115 °C for 46 , and 100 °C for 20 .     

Studies on the thermotropic liquid-crystalline polymer. VIII. Synthesis and properties of fully aromatic poly(ester)s and poly(amide-ester)s containing p-phenylene diacrylic group

Three series of polymers containing p-phenylene diacrylic group were prepared by direct polycondensation in the presence of diphenylchlorophosphate and pyridine. Series I was prepared from p-phenylene bis(acrylic acid) with various hydroquinones. Series II was prepared from p-phenylene bis (β-cyano acrylic acid) with methylhydroquinone. Series III was prepared from 3-methyl-4-aminophenol with p-phenylene bis(acrylic acid) or p-phenylene bis(β-cyano acrylic acid), respectively. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). It was found that these polymers, except IIIb , exhibit thermotropic liquid-crystalline properties and show threaded or Schlieren texture under the optical polarizing microscopic observation. Furthermore, the melting temperatures of these polymers were decreased in the range of 254–354°C by incorporating with p-phenylene diacrylic group into the main chain. © 1993 John Wiley & Sons, Inc.     

Influence of the mobile phase on salmon calcitonin analysis by reversed-phase liquid chromatography

The retention properties of calcitonins on a reversed-phase column are examined using salmon calcitonin as the model compound. The effect of the concentration of organic modifier, buffer strength, pH of the mobile phase, and ion-pair reagent are studied. In the absence of an ionic modifier in the eluent the calcitonin peak shapes are not symmetrical. The addition of 0.1% trifluoroacetic acid (TFA), however, results in good peak characteristics without the need to add nonvolatile salts. The retention of the calcitonins was found to be very sensitive to the concentration of the organic modifier (acetonitrile) present in the mobile phase. A change of pH between 2 and 5 has only a slight effect of the k' of salmon calcitonin, but the k' increases significantly at higher pH values. The addition of a phosphate buffer to the mobile phase and an increase in the buffer concentration (0-0.2 M) causes a decrease in the retention of salmon calcitonin. Evidence shows that reproducible, quantitatively measurable data can be obtained using reversed-phase chromatography if the ion-pairing reagent and organic modifier concentrations are carefully controlled. The system also shows a good selectivity for the calcitonin series. Therefore, both highly selective methods (qualitative) as well as quantitative methods for analytical, pharmaceutical, and manufacturing use can be developed by adjusting the high-performance liquid chromatography (HPLC) conditions as discussed.     

Fragmentation processes of methylbutyl trifluoroacetates studied by tandem quadrupole mass spectrometry and isotope labeling

The fragmentation patterns of 3-methyl-2-butyl trifluoroacetate and 2-methyl-2-butyl trifluoroacetate were investigated by GC/MS/MS, with electron impact and collision-induced dissociation, on regular and isotope-labeled (deuterium and ¹⁸O) esters. The atoms found in various fragments could be traced back to specific positions in the parent molecules. In this way, molecular rearrangements potentially occurring during the formation of esters by trifluoroacetolysis of 3-methyl-2-butyl p-toluenesulfonate or trifluoroacetic acid addition to various 2-methylbutenes could be shown. Rearrangements also occurred during the fragmentation, particularly during the expulsion of the small fragments CO, C₂H₄ and F₂CO. For the decompositions of oxygen-containing ions these rearrangements were highly specific. By contrast, alkyl cations lead to fragments that are fully scrambled (statistical label distribution). Alkene radical cations ([C_nH_2n]^{+ ˙}) fragment to daughter ions that are extensively, but less than statistically scrambled. Hydrogen scrambling may also occur in fluoroalkyl cation fragments.     

Sedimentation of a composite particle in a spherical cavity

The boundary effect on the sedimentation of a colloidal particle is investigated theoretically by considering a composite sphere, which comprises a rigid core and an ion-penetrable membrane layer, in a spherical cavity. A pseudo-spectral method is adopted to solve the governing electrokinetic equations, and the influences of the key parameters on the sedimentation behavior of a particle are discussed. We show that both the qualitative and quantitative behaviors of a particle are influenced significantly by the presence of the membrane layer. For example, if the membrane layer is either free of fixed charge or positively charged and the surface potential of the rigid core is sufficiently high, the sedimentation velocity has a local minimum and the sedimentation potential has a local maximum as the thickness of the double layer varies. These local extrema are not observed when the membrane layer is negatively charged. If the double layer is thin, the influence of the fixed charge in the membrane layer on the sedimentation potential is inappreciable.     

Synthesis of Insect Sex Pheromones and Their Homologues I. (Z,E)-9, 11-Alkadienyl Acetates

(Z, E)-9, 11-Tetradecadienyl-l-acetate (1), a major component of the sex pheromone of Spodoptera litura (F.), and (Z, E}-9, 11-pentadecadienyl-1-acetate (2) were synthesized by the Wittig reaction between (E)-2-alkenal (3) and the ylid derived from 9-hydroxynonyltriphenylphosphonium bromide (4).