Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.     

Structures, relative stability and dissociation of [Si,N,C,O]2+ isomers

Fifteen isomers of [Si,N,C,O]²⁺ system are obtained at UB3LYP/6-311G(d) and UCCSD(T)/6-311+G(2df) (single-point) levels. The analyses are made for predicting the structures of optimized isomers, while ionic fragments with lower energies are suggested. The calculated results indicate that linear isomer SiNCO²⁺(²Π) is thermodynamically the most stable species in [Si,N,C,O]²⁺ system, followed by linear SiOCN²⁺ (²Π), SiCNO²⁺ (²Π), and SiC(NO) (²A) with NCO three-membered ring. The order of stability of several kinetically stable isomers is SiNCO²> SiCNO²⁺ (²Π)>SiOCN²⁺>SiC(NO)²⁺>OSiNC²⁺ (²Π). The obtained results by analyzing the isomerizations and ionic fragment patterns show that the signal peaks of [Si,N,C,O]²⁺ are attributed to the contribution of linear SiNCO²⁺ species, which is metastable and can dissociate to the ionic fragments in the mass spectrometry experiments.     

A kinetic stability study of <Emphasis Type="Italic">M</Emphasis>N<Subscript>5</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Li,Na, K,and Rb)

A structure and kinetic stability study on some complexes with the general formula MN₅, where M are the alkali-metal atoms, Li, Na, K, and Rb, has been carried by using hybrid density functional methods. Complex B (C_2v) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Pyramidal structures A (C_5v) are kinetically unstable and they rapidly rearrange to the most stable planar structures B. At the QCISD(T)/6-311 + G*//B3LYP/6-311 + G* + ZPE (B3LYP/6-311 + G*) level, the decomposition barrier heights of LiN₅-B, NaN₅–B, KN₅-B, and RbN₅-B are predicted to be 19.9, 22.0, 22.5, and 23.0 kcal/mol, respectively. In addition, the rate constants of the decomposition reaction MN₅-B MN₃ + N₂ (M + Li, Na, K, and Rb) are also predicted using conventional transition state theory and canonical variational transition state theory, respectively.     

Voltammetric study of the interaction of lomefloxacin (LMF)–Mg(II) complex with DNA and its analytical application

The voltammetric behavior of the LMF-Mg(II) complex with DNA at a mercury electrode is reported for the first time. In NH₃–NH₄Cl buffer (pH=9.10), the adsorption phenomena of the LMF–Mg(II) complex were observed by linear sweep voltammetry. The mechanism of the electrode reaction was found to be a reduction of LMF in the complex, and the composition of the LMF–Mg(II) complex is 2:1. In the presence of calf thymus DNA (ctDNA), the peak current of LMF–Mg(II) complex decreased considerably, and a new well-defined adsorptive reduction peak appeared at −1.63 V (vs. SCE). The electrochemical kinetic parameters and the binding number of LMF–Mg(II) with ctDNA were also obtained. Moreover, the new peak currents of LMF–Mg(II)–DNA system increased linearly correlated to the concentration of DNA in the 4.00×10⁻⁷–2.60×10⁻⁶ g ml⁻¹ range when the concentrations of LMF–Mg(II) complex was fixed at 5.00×10⁻⁶ mol l⁻¹, with the detection limits of 2.33×10⁻⁷ g ml⁻¹. An electrostatic interaction was suggested by electrochemical method.     

Tricarbonyl(dialkylamidocyclohexa-1,3-diene)iron: Preparation,Isomerization and Stereochemistry

The direct reaction of iron pentacarbonyl with diethylamidocyclohexadiene gave three isomeric tricarbonyliron complexes, 1, 2 and 3. Only 1 isomerized to give 2 under acidic conditions, whereas 3 remained unchanged. The chemical properties of the tricarbonyl(amidocyclohexadiene)iron complexes differed from those of the tricarbonyl(carboxycyclohexadiene)iron complexes. Complex 3 which underwent no hydride abstraction with triphenylmethyl hexafluorophosphate, has an exo stereochemistry.     

Quantitative volatilization of tin as mixed halides and its application in metal analysis

Proposed in this paper is an improved method for removal of tin as the matrix element by volatilization in an anhydrous medium as mixed halides of different composition. Any one of them boils at a lower temperature than SnBr₄. This ternary system enhances the eventual recombination of temporarily dissociated species to volatile ones, thus making the process quicker and more efficient. The presence of 2 mg of Pb(II) suffices to prevent Bi(III) from loss due to volatilization.     

Synthesis and Characterization of (βDiketonate)(7-norbornadienyl acetate)Copper(l) Complexes,Single-Crystal Structure of (hfac)Cu(7-AcO-NBD)

Copper(I) complexes of general formula (β-diketonate)Cu(7-AcO-NBD), where 7-AcO-NBD = 7-norbornadienyl acetate and β-diketonate = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate (1), 1,1,1-trifluoro-2,4-pentanedionate (2), 2,4-pentanedionate (3), 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionate (4), 4,4,4-trifluoro-1-phenyl-1,3-butanedionate (5), were prepared from reactions of CuCl with Na(β-diketonate) in the presence of 7-AcO-NBD. AH compounds were characterized by elemental analyses, ¹H, ¹³C, ¹⁹F NMR and IR spectra. Single-crystal strucutre of compound 1 was determined by X-ray diffraction analysis that showed a mononuclear copper species with coordination of a chelating β-diketonate ligand through two oxygen atoms and the 7-AcO-NBD through its C? C double bond and an oxygen atom in the solid state. For compound 1, the crystal data are: triclinic, space group $ {\rm P}\bar 1 $, a= 5.4519(14) Å, b= 11.852(3) Å, c= 13.304(3) Å, α = 74.721(20)° β = 80.220(20)°, γ= 76.848(19)°, Z = 2, R_F = 0.060 and R_w = 0.064. Hot-wall chemical vapor deposition experiments revealed that compound 1 is suitable as a precursor for deposition of copper films in the temperature range 170–260 °C.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

Novel Water Soluble Fluorescent Trimethine Indocyanines Containing N-ρ-Carboxybenzyl Group

Indocyanine dyes as fluorescent labeling reagents have been used in bioanalysis1,2. Arylsulfonate indocyanine dyes 1d and 1e developed by Waggoner A. S. et al.3,4 have excellent fluorescent properties combined with good aqueous solubility, are a new generation of fluorescent label compounds for proteins, oligonucleotides and other compounds containing hydroxyl, mercaptol or primary amine groups5. However, photostability of these dyes has been a problem. Z. G. YAO et al.6 reported that p…