冠醚菁染料及其中间体的特征红外光谱

本文首次报道冠醚菁染料3,3’-二乙基-5,6,5’,6’-双骈-(15-冠-5)-硫碳菁碘盐(1)和3,3’-二乙甲基-5,6-骈-(15-冠-5)-硫碳菁碘盐(2)以及合成中间体:4’-溴5’-硝基-苯骈-15-冠-5(3),2.2’-二硝基-4,5,4’,5’-双骈-(15-冠-5)-二本基二硫化物(4),2-甲基-5,6-骈-(15-冠-5)-苯骈噻唑(5)和2-甲基-3-乙基-5,6-骈-(15-冠-5)-苯骄噻唑碘盐(6)的特征红外光谱图。     

磺化聚苯硫醚铑配合物催化剂初探

苯硫醚具有与三苯基磷相似的配位化学性能,膦类配体具有比苯硫醚强的络合能力,但毒性较大,热稳定性和抗氧稳定性不如苯硫醚类配体。能否以含有机硫的配体替代膦类配体,这是开发新型催化剂的一个值得探索的方向。聚苯硫醚经发烟硫酸磺化后,可制得水溶性的磺化聚苯硫醚。经XPS测定,磺化度为     

钇与2-(4′-氯-2′-膦酰基一苯偶氮)-7-(2′,6′-二溴-4′-氯-一苯偶氮)-1,8-二羟基-3,6-萘二磺酸配位反应动力学研究和机理探讨

用停流分光光度法获得反应的经验速率方程为R=k[y(H_2O~n)~(3+)]·[H_6R]·[H~+]~(-1)。参考Eigen-Tamm机理和测得的动力学参数,拟出了反应的可能机理。     

A novel small-molecule near-infrared II fluorescence probe for orthotopic osteosarcoma imaging

Osteosarcoma is the most common primary malignant tumor of bone, particularly among children and adolescents. Advances in imaging, surgical techniques, and implants have dramatically reduced the need for amputation in the past three decades.Recently, in vivo fluorescence imaging in the second near-infrared window(NIR-II, 1,000–1,700 nm) shows impressive advantages of deeper tissue penetration and higher spatial resolution, which makes it a promising tool for the early diagnosis and post-operative observation of Osteosarcoma. To the best of our knowledge, this paper is the first time to develop a novel NIR-II fluorescence probe conjugated with an osteosarcoma targeted oligopeptide for molecular tumor imaging in a xenograft orthotopic osteosarcoma mouse model.     

The Study on the Thermal Stability of CLA in Egg Yolk

Conjugated linoleic acids (CLA) have been a subject of extensive investigation for their anticarcinogenic, hypolipidemic, antiatherosclerotic and immune-enhancing activities. Stability of CLA in foods has not received much attention by both academics and industry. Although CLA has shown many beneficial effects, its decomposition must be prevented when CLA in foods is processed, stored and transported. However, no study to date has addressed the stability of CLA in foods. The present study was carried out further to examine the stability of CLA in egg yolk during the storage and frying, using gas liquid chromatography (GLC) and silver ion high-performance liquid chromatography (Agt-HPLC). The eggs, containing 4.0% CLA per gramme of egg yolk, were 40s. Either storage for 6 months or frying for 40 s did not significantly change the composition of CLA in egg yolk. However, the degradation of CLA was statistically significant when the CLA components of egg yolk protected CLA from degradation. It is concluded that CLA is well preserved in egg before it is consumed.     

Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.     

导电复合材料葡萄糖氧化酶传感器的研究

报导了用乙基纤维素和乙炔黑获得的导电复合材料构成的葡萄糖氧化酶生物传感器的制备方法.讨论了多种因素对该生物传感器响应电流的影响.测得此电极酶催化反应的活化能为40.3 kJ•mol－1. AFM实验表明，用环己烷洗去石蜡的导电复合材料 葡萄糖氧化酶生物传感器具有粒状结构，这有利于酶催化反应的进行.     

Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

Properties of nanobelts and nanotubes measured by in situ TEM.

Characterizing the physical properties of individual nanostructures is challenging because of the difficulty in manipulating the objects of sizes from nanometers to micrometers. Most nanomeasurements have been carried using scanning probe microscopy. In this article, we demonstrate that transmission electron microscopy can be a powerful tool for quantitative measurements of the mechanical and electrical properties of a single nanostructure. Dual-mode resonance of an oxide nanobelt has been observed, and its bending modulus has been measured. An in situ technique was demonstrated for measuring the work function at the tip of a carbon nanotube. The ballistic quantum conductance of a multiwalled carbon nanotube was observed at room temperature using the setup in TEM. It is concluded that in situ measurement by directly linking structure with property is a future direction of electron microscopy.     

Indirect Determination of Captopril with Sodium Nitrate and Thiocyanate by Floatation Separation of Copper

A new method for indirect determination of captopril (CPT) with NaNO₃ and NH₄SCN by floatation and separation of copper has been studied. In the weak acid, a small amount of Cu(II) can be reduced to Cu(I) by CPT, then Cu(I) reacted with the SCN, which can float on the surface of the liquid phase with NaNO₃. A good linear relationship is observed between the floatation yield (E%) of Cu(II) and the amount of captopril. The linear range is 2?32 mg/L. On the ground, captopril can be indirectly determined by determining E(%) of Cu(II). The method is simple, rapid, reliable and has good selectivity. The developed method can be applied to indirect determination of captopril with satisfactory results.